RESUMO
The present work reports the antibacterial activity againstPseudomonasaeruginosaof a nanocomposite made of zinc oxide nanoparticles dispersed in a poly(acrylamide-co-hydroxyethylmethacrylate) matrix (PAAm-Hema-ZnONPs). Thein situsynthesis of ZnONPs inside of the PAAm-Hema crosslinked network is described. Moreover, the physicochemical properties of the PAAm-Hema-ZnONPs nanocomposite are analyzed. The results confirm that the PAAm-Hema hydrogel provides an excellent scaffold to generate ZnONPs. The presence of ZnONPs inside the hydrogel was confirmed by UV-visible (band at 320 nm), by Infrared spectroscopy (peak at 470 cm-1), SEM, and TEM images. The presence of NPs in PAAm-Hema diminish the swelling percentage by 70%, and the Young modulus by 33.7%, compared with pristine hydrogel. The 75% of ZnONPs are released from the nanocomposite after 48 h of spontaneous diffusion, allowing the use of the nanocomposite as an antibacterial agent.In vitro, the agar diffusion test presents an inhibition halo againstP. aeruginosabacteria 50% higher than the unloaded hydrogel. Also, the PAAm-Hema-ZnONPs live/dead test shows 54% of dead cells more than the hydrogel. These results suggest that the easy, one-step way generated composites can be used in biomedical applications as antimicrobial agents.
Assuntos
Nanocompostos , Nanopartículas , Óxido de Zinco , Óxidos , Nanocompostos/química , Óxido de Zinco/farmacologia , Óxido de Zinco/química , Antibacterianos/química , Hidrogéis/farmacologia , Hidrogéis/química , AcrilamidasRESUMO
Biofilm Formation is a survival strategy for microorganisms to adapt to their environment. Microbial cells in biofilm become tolerant and resistant to antibiotics and immune responses, increasing the difficulties for the clinical treatment of microbial infections. The surface chemistry and the micro/nano-topography of solid interfaces play a major role in mediating microorganism activity and adhesion. The effect of the surface chemical composition and topography on the adhesion and viability of Pseudomonas aeruginosa was studied. Polymeric (polyethylene terephthalate) surfaces were covered with a conducting polymer (polyaniline, PANI) film by in-situ polymerization and microstructured by Direct Laser Interference Patterning (DLIP). The viability of Pseudomonas aeruginosa on the different surfaces was investigated. The physicochemical properties of the surfaces were characterized by water contact angle measurements, scanning electron microscopy and atomic force microscopy. Bacterial biofilms were imaged by atomic force and scanning electron microscopies. The bacterial viability decreased on PANI compared with the substrate (polyethylene terephthalate) and it decreased even more upon micro-structuring the PANI films. In addition, the biofilm reduction could be improved using polymers with different chemical composition and/or the same polymer with different topographies. Both methods presented diminish the bacterial attachment and biofilm formation. These findings present a high impact related to materials for biomedical engineer applications regarding medical devices, as prostheses or catheters.
Assuntos
Compostos de Anilina/química , Biofilmes , Pseudomonas aeruginosa/fisiologia , Aderência Bacteriana , Materiais Biocompatíveis/química , Catéteres , Farmacorresistência Bacteriana , Equipamentos e Provisões , Violeta Genciana/química , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Microscopia de Fluorescência , Polietilenotereftalatos/química , Propriedades de SuperfícieRESUMO
A direct study of the shape, size and connectivity of nonordered pores in carbon materials is particularly challenging. A new method that allows direct three-dimensional (3D) investigations of mesopores in monolithic carbon materials and quantitative characterization of their physical properties (surface area and pore size distribution) is reported. Focused ion beam (FIB) nanotomography technique is performed by combination of focused ion beam and scanning electron microscope. Porous monolithic carbon is produced by carbonization of a resorcinol-formaldehyde gel in the presence of a cationic polyelectrolyte as a pore stabilizer.
RESUMO
Macroporous hydrogels irreversibly absorb solid nanoparticles from aqueous dispersions. A nanocomposite is made using a macroporous thermosensitive hydrogel (poly(N-isopropylacrylamide-co-(2-acrylamido-2-methyl propane sulfonic acid)) (poly(NIPAm-co-AMPS)) and conductive polymer (polyaniline, PANI) nanoparticles (PANI NPs). Macroporous gels of poly(NIPAm-co-AMPS) were made by a cryogelation technique. NPs of PANI were produced by precipitation polymerization. It is found that PANI NPs are easily absorbed into the macroporous hydrogels while conventional non-porous hydrogels do not incorporate NPs. It is shown that PANI NPs, dispersed in water, absorb NIR laser light or microwave radiation, increasing their temperature. Upon irradiation of the nanocomposite with microwaves or NIR laser light, the PANI NPs heat up and induce the phase transition of the thermosensitive hydrogel matrix and the internal solution is released. Other nano-objects, such as gold nanorods and PANI nanofibers, are also easily incorporated into the macroporous gel. The resulting nanocomposites also suffer a phase transition upon irradiation with electromagnetic waves. The results suggest that, using a thermosensitive matrix and conducting nanoparticles, mechanical/chemical actuators driven at a distance by electromagnetic radiation can be built. The sensitivity of the nanocomposite to electromagnetic radiation can be modulated by the pH, depending on the nature of the incorporated nanoparticles. Additionally, it is possible to make systems which absorb either NIR or microwaves or both.