RESUMO

BACKGROUND: Stage-specific embryonic antigen-4 (SSEA-4) is a marker for the identification of multipotent embryonic cells. It is also positive in neuroepithelial cells, precursor neural cells (NPC), and human dental pulp cells. The aim of this study was to evaluate the potential morphodifferentiation and histodifferentiation to NPC of SSEA-4 positive stem cells from human exfoliated deciduous teeth (SHED). METHODS: A SHED population in culture, positive to SSEA-4, was obtained by magnetic cell separation. The cells were characterized by immunohistochemistry and flow cytometry. Subsequently, a neurosphere assay was performed in a medium supplemented with basic fibroblast growth factor (bFGF) and epidermal growth factor (EGF); afterward, cells were neurodifferenciated with a neurobasal medium. Finally, indirect immunohistochemistry was performed to identify neuronal markers. RESULTS: The morphological and histological changes in the SSEA-4 positive SHEDs were observed after induction with epidermal and fibroblast growth factors in neurobasal culture medium. At the end of induction, the markers Nestin, TuJ-1, and GFAP were identified. CONCLUSIONS: The findings show that SSEA-4 positive SHEDs have a behavior similar to neuronal precursor cells. Our findings indicate that the dental pulp of deciduous teeth is a promising source for regeneration therapies associated with neurodegenerative diseases or peripheral nerve alterations.

Assuntos

RESUMO

Acceleration of wound healing can be achieved with the use of wound dressings. Through the electrospinning technique, a polymeric scaffold composed of two layers was processed: a gelatin and polyvinylpyrrolidone layer with gentamicin, and a second layer of cellulose acetate. The conditions for the electrospinning process were standardized for voltage parameters, feed flow and the distance from the injector to the collector. Once the values of the main variables for the electrospinning were optimized, a three-hour processing time was established to allow the separation of the material from the collector. The obtained material was characterized by observations on scanning electron microscopy, Fourier transform infrared spectroscopy and thermal analysis; contact angle measurement was performed to evaluate wettability properties, and antibacterial activity against Pseudomonas aeruginosa and Staphylococcus aureus were evaluated using the Kirby-Bauer test. The obtained fibers that form the bi-layer scaffold present diameters from 100 to 300 nm. The scaffold presents chemical composition, thermal stability, wettability characteristics and antibacterial activity that fulfill the proposal from this study, based on obtaining a scaffold that could be used as a drug delivery vehicle and a wound dressing material.

RESUMO

The highly toxic species of Chromium in its hexavalent state is an important hazard to the flora and fauna, causing a rupture in balance especially in aquatic environments. The removal of Cr(VI) ions from aqueous solutions using fungal biomass of Rhizopus sp. was investigated under batch experiments. The biomass was produced and treated with NaCl to compare pre-treated and untreated biosorbents capacity. Adsorption of Cr(VI) was investigated with a 23 experimental design to determine the best operational parameters including pH [2.0-4.0], temperature [20-40 °C] and agitation [50-150 rpm]. Maximum Cr(VI) uptake (99%) indicated that pH 2.0 is the optimal for Cr(VI) removal. Linear and non-linear kinetic models were evaluated. The best fitting for linear kinetics was the pseudo-second order linear equation and the Elovich model in its non-linear form, suggesting chemisorption as the controlling step of adsorption. Results followed Langmuir isotherm equation, the qm was 9.95 (mg·g-1) for Rhizopus sp. + NaCl. Thermodynamic parameters were calculated using the adsorption equilibrium constant obtained from Langmuir isotherm and indicated that the adsorption process was spontaneous and endothermic. The surface characteristics of the biomass were analyzed by Fourier transform infrared (FTIR) spectra; the analysis showed the involvement of amino groups in the bonding with Cr(VI). SEM and EDX analysis confirmed the presence of Cr in the biomass after adsorption. The results of these experiments may be utilized for modeling, simulation, and scale-up processes in the future.

Assuntos

RESUMO

In this work, we present the results of an undergrad student from the perspective of its first approach as a principal researcher in a project. In order to gain practical experience, one of the options for students that have interest in pursuing a postgraduate program corresponds to a research stay in a laboratory of their selected field conducting a project for a period of 6 months. In this particular project, a fungal sample was isolated from Parmesan cheese spoilage and its enzymatic activity evaluated. Using simple and standardized protocols, the student was capable of identifying a possible biotechnological application for the isolate by detecting and categorizing the lipolytic activity. Through microculture characterization in potato dextrose agar (PDA) the genus of the sample was determined as Penicillium and confirmed by molecular analysis of the ITS1 and ITS4 regions. In order to examine comprehensively the potential of the new isolate, the extracellular and intracellular enzymatic activities were analyzed as well as four methods of cell rupture. From these results, sonication was determined as the best technique with 211 U/L as a maximum lipolytic value. To finalize the evaluation of the sample, the student determined the optimal pH and temperature as well as the thermotolerance of the crude extract obtaining a residual activity of 13% after 60 minutes of incubation at 45 °C. Upon conclusion of the research we could recognize that through a direct characterization of a fungal isolate using techniques that are widely known, the student was capable of determining and value one of the most interesting capabilities fungi has to offer; enzymatic activity, and that the knowledge obtained from established protocols enables and encourages the students to correlate the source from where they were obtained with potential biotechnological applications. © 2019 International Union of Biochemistry and Molecular Biology, 47(6):681-688, 2019.

