RESUMO
Abstract Life cycle assessment was carried out for a conventional wooden furniture set produced in Mardan division of the Khyber Pakhtunkhwa province of Pakistan during 2018-19. Primary data regarding inputs and outputs were collected through questionnaire surveys from 100 conventional wooden furniture set manufacturers, 50 in district Mardan and 50 in district Swabi. In the present study, cradle-to-gate life cycle assessment approach was applied for a functional unit of one conventional wooden furniture set. Production weighted average data were modelled in the environmental impacts modelling software i.e., SimaPro v.8.5. The results showed that textile used in sofa set, wood preservative for polishing and preventing insects attack and petrol used in generator had the highest contribution to all the environmental impact categories evaluated. Total cumulative energy demand for wooden furniture set manufactured was 30,005 MJ with most of the energy acquired from non-renewable fossil fuel resources.
Resumo A abordagem de avaliação do ciclo de vida foi realizada para um conjunto de móveis de madeira convencional produzido na divisão Mardan da província de Khyber Pakhtunkhwa do Paquistão durante 2018-19. Os dados primários sobre entradas e saídas foram coletados por meio de pesquisas por questionário de 100 fabricantes de conjuntos de móveis de madeira convencionais, 50 no distrito de Mardan e 50 no distrito de Swabi. No presente estudo, a abordagem de avaliação do ciclo de vida do berço ao portão foi aplicada para uma unidade funcional de um conjunto de móveis de madeira convencional. Os dados da média ponderada da produção foram modelados no software de modelagem de impactos ambientais, isto é, SimaPro v.8.5. Os resultados mostraram que os têxteis usados no conjunto de sofás, o preservativo de madeira para polir e prevenir o ataque de insetos e a gasolina usada no gerador tiveram a maior contribuição em todas as categorias de impacto ambiental avaliadas. A demanda total acumulada de energia para o conjunto de móveis de madeira fabricado foi de 30.005 MJ, com a maior parte da energia adquirida de recursos de combustíveis fósseis não renováveis.
RESUMO
Abstract Life cycle assessment was carried out for a conventional wooden furniture set produced in Mardan division of the Khyber Pakhtunkhwa province of Pakistan during 2018-19. Primary data regarding inputs and outputs were collected through questionnaire surveys from 100 conventional wooden furniture set manufacturers, 50 in district Mardan and 50 in district Swabi. In the present study, cradle-to-gate life cycle assessment approach was applied for a functional unit of one conventional wooden furniture set. Production weighted average data were modelled in the environmental impacts modelling software i.e., SimaPro v.8.5. The results showed that textile used in sofa set, wood preservative for polishing and preventing insects attack and petrol used in generator had the highest contribution to all the environmental impact categories evaluated. Total cumulative energy demand for wooden furniture set manufactured was 30,005 MJ with most of the energy acquired from non-renewable fossil fuel resources.
Resumo A abordagem de avaliação do ciclo de vida foi realizada para um conjunto de móveis de madeira convencional produzido na divisão Mardan da província de Khyber Pakhtunkhwa do Paquistão durante 2018-19. Os dados primários sobre entradas e saídas foram coletados por meio de pesquisas por questionário de 100 fabricantes de conjuntos de móveis de madeira convencionais, 50 no distrito de Mardan e 50 no distrito de Swabi. No presente estudo, a abordagem de avaliação do ciclo de vida do berço ao portão foi aplicada para uma unidade funcional de um conjunto de móveis de madeira convencional. Os dados da média ponderada da produção foram modelados no software de modelagem de impactos ambientais, isto é, SimaPro v.8.5. Os resultados mostraram que os têxteis usados no conjunto de sofás, o preservativo de madeira para polir e prevenir o ataque de insetos e a gasolina usada no gerador tiveram a maior contribuição em todas as categorias de impacto ambiental avaliadas. A demanda total acumulada de energia para o conjunto de móveis de madeira fabricado foi de 30.005 MJ, com a maior parte da energia adquirida de recursos de combustíveis fósseis não renováveis.
Assuntos
Meio Ambiente , Decoração de Interiores e Mobiliário , PaquistãoRESUMO
Life cycle assessment was carried out for a conventional wooden furniture set produced in Mardan division of the Khyber Pakhtunkhwa province of Pakistan during 2018-19. Primary data regarding inputs and outputs were collected through questionnaire surveys from 100 conventional wooden furniture set manufacturers, 50 in district Mardan and 50 in district Swabi. In the present study, cradle-to-gate life cycle assessment approach was applied for a functional unit of one conventional wooden furniture set. Production weighted average data were modelled in the environmental impacts modelling software i.e., SimaPro v.8.5. The results showed that textile used in sofa set, wood preservative for polishing and preventing insects attack and petrol used in generator had the highest contribution to all the environmental impact categories evaluated. Total cumulative energy demand for wooden furniture set manufactured was 30,005 MJ with most of the energy acquired from non-renewable fossil fuel resources.
Assuntos
Meio Ambiente , Decoração de Interiores e Mobiliário , PaquistãoRESUMO
BACKGROUND: Several noninvasive predictive models were developed to substitute liver biopsy for fibrosis assessment. AIM: To evaluate the diagnostic value of fibronectin which reflect extracellular matrix metabolism and standard liver functions tests which reflect alterations in hepatic functions. MATERIAL AND METHODS: Chronic hepatitis C (CHC) patients (n = 145) were evaluated using ROC curves and stepwise multivariate discriminant analysis (MDA) and was validated in 180 additional patients. Liver biochemical profile including transaminases, bilirubin, alkaline phosphatase, albumin, complete blood count were estimated. Fibronectin concentration was determined using monoclonal antibody and ELISA. RESULTS: A novel index named fibronectin discriminant score (FDS) based on fibronectin, APRI and albumin was developed. FDS produced areas under ROC curves (AUC) of 0.91 for significant fibrosis and 0.81 for advanced fibrosis. The FDS correctly classified 79% of the significant liver fibrosis patients (F2-F4) with 87% sensitivity and 75% specificity. The relative risk [odds ratio (OR)] of having significant liver fibrosis using the cut-off values determined by ROC curve analyses were 6.1 for fibronectin, 4.9 for APRI, and 4.2 for albumin. FDS predicted liver fibrosis with an OR of 16.8 for significant fibrosis and 8.6 for advanced fibrosis. The FDS had similar AUC and OR in the validation group to the estimation group without statistically significant difference. CONCLUSION: FDS predicted liver fibrosis with high degree of accuracy, potentially decreasing the number of liver biopsy required.