RESUMO

In this work, an iron-rich residue, which is widely obtained as a by-product in the iron mining industry, and macauba endocarp, waste from the extraction of vegetable oil for the production of biofuels, were used in the preparation of different composites based on iron and carbon. The composites were obtained by manual grinding of the calcined iron residue and activated carbon prepared by the macauba endocarp followed by thermal treatment under nitrogen atmosphere. The effect of the thermal treatment was analyzed by Mössbauer spectroscopy and X-ray diffraction and showed that the increase in the treatment temperature promoted the formation of different reduced iron phases in the final composite, such as Fe3O4, FeO, and Fe0. These composites were used in a combined adsorption/oxidation process through photocatalysis to remove up to 93% of amoxicillin from aqueous phase. The formation of possible reaction intermediates was monitored by electrospray ionization mass spectrometry (ESI-MS) and a mechanism of amoxicillin degradation was proposed. Afterward, the Fe/C composites were conducted to evaluate the impact of several parameters on phosphate adsorption processes and showed a maximum adsorption capacity of 40.3 mg g-1. The adsorption capacity obtained for all the materials were greater than those found in the literature.

Assuntos

RESUMO

Aim: Evaluation of the biocompatibility and radiosensitizer potential of citrate-coated cobalt (cit-CF) and nickel (cit-NF) ferrite nanoparticles (NPs). Materials & methods: Normal fibroblast and breast cancer cells were treated with different concentrations of citrate-coated ferrite NPs (cit-NPs) and irradiated with a cobalt-60 source at doses of 1 and 3 Gy. After 24 h, cell metabolism, morphology alterations and nanoparticle uptake were evaluated. Results: Cit-CF and cit-NF NPs showed no toxicity to normal cells up to 250 and 100 µg.ml-1, respectively. Combination of cit-NP and ionizing radiation resulted in up to fivefold increase in the radiation therapeutic efficacy against breast cancer cells. Conclusion: Cit-CF and cit-NF NPs are suitable candidates for application as breast cancer cell radiosensitizers.

Assuntos

RESUMO

Aim: The field of nanotechnology promotes the development of innovative and more effective cancer therapies. This work is aimed to develop a hybrid system that combines the capacity of boron nitride nanotubes (BNNTs) to be internalized by tumor cells and the ability of nickel ferrite nanoparticles to efficiently release heat by induced AC magnetic heating. Materials & methods: The systems studied were characterized by using x-ray diffractometry, transmission electron microscopy, vibrating sample magnetometry and Mössbauer spectroscopy. Results: The ferrite nanoparticles attached to BNNT were able to achieve the required temperatures for magnetohyperthermia therapies. After cellular internalization, AC induced magnetic heating of BNNT@NiFe2O4 can kill almost 80% of Hela cells lineage in a single cycle. Conclusion: This system can be a highly efficient magnetohyperthermia agent in cancer therapy.

Assuntos

RESUMO

In this work, iron oxide in the red mud (RM) waste was restructured to produce mesopores with surface [FeO x (OH) y ] sites for the efficient complexation/adsorption of ß-lactam antibiotics. Red mud composed mainly by hematite was restructured by an acid/base process followed by a thermal treatment at 150-450 °C (MRM150, MRM200, MRM300, and MRM450) and fully characterized by Mössbauer, XRD, FTIR, BET, SEM, CHN, and thermogravimetric analyses. The characterization data showed a highly dispersed Fe3+ oxyhydroxy phase, which was thermally dehydrated to a mesoporous α-Fe2O3 with surface areas in the range of 141-206 m2 g-1. These materials showed high efficiencies (21-29 mg g-1) for the adsorption of ß-lactam antibiotics, amoxicillin, cephalexin, and ceftriaxone, and the data was better fitted by the Langmuir model isotherm (R 2 = 0.9993) with monolayer adsorption capacity of ca. 39 mg g-1 for amoxicillin. Experiments such as competitive adsorption in the presence of phosphate and H2O2 decomposition suggested that the ß-lactamic antibiotics might be interacting with surface [FeO x (OH) y ] species by a complexation process. Moreover, the OH/Fe ratio, BET surface area and porosity indicated that this complexation is occurring especially on [FeO x (OH) y ]surf sites contained in the mesopore space.

Assuntos

RESUMO

In the present work, we study the role of different components in the formation of more stable iron oxide magnetic nanoparticles (MNPs): ß-cyclodextrin (BCD), 2-hydroxypropyl-ß-cyclodextrin (HP) and citrate anion. MNPs formulations were characterized by FTIR, particles size measurements, zeta potential based on dynamic light scattering principle technique, X-ray powder pattern diffraction, XPS spectroscopy, transmission electron microscopy and thermogravimetric analysis. The results showed that cyclodextrins and citrate plays a key role in order to obtain a lower size of coated MNPs and proved to be an efficient strategy to obtain a more stable colloidal dispersion, avoiding the nanoparticles oxidation, enhancing the irinotecan incorporation and release. Furthermore, citrate-coated BCD-MNPs showed the same cytotoxicity of the free IRI.

