RESUMO
OBJECTIVES: This 24-month, double-blind, split-mouth randomized clinical trial aimed to compare the retention rates of a preheated thermoviscous composite resin (PHT) compared to a non-heated composite resin (NHT) in non-carious cervical lesions (NCCLs). METHODS: A total of 120 restorations were restored on NCCLs using a preheated (VisCalor bulk, Voco GmbH) and a non-heated (Admira Fusion, Voco GmbH) composite resins with 60 restorations per group. A universal adhesive in the selective enamel conditioning was applied. In the PHT group, composite was heated at 68 °C for using a bench heater. In the NHT group, no heating was employed. Both restorative materials were dispensed into caps and inserted into the NCCLs. The restorations were evaluated at baseline, 6, 12, 18, and after 24 months of clinical service using the FDI criteria. Statistical analysis was performed with Kaplan-Meier estimation analysis for retention/fracture rate and Chi-square test for the other FDI parameters (α=0.05). RESULTS: After 24 months 108 restorations were assessed. Seven restorations were lost (two for PHT group and five for NHT group), and the retention rates (95 % confidence interval [CI]) were 96.7 % (81.5-99.9) for PHT group and 90.8 % (81.1-96.0) for NHT group, with no statistical differences between them (p > 0.05). The hazard ratio (95 % CI) was 0.52 (0.27 to 1.01), with no significant difference within groups. In terms of all other FDI parameters that were assessed, all restorations were deemed clinically acceptable. CONCLUSIONS: Both composites showed high rates of retention rates after 24 months. CLINICAL SIGNIFICANCE: The clinical performance of the new preheated thermoviscous was found to be as good as the non-heated composite after 24-month of clinical evaluation in non-carious cervical lesions. REGISTRATION OF CLINICAL TRIALS: RBR-6d6gxxz.
Assuntos
Resinas Compostas , Restauração Dentária Permanente , Temperatura Alta , Colo do Dente , Humanos , Resinas Compostas/química , Resinas Compostas/uso terapêutico , Restauração Dentária Permanente/métodos , Feminino , Método Duplo-Cego , Masculino , Colo do Dente/patologia , Adulto , Pessoa de Meia-Idade , Materiais Dentários/química , Falha de Restauração Dentária , Adulto Jovem , Sensibilidade da Dentina , Cimentos de Resina/química , Seguimentos , Estimativa de Kaplan-Meier , Resultado do Tratamento , Propriedades de Superfície , Erosão Dentária/terapiaRESUMO
OBJECTIVE: Despite the availability of in-office bleaching gels with a 6% concentration of hydrogen peroxide (HP), these gels have not been evaluated in younger patients. They are commercially available with a tip, associated or not with a brush, where the tip with a brush spreads the gel over the entire surface to have a smaller thickness (thin layer) since the manufacturers indicate the application of a thin layer of gel. This randomized, split-mouth, double-blind clinical trial evaluated the efficacy of in-office bleaching with 6% HP in adolescents using different application tips, as well tooth sensitivity (TS) and aesthetic self-perception. METHODOLOGY: Sixty participants were randomized for 6% HP self-mixing bleaching gel tip design: without brush and with brush. In-office bleaching was performed in 3 sessions of 50 minutes. Color change was evaluated using a digital spectrophotometer (ΔE ab , ΔE 00 , and ΔWI D ) and color guide (ΔSGU), the absolute risk and intensity of TS with a visual analogue scale and aesthetic self-perception with the oral aesthetic scale (a=0.05). RESULTS: The groups achieved similar bleaching regardless of the application tip (p>0.05). However, only for ΔWI D , a significant mean difference (MD) was observed in the third week (MD 2.3; 95% CI 1.2 to 3.3; p < 0.001) and at one month (MD 1.6; 95% CI 0.6 to 2.6; p < 0.03) favoring the tip without brush. Regarding TS, 45% in the tip-without-brush group and 33% in the tip-with-brush group reported TS (odds ratio 0.61; 95% CI 0.29 to 1.28; p<0.02), with low TS intensity (MD 0.05; 95% CI -0.06 to 0.17; p>0.36). All patients reported improved aesthetic self-perception after bleaching (MD -1.3; 95% -1.8 to -0.9; p<0.001). CONCLUSIONS: Regardless of the tip used bleaching with 6% HP achieved a bleaching efficacy and improved the aesthetic self-perception. However, a lower risk of TS for application using the tip with brush was observed.
