RESUMO

This study used the roto-evaporation technique to engineer a 6 mm three-layer polyurethane vascular graft (TVG) that mimics the architecture of human coronary artery native vessels. Two segmented polyurethanes were synthesized using lysine (SPUUK) and ascorbic acid (SPUAA), and the resulting materials were used to create the intima and adventitia layers, respectively. In contrast, the media layer of the TVG was composed of a commercially available polyurethane, Pearlbond 703 EXP. For comparison purposes, single-layer vascular grafts (SVGs) from individual polyurethanes and a polyurethane blend (MVG) were made and tested similarly and evaluated according to the ISO 7198 standard. The TVG exhibited the highest circumferential tensile strength and longitudinal forces compared to single-layer vascular grafts of lower thicknesses made from the same polyurethanes. The TVG also showed higher suture and burst strength values than native vessels. The TVG withstood up to 2087 ± 139 mmHg and exhibited a compliance of 0.15 ± 0.1%/100 mmHg, while SPUUK SVGs showed a compliance of 5.21 ± 1.29%/100 mmHg, akin to coronary arteries but superior to the saphenous vein. An indirect cytocompatibility test using the MDA-MB-231 cell line showed 90 to 100% viability for all polyurethanes, surpassing the minimum 70% threshold needed for biomaterials deemed cytocompatibility. Despite the non-cytotoxic nature of the polyurethane extracts when grown directly on the surface, they displayed poor fibroblast adhesion, except for SPUUK. All vascular grafts showed hemolysis values under the permissible limit of 5% and longer coagulation times.

RESUMO

Antimicrobial resistance (AMR) developed by microorganisms is considered one of the most critical public health issues worldwide. This problem is affecting the lives of millions of people and needs to be addressed promptly. Mainly, antibiotics are the substances that contribute to AMR in various strains of bacteria and other microorganisms, leading to infectious diseases that cannot be effectively treated. To avoid the use of antibiotics and similar drugs, several approaches have gained attention in the fields of materials science and engineering as well as pharmaceutics over the past five years. Our focus lies on the design and manufacture of polymeric-based materials capable of incorporating antimicrobial agents excluding the aforementioned substances. In this sense, two of the emerging techniques for materials fabrication, namely, electrospinning and 3D printing, have gained significant attraction. In this article, we provide a summary of the most important findings that contribute to the development of antimicrobial systems using these technologies to incorporate various types of nanomaterials, organic molecules, or natural compounds with the required property. Furthermore, we discuss and consider the challenges that lie ahead in this research field for the coming years.

RESUMO

The development of accurate drug delivery systems is one of the main challenges in the biomedical field. A huge variety of structures, such as vesicles, nanoparticles, and nanofibers, have been proposed as carriers for bioactive agents, aiming for precision in administration and dosage, safety, and bioavailability. This review covers the use of electrohydrodynamic techniques both for the immobilization and for the synthesis of vesicles in a non-conventional way. The state of the art discusses the most recent advances in this field as well as the advantages and limitations of electrospun and electrosprayed amphiphilic structures as precursor templates for the in situ vesicle self-assembly. Finally, the perspectives and challenges of combined strategies for the development of advanced structures for the delivery of bioactive agents are analyzed.

RESUMO

Human Adipose-Derived Mesenchymal Stem/Stromal Cells (hAD-MSCs) have great potential for tissue regeneration. Since transplanted hAD-MSCs are likely to be placed in a hypoxic environment, culturing the cells under hypoxic conditions might improve their post-transplantation survival and regenerative performance. The combination of hAD-MSCs and PCL-nHA nanofibers synergically improves the contribution of both components for osteoblast differentiation. In this work, we hypothesized that this biomaterial constitutes a hypoxic environment for hAD-MSCs. We studied the cellular re-arrangement and the subcellular ultrastructure by Transmission Electron Microscopy (TEM) of hAD-MSCs grown into PCL-nHA nanofibers, and we compared them with the same cells grown in two-dimensional cultures, over tissue culture-treated plastic, or glass coverslips. Among the most evident changes, PCL-nHA grown cells showed enlarged mitochondria, and accumulation of glycogen granules, consistent with a hypoxic environment. We observed a 3.5 upregulation (p = 0.0379) of Hypoxia Inducible Factor (HIF)-1A gene expression in PCL-nHA grown cells. This work evidences for the first time intra-cellular changes in three-dimensional compared to two-dimensional cultures, which are adaptive responses of the cells to an environment more closely resembling that of the in vivo niche after transplantation, thus PCL-nHA nanofibers are adequate for hAD-MSCs pre-conditioning.