RESUMO

Fe2O3-SiO2 composites were prepared by impregnation (sample FeIMP) or doping (sample FeDOP) in the structure of porous silica. The dye removal capacity of the materials was investigated through adsorption and oxidation studies of methylene blue and rhodamine B. N2 adsorption/desorption measurements on FeIMP and FeDOP resulted in specific areas of 27 and 235 m2 g-1, respectively. Mössbauer spectroscopy and XRD data detected hematite and maghemite as the iron phases in the samples FeIMP and FeDOP, respectively. Adsorption isotherms and kinetic studies of the dyes were better fitted in DKR model for FeDOP, where the process follows a pseudo-second order with the interparticle diffusion step being the rate-limiting step. On the other hand, FeIMP has better fit in the Langmuir model. Photocatalytic activity was observed in FeDOP under UV irradiation by the presence of reaction-hydroxylated intermediates for MB (m/z = 301) and RhB (m/z = 459). However, the photocatalytic activity was strongly influenced by the adsorption affinity between dye/catalyst. Photogenerated holes are the species responsible for the dye degradation when the adsorption is too strong, while hydroxyl radical action will be favored when the adsorption is not vigorous as detected by ESI-MS. Graphical Abstract Action of photogenerated holes and free electrons into the photocatalytically mechanism of methylene blue degradation over a semiconductor.

Assuntos

RESUMO

In this work, [FeOx(OH)y]/Al2O3 composites with different Fe oxyhydroxy contents, i.e. 10, 20 and 50wt% treated at 150, 200, 300 and 450°C were investigated as adsorbents of ß-lactamic antibiotics, i.e. cephalexin, ceftriaxone and especially amoxicillin, from aqueous solutions. The obtained results showed that the nature of the surface Fe(3+) species play a fundamental role on the adsorption process. The most efficient adsorption was obtained for the sample 150Fe50A (50% [FeOx(OH)y] supported in Al2O3 treated at 150°C) whereas the thermal treatment at higher temperatures caused a strong decrease on the adsorption capacity. Mössbauer, XRD, FTIR, Raman, TG-MS, SEM, CHN and BET of the composite 150Fe50A suggested an approximate composition of FeO0.65(OH)1.7 whereas at 450°C strong dehydroxylation process takes place to form FeO1.4(OH)0.21. These results combined with competitive adsorption using amoxicillin mixed with phosphate or H2O2 suggest that the antibiotic molecules adsorb by complexation on surface sites likely based on FeOx(OH)y by the replacement of the labile OH ligands.

Assuntos

RESUMO

Amphiphilic magnetic composites were produced based on chrysotile mineral and carbon structures by chemical vapor deposition at different temperatures (600-900 °C) and cobalt as catalyst. The materials were characterized by elemental analysis, X-ray diffraction, vibrating sample magnetometry, adsorption and desorption of N2, Raman spectroscopy, scanning electronic microscopy, and thermal analysis showed an effective growth of carbon structures in all temperatures. It was observed that at 800 and 900 °C, a large amount of carbon structures are formed with fewer defects than at 600 and 700 °C, what contributes to their stability. In addition, the materials present magnetic phases that are important for their application as catalysts and adsorbents. The materials have shown to be very active to remove the oil dispersed in a real sample of emulsified wastewater from biodiesel production and to remove methylene blue by adsorption and oxidation via heterogeneous Fenton mechanism.

Assuntos

RESUMO

Recent research on novel cost-effective adsorbent materials suggests potential use of industrial wastes for effluent treatment, with the added benefit of reuse of the wastes. Waste steel materials, including blast oxygen furnace sludge (BOFS), blast furnace sludge (BFS), and blast furnace dust (BFD), were investigated as low-cost adsorbents for removal of an oil emulsion and RR195 dye. The residues were characterized by X-ray diffraction, Brunauer-Emmett-Teller area, volume and distribution of pore diameters, Mössbauer spectroscopy, X-ray fluorescence, granulometry, scanning electron microscopy/energy dispersive spectroscopy, and pHpzc. Adsorption kinetics data were obtained by UV-vis spectrophotometry at the maximum absorption wavelength of the dye solution and crude oil emulsion. The use of waste as an adsorbent was more efficient for treatment of the oil emulsion than the dye solution. BOFS had higher total organic carbon (TOC) removal efficiency than the other waste materials. For the RR195 dye, good color removal was observed for all adsorbents, >90 % within 24 h. TOC removal was poor, <10 % for BFD and BFS and a maximum of 37 % for BOFS. For the oil emulsion, 97 % TOC removal was obtained by adsorption onto BOFS and 87 % onto BFS.

Assuntos

RESUMO

In this work, chrysotile was used as support to grow carbon nanotubes and nanofibers to produce fibrous amphiphilic magnetic nanostructured composites. Iron impregnated on the chrysotile surface at 1, 5 and 15 wt% was used as catalyst to grow carbon nanostructures by CVD (chemical vapor deposition) with ethanol at 800°C. Raman, TG/DTA, Mössbauer, XRD, BET, SEM, TEM, elemental analyses and contact angle measurements suggested the formation of a complex amphiphilic material containing up to 21% of nanostructured hydrophobic carbon supported on hydrophilic Mg silicate fibers with magnetic Fe cores protected by carbon coating. Adsorption tests for the hormone ethynilestradiol (EE), a hazardous water contaminant, showed remarkable adsorption capacities even compared to high surface area activated carbon and multiwall carbon nanotubes. These results are discussed in terms of the hydrophobic surface of the carbon nanotubes and nanofibers completely exposed and accessible for the adsorption of the EE molecules combined with the hydrophilic Mg silicate surface which allows good dispersion in water. The composites are magnetic and after adsorption the dispersed particles can be removed by a simple magnetic process. Moreover, the fibrous composites can be conformed as threads, screens and pellets to produce different filtering media.

Assuntos