RESUMO

Enzymatic scouring of cotton has established itself (slowly) as a green alternative to alkaline scouring in the textile industry, mostly due to more environmentally friendly processing at lower pH and temperatures and its less aggressive action on the cotton fibers. However, among other limitations, enzyme costs have contributed to impeding its wide acceptance and use. For the first time, in this study, the recycling of the bioscouring bath was evaluated, unlike most current bioscouring that is performed using fresh enzyme solution. Bioscouring of raw knitted cotton fabric was carried out for 30 min with a commercial pectinase (BioPrep® 3000L) at 55 °C and pH 8.5. About 89% of the recovered pectate lyase-containing scouring bath was completed with 11% of fresh enzyme solution and reused in a new bioscouring process under the same conditions. Up to ten reuse cycles were possible maintaining the level of pectin removal and without significant loss in quality of subsequent dyeing. A detailed analysis of the pretreated fabrics is presented. Reusing the scouring bath, reducing the intensive consumption of input materials (enzyme, water, and chemicals) and wastewater generation can be possible, making bioscouring a more attractive and sustainable technique. The process demonstrated is promising and its industrial application is feasible.

Assuntos

RESUMO

The performance of two lignocellulosic biomasses was studied in high-pressure carbon dioxide/water pre-treatment. Sugarcane bagasse and elephant grass were used to produce C5-sugars from hemicellulose and, simultaneously, to promote cellulose digestibility for enzymatic saccharification. Different pre-treatment conditions, with combined severity factor ranging from -1.17 to -0.04, were evaluated and maximal total xylan to xylose yields of 59.2wt.% (34.4wt.% xylooligomers) and 46.4wt.% (34.9wt.% xylooligomers) were attained for sugarcane bagasse and elephant grass, respectively. Furthermore, pre-treated biomasses were highly digestible, with glucan to glucose yields of 77.2mol% and 72.4mol% for sugarcane bagasse and elephant grass, respectively. High-pressure carbon dioxide/water pre-treatment provides high total C5-sugars and glucose recovery from both lignocellulosic biomasses; however it is highly influenced by composition and intrinsic features of each biomass. The obtained results confirm this approach as an effective and greener alternative to conventional pre-treatment processes.

Assuntos

RESUMO

Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids).

Assuntos

RESUMO

Three synthesized compounds, 4-(4-nitrostyryl)phenol, 2,6-dibromo-4-(2,4-dinitrobenzylideneamino)phenol and 2,6-dichloro-4-(2,4-dinitrobenzylideneamino)phenol, were deprotonated to generate the perichromic dyes 2b, 3b and 4b, respectively. These dyes were used as probes to investigate the micropolarity of natural cyclodextrins (CyDs) and it was observed that they interact differently with the CyDs according to the molecular structure of the dye and the diameter of the CyD. The solvatochromic bands of the dyes that interacted with the CyDs were bathochromically shifted, suggesting that the probes were transferred to the hydrophobic interior of the CyD in aqueous solution. Dyes 2b and 4b were found to be very selective for α-CyD and γ-CyD, respectively, while ß- and γ-CyD changed the color of the solution of compound 3b. These dyes were then successfully used in a simple assay that allows the naked-eye discrimination of natural CyDs in aqueous solution, without the need for expensive techniques.

RESUMO

This study describes a procedure for the selective determination of endo- (EG) and exo- (ExG) cellulase activities using filter paper as the sole substrate. The procedure is based on the enzymes mode of action whereby EG activity predominantly forms insoluble reducing sugars and ExG activity soluble reducing sugars. The procedure was developed using filter paper as substrate for hydrolysis with three cellulase preparations of Hypocrea jecorina containing either endoglucanase (EG), predominantly exoglucanase (ExG) or both endo- and exoglucanase activities. Hydrolysis experiments, which were followed assessing the formation of total, soluble and insoluble reducing sugars (RS), showed that up to 30 min of hydrolysis predominantly insoluble reducing sugars were formed, while after this initial hydrolysis stage soluble reducing sugar formation increased significantly, making it thus possible to measure separately EG and ExG activity. FPA activities obtained from the reaction products at different reaction times suggest that EG-activity (FPA(insol)) should be measured between 10 and 20 min of hydrolysis. The proposed procedure allows to evaluate the EG and ExG activity contribution to total cellulase activity and to calculate the endo/exo activity ratio of any cellulase preparation.

Assuntos

RESUMO

The UV-vis spectroscopic behavior of dyes: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2) was investigated in solutions of methyl- beta-cyclodextrin (methyl-beta-CyD), using water, methanol, ethanol, propan-2-ol, butan-1-ol, acetone, acetonitrile, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N,N-dimethylacetamide (DMA), chloroform and dichloromethane as solvents. In aqueous solutions of dye (2) the addition of M-beta-CD leads to a bathochromic shift (of the maximum absorption), showing that the probe was transferred to a microenvironment of lower polarity and suggesting the formation of a 1 : 1 dye (2) : CyD inclusion complex, with a binding constant of 128.5 +/- 3.5 dm(3) mol(-1). Data for dye 2 in alcohols showed hypsochromic shifts, which increased in the following order: methanol < ethanol < propan-2-ol < butan-1-ol. These observations appear to reflect dye-solvent interactions through hydrogen bonding. If dye-solvent interactions are strong, the CyD-dye interactions are consequently weak, but the latter increase in importance when the dye-solvent interaction becomes weaker. With hydrogen-bond accepting solvents, data for both dyes showed clearly increasing hypsochromic shifts following the order: DMSO < DMA < DMF < acetone < acetonitrile. This order is exactly the inverse of the increasing order of basicity of the medium. This indicates that the dominant factor for the observed effects in these solvents is the solvent-CyD interaction through hydrogen bonding involving the hydroxyl groups of the CyD and the basic groups of the solvents. These interactions diminish in intensity if the basic character of the medium is reduced, increasing the capability of the dye to interact with the CyD using its phenoxide donor moiety. The largest hypsochromic shifts were obtained in chloroform (66.0 nm) and dichloromethane (67.5 nm) with dye after addition of methyl-beta-CyD. In these specific situations, solvents display weak basic and acid properties, that enhanced CyD-dye interactions to such an extent that association complexes formed through hydrogen bonding could be detected (K11) values of 24.8 +/- 4.9 dm3 mol(-1) in dichloromethane and 66.1 +/- 8.0 dm3 mol(-1) in chloroform).

RESUMO

Results of dyeing of cotton fabrics with a bifunctional reactive dye were significantly improved when the fabric after bleaching with hydrogen peroxide was treated with catalase for the elimination of hydrogen peroxide residues from the fabrics. Compared to processes with a varying number of washing steps, with and without commercial reducing agents, the consumption of water could be significantly reduced, without altering the final color shade.

RESUMO

Results of dyeing of cotton fabrics with a bifunctional reactive dye were significantly improved when the fabric after bleaching with hydrogen peroxide was treated with catalase for the elimination of hydrogen peroxide residues from the fabrics. Compared to processes with a varying number of washing steps, with and without commercial reducing agents, the consumption of water could be significantly reduced, without altering the final color shade

Assuntos