Assuntos
Sensibilidade da Dentina , Clareadores Dentários , Clareamento Dental , Humanos , Adolescente , Peróxido de Hidrogênio , Resultado do Tratamento , GéisRESUMO
OBJECTIVE: The aim of this double-blind, randomized clinical trial was to evaluate the 6- and 18-month clinical performances of a new universal adhesive applied in the "no-waiting" (NW) technique to non-carious cervical lesions (NCCLs) using two evaluation criteria. MATERIALS AND METHODS: One hundred and seventy-six restorations were assigned to four groups according to the adhesive system, adhesive strategy, and application mode: Prime&Bond Active (PB) applied using the etch-and-rinse (ER) and self-etch (SE) strategies with 20 s applications and Clearfil Universal Bond Quick (CQ) applied using the ER and SE strategies with the NW technique. The composite resin restorations were evaluated at baseline and after 6 and 18 months using the World Dental Federation (FDI) and US Public Health Service (USPHS) criteria. The Friedman repeated measures analysis of variance and Wilcoxon test were used for statistical analyses (α = 0.05). RESULTS: No significant differences were observed among any of the groups or criteria after 6 months (p > 0.05). After 18 months, 10 restorations were lost (p > 0.05) (2 with PB-ER [95.5%; 95%CI: 92-100%], 4 with PB-SE [90.9%; 95%CI: 82-98%], 0 with CQ-ER [100%; 95%CI: 92-100%], and 4 with CQ-SE [90.9%; 82-98%]). The restorations performed with the SE strategy showed more marginal discrepancies than those performed with the ER strategy, mainly when the FDI criteria were used (p < 0.05). Those that used the PB-SE showed fewer marginal discrepancies than those that used the CQ-SE (FDI; p < 0.05). A few restorations showed marginal discrepancies after the USPHS analysis (p > 0.05). CONCLUSIONS: The results when using the CQ-SE and -ER strategies with the NW technique were similar to those when using the PB-SE and -ER strategies in standard applications to non-carious cervical lesions after 6 and 18 months of clinical evaluation. CLINICAL RELEVANCE: After 6 and 18 months, the application of Clearfil Universal Bond Quick with the "no-waiting" technique showed similar clinical performance compared to the standard application of Prime & Bond Active applied using the standard application time (20 s). TRIAL REGISTRATION: ClinicalTrials.gov identifier RBR-5f9gps.
Assuntos
Cimentos Dentários , Adesivos Dentinários , Humanos , Adesivos Dentinários/química , Cimentos de Resina/química , Restauração Dentária Permanente/métodos , Método Duplo-Cego , Falha de Restauração Dentária , Resinas Compostas/uso terapêutico , Resinas Compostas/química , Adaptação Marginal DentáriaRESUMO
Abstract Despite the availability of in-office bleaching gels with a 6% concentration of hydrogen peroxide (HP), these gels have not been evaluated in younger patients. They are commercially available with a tip, associated or not with a brush, where the tip with a brush spreads the gel over the entire surface to have a smaller thickness (thin layer) since the manufacturers indicate the application of a thin layer of gel. Objective This randomized, split-mouth, double-blind clinical trial evaluated the efficacy of in-office bleaching with 6% HP in adolescents using different application tips, as well tooth sensitivity (TS) and aesthetic self-perception. Methodology Sixty participants were randomized for 6% HP self-mixing bleaching gel tip design: without brush and with brush. In-office bleaching was performed in 3 sessions of 50 minutes. Color change was evaluated using a digital spectrophotometer (ΔE ab , ΔE 00 , and ΔWI D ) and color guide (ΔSGU), the absolute risk and intensity of TS with a visual analogue scale and aesthetic self-perception with the oral aesthetic scale (a=0.05). Results The groups achieved similar bleaching regardless of the application tip (p>0.05). However, only for ΔWI D , a significant mean difference (MD) was observed in the third week (MD 2.3; 95% CI 1.2 to 3.3; p < 0.001) and at one month (MD 1.6; 95% CI 0.6 to 2.6; p < 0.03) favoring the tip without brush. Regarding TS, 45% in the tip-without-brush group and 33% in the tip-with-brush group reported TS (odds ratio 0.61; 95% CI 0.29 to 1.28; p<0.02), with low TS intensity (MD 0.05; 95% CI -0.06 to 0.17; p>0.36). All patients reported improved aesthetic self-perception after bleaching (MD -1.3; 95% -1.8 to -0.9; p<0.001). Conclusions Regardless of the tip used bleaching with 6% HP achieved a bleaching efficacy and improved the aesthetic self-perception. However, a lower risk of TS for application using the tip with brush was observed.