Assuntos

RESUMO

OBJECTIVES: Lyme disease is a tick-borne disease caused by infections with Borrelia. Persons infected with Borrelia can be asymptomatic or can develop disseminated disease. Diagnosis and recognition of groups at risk of infection with Borrelia burgdorferi is of great interest to contemporary rheumatology. There are a few reports about Borrelia infection in Mexico, including lymphocytoma cases positive to B. burgdorferi sensu stricto by PCR and a patient with acrodermatitis chronica atrophicans. Veterinarians have an occupational risk due to high rates of tick contact. The aim of this work was to investigate antibodies to Borrelia in students at the Faculty of Veterinary Medicine and Zootechnics, at Nuevo León, Mexico, and determine the antibody profile to B. burgdorferi antigens. MATERIAL AND METHODS: Sera were screened using a C6 ELISA, IgG and IgM ELISA using recombinant proteins from B. burgdorferi, B. garinii and B. afzelii. Sera with positive or grey-zone values were tested by IgG Western blot to B. burgdorferi sensu stricto. RESULTS: All volunteers reported tick exposures and 72.5% remembered tick bites. Only nine persons described mild Lyme disease related symptoms, including headaches, paresthesias, myalgias and arthralgias. None of the volunteers reported erythema migrans. Nine samples were confirmed by IgG Western blot. The profile showed 89% reactivity to OspA, 67% to p83, and 45% to BmpA. CONCLUSIONS: Positive sera samples shared antibody reactivity to the markers of late immune response p83 and BmpA, even if individuals did not present symptoms of Lyme arthritis or post-Lyme disease. The best criterion to diagnose Lyme disease in our country remains to be established, because it is probable that different strains coexist in Mexico. This is the first report of antibodies to B. burgdorferi in Latin American veterinarians. Veterinarians and high-risk people should be alert to take precautionary measures to prevent tick-borne diseases.

RESUMO

Multiresistance among microorganisms to common antimicrobials has become one of the most significant concerns in modern medicine. Nanomaterials are a new alternative to successfully treat the multiresistant microorganisms. Nanostructured materials are used in many fields, including biological sciences and medicine. Recently, it was demonstrated that the bactericidal activity of zero-valent bismuth colloidal nanoparticles inhibited the growth of Streptococcus mutans; however the antimycotic potential of bismuth nanostructured derivatives has not yet been studied. The main objective of this investigation was to analyze the fungicidal activity of bismuth oxide nanoparticles against Candida albicans, and their antibiofilm capabilities. Our results showed that aqueous colloidal bismuth oxide nanoparticles displayed antimicrobial activity against C. albicans growth (reducing colony size by 85%) and a complete inhibition of biofilm formation. These results are better than those obtained with chlorhexidine, nystatin, and terbinafine, the most effective oral antiseptic and commercial antifungal agents. In this work, we also compared the antimycotic activities of bulk bismuth oxide and bismuth nitrate, the precursor metallic salt. These results suggest that bismuth oxide colloidal nanoparticles could be a very interesting candidate as a fungicidal agent to be incorporated into an oral antiseptic. Additionally, we determined the minimum inhibitory concentration for the synthesized aqueous colloidal Bi2O3 nanoparticles.

Assuntos

RESUMO

BACKGROUND AND METHODS: Despite continuous efforts, the increasing prevalence of resistance among pathogenic bacteria to common antibiotics has become one of the most significant concerns in modern medicine. Nanostructured materials are used in many fields, including biological sciences and medicine. While some bismuth derivatives has been used in medicine to treat vomiting, nausea, diarrhea, and stomach pain, the biocidal activity of zerovalent bismuth nanoparticles has not yet been studied. The objective of this investigation was to analyze the antimicrobial activity of bismuth nanoparticles against oral bacteria and their antibiofilm capabilities. RESULTS: Our results showed that stable colloidal bismuth nanoparticles had 69% antimicrobial activity against Streptococcus mutans growth and achieved complete inhibition of biofilm formation. These results are similar to those obtained with chlorhexidine, the most commonly used oral antiseptic agent. The minimal inhibitory concentration of bismuth nanoparticles that interfered with S. mutans growth was 0.5 mM. CONCLUSION: These results suggest that zerovalent bismuth nanoparticles could be an interesting antimicrobial agent to be incorporated into an oral antiseptic preparation.