Assuntos

Células-Tronco Mesenquimais , Nanofibras , Humanos , Alicerces Teciduais/química , Durapatita/química , Durapatita/metabolismo , Poliésteres/química , Materiais Biocompatíveis/química , Diferenciação Celular , Nanofibras/química , Engenharia Tecidual/métodos

RESUMO

The main strategies against Triatoma infestans (primary vector responsible for the Chagas disease transmission) are the elimination or reduction of its abundance in homes through the application of insecticides or repellents with residual power, and environmental management through the improvement of housing. The use of plant-derived compounds as a source of therapeutic agents (i.e., essential oils from aromatic plants and their components) is a valuable alternative to conventional insecticides and repellents. Essential oil-based insect repellents are environmentally friendly and provide reliable personal protection against the bites of mosquitoes and other blood-sucking insects. This study investigates, for the first time to our knowledge, the potential repellent activity of Zuccagnia punctata essential oil (ZEO) and poly(ε-caprolactone) matrices loaded with ZEO (ZEOP) prepared by solvent casting. The analysis of its essential oil from aerial parts by GC-FID and GC-MS, MS allowed the identification of 25 constituents representing 99.5% of the composition. The main components of the oil were identified as (-)-5,6-dehydrocamphor (62.4%), alpha-pinene (9.1%), thuja-2, 4 (10)-diene (4.6%) and dihydroeugenol (4.5%). ZEOP matrices were homogeneous and opaque, with thickness of 800 ± 140 µm and encapsulation efficiency values above 98%. ZEO and ZEOP at the lowest dose (0.5% wt./wt., 96 h) showed a repellency of 33 and 73% respectively, while at the highest dose (1% wt./wt., 96 h) exhibited a repellent activity of 40 and 66 %, respectively. On the other hand, until 72 h, ZEO showed a strong repellent activity against T. infestans (88% repellency average; Class V) to both concentrations, compared with positive control N-N diethyl-3-methylbenzamide (DEET). The essential oils from the Andean flora have shown an excellent repellent activity, highlighting the repellent activity of Zuccagnia punctata. The effectiveness of ZEO was extended by its incorporation in polymeric systems and could have a potential home or peridomiciliary use, which might help prevent, or at least reduce, Chagas' disease transmission.

Assuntos

Fabaceae/química , Repelentes de Insetos/farmacologia , Mosquitos Vetores/efeitos dos fármacos , Óleos Voláteis/farmacologia , Triatoma/efeitos dos fármacos , Animais , Cânfora/análogos & derivados , Cânfora/análise , Eugenol/análogos & derivados , Eugenol/análise , Repelentes de Insetos/química , Óleos Voláteis/química , Poliésteres/química

RESUMO

3D printing has emerged as vanguard technique of biofabrication to assemble cells, biomaterials and biomolecules in a spatially controlled manner to reproduce native tissues. In this work, gelatin methacrylate (GelMA)/alginate hydrogel scaffolds were obtained by 3D printing and 14-3-3ε protein was encapsulated in the hydrogel to induce osteogenic differentiation of human adipose-derived mesenchymal stem cells (hASC). GelMA/alginate-based grid-like structures were printed and remained stable upon photo-crosslinking. The viscosity of alginate allowed to control the pore size and strand width. A higher viscosity of hydrogel ink enhanced the printing accuracy. Protein-loaded GelMA/alginate-based hydrogel showed a clear induction of the osteogenic differentiation of hASC cells. The results are relevant for future developments of GelMA/alginate for bone tissue engineering given the positive effect of 14-3-3ε protein on both cell adhesion and proliferation.

Assuntos

Proteínas 14-3-3/química , Hidrogéis/química , Osteogênese/fisiologia , Impressão Tridimensional , Tecido Adiposo/metabolismo , Alginatos/química , Adesão Celular , Diferenciação Celular , Proliferação de Células , Reagentes de Ligações Cruzadas , Gelatina , Humanos , Tinta , Células-Tronco Mesenquimais/metabolismo , Metacrilatos/química , Osteogênese/efeitos dos fármacos , Proteínas Recombinantes/química , Viscosidade

RESUMO

The development of three-dimensional (3D) scaffolds with physical and chemical topological cues at the macro-, micro-, and nanometer scale is urgently needed for successful tissue engineering applications. 3D scaffolds can be manufactured by a wide variety of techniques. Electrospinning technology has emerged as a powerful manufacturing technique to produce non-woven nanofibrous scaffolds with very interesting features for tissue engineering products. However, electrospun scaffolds have some inherent limitations that compromise the regeneration of thick and complex tissues. By integrating electrospinning and other fabrication technologies, multifunctional 3D fibrous assemblies with micro/nanotopographical features can be created. The proper combination of techniques leads to materials with nano and macro-structure, allowing an improvement in the biological performance of tissue-engineered constructs. In this review, we focus on the most relevant strategies to produce electrospun polymer/composite scaffolds with 3D architecture. A detailed description of procedures involving physical and chemical agents to create structures with large pores and 3D fiber assemblies is introduced. Finally, characterization and biological assays including in vitro and in vivo studies of structures intended for the regeneration of functional tissues are briefly presented and discussed.