RESUMO
Background: This study aimed to evaluate the bond strength and internal adaptation of customized glass fiber posts using Bulk Fill flowable composite resins (BF) and conventional composite resin. Material and Methods: Fifty bovine teeth were randomly divided (n=10) according to the following groups: G1 (control): glass fiber posts were adapted to the root canal and luted with Rely-X ARC cement (3M® ESPE); G2: fiber posts smaller than the root canal diameter were customized using Filtek™ Z350 XT (3M® ESPE) conventional composite resin, and luted similarly to Group 1. G3: posts were customized with Tetric N-Ceram Bulk Fill composite resin (Ivoclar Vivadent AG), G4: posts were customized with Filtek™ Bulk Fill Flow (3M® ESPE), and G5: posts were customized with SureFil SDRTM flow (DENTSPLY), respectively. The specimens were submitted to push-out testing and internal adaptation evaluation using optical microscopy. Push-out (MPa) and internal adaptation (%) data were subjected to ANOVA and Tukey's post-hoc tests (p = 5%). Results: No statistically significant differences were found in both evaluations (p<0.05). Conclusions: Customized glass fiber posts using different bulk fill flowable composites did not affect the post bond-strength and internal adaptation, presenting similar results to customized glass fiber posts using conventional composite or posts with no previous customization. Key words:Dental pulp, composite resins, fiber posts, glass fiber post.
RESUMO
INTRODUCTION: Critical failures in ceramic materials can be caused by the processing mode, which includes all steps taken in the manufacture of a ceramic part, from molding to firing. PURPOSE: To evaluate the effect of extended firing on bond strength in densely sintered ceramics of the zirconium reinforced lithium silicate, lithium disilicate, and feldspathic ceramic. MATERIALS AND METHODS: Three types of ceramics were evaluated: zirconium reinforced lithium silicate, lithium disilicate, feldspathic ceramic. A total of 6 ceramic blocks, two for each material were used in the study. Each block was cut into four square sections. A total of 24 ceramic surfaces were randomly distributed into 6 groups (n = 4 surfaces per group) divided according to the variables: heat treatment: conventional firing or extended firing; test time: immediate (24 hours after cementation) or longevity (after 1000 cycles of thermocycling). The bond strength tests were performed in a semi-universal test machine for microshear bond strength. For data analysis, the Shapiro-Wilk test was performed to evaluate the normality between the groups measured, and regarding homoscedasticity (homogeneity of variances) by the Bartlett test. The comparisons between the groups were made using the nonparametric Kruskal-Wallis test. RESULTS: There was no statistically significant difference of the resistance values in relation to the thermal treatment methods (conventional firing and extended firing) in any ceramic group (p <0.05). Among the times (immediate and long), there was a statistically significant difference (p <0.05), with higher resistance values for immediate time. CONCLUSION: Extended firing did not influence the micro-shear bond strength of zirconium reinforced lithium silicate, lithium disilicate, feldspathic ceramic.