Assuntos

RESUMO

Periodontal disease is the major cause of tooth loss in adults. Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans are considered key pathogens in periodontitis. The treatment consists of oral hygiene education, instrumentation for removal of calculus (scaling), chemotherapy and periodontal surgery. Several agents are commercially available; these chemicals can alter oral microbiota and have undesirable side-effects such as vomiting, diarrhea and tooth staining. Hence, the search for alternative products continues and natural phytochemicals isolated from plants used as traditional medicine and the use of biomaterials are considered good alternatives. Chitosan and pullulan are polymers that have been proposed due to their favorable properties such as biocompatibility, biodegradability, and adhesion ability. They can be used as local delivery systems of active principles of plant extracts. Thymus vulgaris, Matricaria chamomilla, Croton lechleri, Calendula officinalis L. and Juliana adstringens Schl. are known to have medicinal activity, and they are used in Mexican traditional medicine. Their extracts were tested in vitro for antimicrobial activity against P. gingivalis and A. actinomycetemcomitans, using agar diffusion and microdilution methods. The antimicrobial activity of films from biopolymers with plant extracts was evaluated by measuring the zones of inhibition against the tested organisms. The aim of this study was to develop bioadhesive films from chitosan and pullulan with added plant extracts and determine the antimicrobial activity of films against periodontal pathogens.

Assuntos

RESUMO

Periodontal disease is the major cause of tooth loss in adults. Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans are considered key pathogens in periodontitis. The treatment consists of oral hygiene education, instrumentation for removal of calculus (scaling), chemotherapy and periodontal surgery. Several agents are commercially available; these chemicals can alter oral microbiota and have undesirable sideeffects such as vomiting, diarrhea and tooth staining. Hence, the search for alternative products continues and natural phytochemicals isolated from plants used as traditional medicine and the use of biomaterials are considered good alternatives. Chitosan and pullulan are polymers that have been proposed due to their favorable properties such as biocompatibility, biodegradability, and adhesion ability. They can be used as local delivery systems of active principles of plant extracts. Thymus vulgaris, Matricaria chamomilla, Croton lechleri, Calendula officinalis L. and Juliana adstringens Schl. are known to have medicinal activity, and they are used in Mexican traditional medicine. Their extracts were tested in vitro for antimicrobial activity against P. gingivalis and A. actinomycetemcomitans, using agar diffusion and microdilution methods. The antimicrobial activity of films from biopolymers with plant extracts was evaluated by measuring the zones of inhibition against the tested organisms. The aim of this study was to develop bioadhesive films from chitosan and pullulan with added plant extracts and determine the antimicrobial activity of films against periodontal pathogens.

La enfermedad periodontal es la principal causa de perdida de dientes en los adultos. Los agentes causales comunmente identificados con la enfermedad son Porphyromonas gingivalis y Aggregatibacter actinomycetemcomitans. El tratamiento de la enfermedad consiste en educacion sobre higiene oral, remocion de calculos por medio de instrumentacion (raspado y alisado de la raiz), la administracion de medicamentos y cirugia. Hay multiples agentes quimicos disponibles comercialmente; estos pueden alterar la microflora oral y tener efectos secundarios indeseables como vomito, diarrea y pigmentacion dental. Por lo tanto, los productos naturales como los fitoquimicos aislados de plantas que son usadas como medicinas tradicionales y los biomateriales, son considerados buenas alternativas. El quitosan y el pululan son polimeros que han sido propuestos debido a sus propiedades de biocompatibilidad, biodegradabilidad, habilidad de adhesion y que pueden ser usados como sistemas de liberacion de los principios activos de extractos de plantas. Los extractos de Thymus vulgaris, Matricaria chamomilla, Croton lechleri, Calendula officinalis L. y Juliana adstringens Schl. son conocidos por tener actividad medicinal y se usan en la medicina tradicional Mexicana. La actividad antimicrobiana de sus extractos fue probada in vitro contra P. gingivalis y A. actinomycetemcomitans usando los metodos de difusion en agar y de microdilucion. La actividad antimicrobiana de peliculas a base de biopolimeros con extractos de plantas fue evaluada midiendo las zonas de inhibicion de crecimiento de los organismos probados. El proposito de este estudio fue desarrollar peliculas bioadhesivas de quitosan y pululan adicionadas con extractos de plantas y evaluar su actividad antimicrobiana contra periodontopatogenos.

Assuntos