Assuntos

Engenharia Tecidual/métodos , Alicerces Teciduais/química , Eletroquímica , Nanofibras/química , Polímeros/química , Porosidade

RESUMO

The development of biomimetic highly-porous scaffolds is essential for successful tissue engineering. Electrospun nanofibers are highly versatile platforms for a broad range of applications in different research areas. In the biomedical field, micro/nanoscale fibrous structures have gained great interest for wound dressings, drug delivery systems, soft and hard-tissue engineering scaffolds, enzyme immobilization, among other healthcare applications. In this mini-review, electrospun gelatin-based scaffolds for a variety of tissue engineering applications, such as bone, cartilage, skin, nerve, and ocular and vascular tissue engineering, are reviewed and discussed. Gelatin blends with natural or synthetic polymers exhibit physicochemical, biomechanical, and biocompatibility properties very attractive for scaffolding. Current advances and challenges on this research field are presented.

Assuntos

Gelatina/química , Engenharia Tecidual , Alicerces Teciduais , Nanofibras/química , Polímeros

RESUMO

Levofloxacin (LV) is a hydrophilic broad-spectrum antibiotic commonly used in pulmonary treatment against recurrent infections of Pseudomonas aeruginosa, and particularly in cystic fibrosis (CF) disease. In order to study feasible carriers for LV, solid lipid nanoparticles (SLN) of myristyl myristate were prepared by the ultrasonication method in the presence of Pluronic(®)F68 under different experimental conditions and characterized by dynamic light scattering, optical, transmission and scanning electron microscopy for size and morphology. Alternatively, nanostructured lipid carriers (NLCs) were developed to improve LV encapsulation and storage. SLN showed 20.1±1.4% LV encapsulation efficiency, while the NLCs encapsulated 55.9±1.6% LV. NLC formulation exhibited a more controlled release profile than SLN formulation, but both showed a biphasic drug release pattern with burst release at the first 5h and prolonged release afterwards, demonstrated by in vitro tests. The hydrodynamic average diameter and zeta potential of NLC were 182.6±3.2nm and -10.2±0.2mV, respectively, and were stable for at least 3 months. Additionally, DNase type I was incorporated into the formulations as a "smart" component, since the enzyme could help to decrease the viscoelasticity found in the lungs of CF patients and improves the antibiotic diffusion. FTIR, XRD, DSC, TGA and nitrogen adsorption isotherms of the nanoparticles indicate the presence of the loads in a noncrystalline state. The developed formulation showed an active antimicrobial activity against P. aeruginosa and even against other opportunistic pathogens such as Staphylococcus aureus. The presence of LV-loaded NLCs reduced the formation of a bacterial biofilm, which highlighted the significance of the nanodevice as a new alternative for CF treatment.

Assuntos

Sistemas de Liberação de Medicamentos/métodos , Levofloxacino/administração & dosagem , Lipídeos/química , Nanopartículas/administração & dosagem , Antibacterianos/química , Antibacterianos/farmacocinética , Antibacterianos/farmacologia , Biofilmes/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Varredura Diferencial de Calorimetria , Fibrose Cística/tratamento farmacológico , Fibrose Cística/metabolismo , Fibrose Cística/microbiologia , Desoxirribonucleases/química , Portadores de Fármacos/química , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Humanos , Levofloxacino/química , Levofloxacino/farmacologia , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Nanopartículas/química , Nanopartículas/ultraestrutura , Tamanho da Partícula , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/fisiologia , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios X

RESUMO

The goal of this study was to investigate the electrohydrodynamic atomization (EHDA) technology to encapsulate the water-soluble antiretroviral didanosine (ddI) within poly(epsilon-caprolactone) (PCL) particles and stabilize it in the gastric medium where it undergoes fast degradation. A preliminary study employing a one-needle setup enabled the adjustment of the critical process parameters. Then, a configuration of two concentric needles named coaxial electrohydrodynamic atomization (CEHDA) led to the formation of ddI-loaded PCL microcapsules. Scanning electron microscopy analysis showed that the microparticles were spherical and with narrow size distribution. Attenuated total reflectance/Fourier transform infrared spectroscopy confirmed that most of the drug was efficiently encapsulated within the particles, whereas differential scanning calorimetry and X-ray powder diffraction revealed that the drug was preserved mainly in crystalline form. The loading capacity was relatively high (approximately 12% w/w), and the encapsulation efficiency was approximately 100%. In vitro release assays (PBS pH = 7.4) indicated that ddI was released almost completely within 2 h. Moreover, the delayed release was expected to isolate ddI from the biological fluids during the gastric transit. Finally, pharmacokinetics studies in rats showed that ddI-loaded particles lead to a statistically significant increase of the oral bioavailability of almost 4 times and a 2-fold prolongation of the half-life with respect to a ddI aqueous solution, supporting the use of CEHDA as a promising reproducible, scalable and cost-viable technology to encapsulate water-soluble drugs within polymeric particles.