RESUMO
BACKGROUND: This study aimed to evaluate the impact of home bleaching with 10% carbamide peroxide on the quality of life and aesthetic perception of patients. MATERIAL AND METHODS: A total of 107 patients between 18 and 38 years of age with good oral and general health and at least one anterior tooth in color A2 or darker were selected. Patients who previously underwent any type of bleaching procedures were excluded. All patients received a home bleaching treatment with 10% carbamide peroxide. Before beginning the bleaching treatment, the selected patients responded a form with the Oral Health Impact Profile short form (OHIP-14) and Oral Aesthetic Subjective Impact Scale (OASIS) questionnaire. One month after the bleaching treatment, the patients answered the same questionnaires again. The mean ΔE after bleaching was obtained for the canines and lateral and central incisors. The OHIP-14 and OASIS data were measured for the total sample before and after bleaching using the Wilcoxon signed-rank test with a 5% significance level. RESULTS: The effectiveness of whitening by significant color variation was observed in all groups of teeth with less variation in ΔE for central incisors. Comparing before and after bleaching, there was no significant difference in impact for any of the seven domains and total OHIP-14 scores, although a decrease was observed in the discomfort and psychological disability domains. As for the self-perception of dental aesthetics, measured by the OASIS, there was also no significant difference for all the items evaluated; however, it was possible to observe an increase in "concern with dental appearance" after bleaching. CONCLUSIONS: Home bleaching with 10% carbamide peroxide did not have a significant impact on patients' quality of life and aesthetic perception, although there was a decrease in the domain of psychological discomfort and an increase in concerns about dental appearance. Key words:Tooth Bleaching, quality of life, self-perception, dental aesthetics.
RESUMO
BACKGROUND: Perception is defined as the ability to distinguish through the senses. All perception is dependent on factors such as personality, previously lived experiences and cultural elements. When planning an aesthetic treatment, consider the way the patients perceive the changes and outcomes is essential for reaching their expectations. The objective of this study was to assess if there was predominance of a personality trait of patient undergoing dental bleaching and if this treatment could promote changes in this traits, in the psychosocial impact and quality of life of these individuals. METHODS: The assessment of personality characteristics, quality of life, psychosocial and self-perception was a cross-sectional observational study and it was carried out by applying questionnaires to 55 patients that were submitted to a clinical phase. The psychometric instruments used were NEO FFI-R (personality), PIDAQ (psychosocial effect) and WHOQOL-BREF (quality of life). Each test domain was prior and after bleaching by Wilcoxon Signed Rank test (α = 0.05). The internal consistencies of each scale were evaluated by Cronbach's alpha. RESULTS: No statistical significant differences among personality traits means were observed among participants but there was predominance of two predominant personality traits in this study: conscientiousness (45.5%) and extraversion (34.5%). In four test domains of the PIDAQ, significant differences were observed before and after dental bleaching. The overall perception of the PIDAQ was also statistically significant demonstrating an improvement. There were no differences on overall or specific domains scores of the WHOQOL before and after treatment. CONCLUSIONS: Subjects who underwent dental treatment improved their self-confidence and reduced concerns about dental aesthetics, social and personality impact of dental alterations. TRIAL REGISTRATION: This study was conducted in parallel to a clinical investigation that aimed to evaluate tooth sensitivity related to dental bleaching technique and registered in REBEC clinical registry under protocol RBR-6pt2n3 in 13 November 2013.
Assuntos
Estética Dentária , Qualidade de Vida , Estudos Transversais , Humanos , Personalidade , Inquéritos e QuestionáriosRESUMO
OBJECTIVE: To compare the effectiveness of the pretreatment with sandblasting and deproteinization with NaOCl on bond strength (SBS), in situ conversion degree (CD) of brackets in fluorotic enamel, and enamel etching pattern. METHODS: A total of 90 non-carious maxillary premolars were used. The teeth were then assigned to six experimental groups according to: enamel surface (sound and fluorotic enamel); surface treatment (Regular etch with 37% phosphoric acid [RE]; 5.2% sodium hypochlorite + phosphoric acid [NaOCl + RE]; sandblasting + phosphoric acid [sandblasting + RE]). After storage in distilled water (37°C/24h), the specimens were tested at 1 mm/min until failure (SBS). Enamel-resin cement interfaces were evaluated for CD using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a scanning electron microscope. Data from SBS and in situ CD values were analyzed using ANOVA two-away and Tukey test (α=0.05). The enamel etching pattern was evaluated only qualitatively. RESULTS: For sound enamel, RE showed the highest SBS values, when compared to NaOCl + RE and Sandblasting + RE groups (p< 0.01). Regarding CD, only NaOCl + RE significantly compromised the mean DC, in comparison with other groups (p= 0.002). For fluorotic enamel, the Sandblasting + RE group significantly increased the mean SBS values, in comparison with RE group (p= 0.01) and no significant change was observed for CD (p> 0.52). CONCLUSIONS: The application of NaOCl or sandblasting associated to phosphoric acid improved the SBS of the brackets in fluorotic enamel without compromising the CD of the resin cement, with improving of enamel interprismatic conditioning.
Assuntos
Colagem Dentária , Braquetes Ortodônticos , Condicionamento Ácido do Dente , Cimentos Dentários , Esmalte Dentário , Teste de Materiais , Ácidos Fosfóricos , Cimentos de Resina , Resistência ao Cisalhamento , Propriedades de SuperfícieRESUMO
ABSTRACT Objective: To compare the effectiveness of the pretreatment with sandblasting and deproteinization with NaOCl on bond strength (SBS), in situ conversion degree (CD) of brackets in fluorotic enamel, and enamel etching pattern. Methods: A total of 90 non-carious maxillary premolars were used. The teeth were then assigned to six experimental groups according to: enamel surface (sound and fluorotic enamel); surface treatment (Regular etch with 37% phosphoric acid [RE]; 5.2% sodium hypochlorite + phosphoric acid [NaOCl + RE]; sandblasting + phosphoric acid [sandblasting + RE]). After storage in distilled water (37°C/24h), the specimens were tested at 1 mm/min until failure (SBS). Enamel-resin cement interfaces were evaluated for CD using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a scanning electron microscope. Data from SBS and in situ CD values were analyzed using ANOVA two-away and Tukey test (α=0.05). The enamel etching pattern was evaluated only qualitatively. Results: For sound enamel, RE showed the highest SBS values, when compared to NaOCl + RE and Sandblasting + RE groups (p< 0.01). Regarding CD, only NaOCl + RE significantly compromised the mean DC, in comparison with other groups (p= 0.002). For fluorotic enamel, the Sandblasting + RE group significantly increased the mean SBS values, in comparison with RE group (p= 0.01) and no significant change was observed for CD (p> 0.52). Conclusions: The application of NaOCl or sandblasting associated to phosphoric acid improved the SBS of the brackets in fluorotic enamel without compromising the CD of the resin cement, with improving of enamel interprismatic conditioning.
RESUMO Objetivo: Comparar a efetividade do pré-tratamento com jateamento e desproteinização com NaOCl na resistência de união (SBS), grau de conversão in situ (GC) dos braquetes metálicos ao esmalte fluorótico e o padrão de condicionamento do esmalte. Métodos: Foi utilizado um total de 90 pré-molares superiores livres de cárie. Os dentes foram divididos em seis grupos experimentais, de acordo com: superfície do esmalte (Esmalte Sadio e Fluorótico); tratamento de superfície (Condicionamento com ácido fosfórico a 37% [ER]; Hipoclorito de sódio a 5,2% + ácido fosfórico [NaOCl + ER]; e jateamento + ácido fosfórico [Jateamento + ER]). Após armazenamento em água destilada (37oC/24 h), os espécimes foram testados a 1 mm/min até a falha (SBS). As interfaces esmalte-cimento foram avaliadas para GC usando espectroscopia micro-Raman. O padrão do condicionamento do esmalte foi avaliado sob microscopia eletrônica de varredura. Os dados da SBS e GC foram analisados utilizando ANOVA dois fatores e teste de Tukey (α= 0,05). O padrão de condicionamento do esmalte foi avaliado apenas qualitativamente. Resultados: Para o esmalte sadio, o ER apresentou os maiores valores de SBS, quando comparado aos grupos NaOCl + ER e Jateamento + ER (p< 0,01). Em relação ao GC, apenas a média do grupo NaOCl + ER foi comprometida significativamente em comparação aos outros grupos (p= 0,002). Para o esmalte fluorótico, Jateamento + ER aumentou significativamente a média dos valores de SBS, em comparação com o grupo ER (p= 0,01) e nenhuma mudança significativa foi observada no GC (p> 0,52). Conclusões: A aplicação de NaOCl ou jateamento associado ao ácido fosfórico melhorou a SBS dos braquetes no esmalte fluorótico sem comprometer o GC do cimento resinoso, com a melhoria do condicionamento interprismático do esmalte.