RESUMO

Background: Among the main advantages of self-adhesive resin cements comprise good aesthetics, strong restoration-tooth bond and biocompatibility. However, some disadvantages, such as high viscosity level, color limitation and short shelf life should be mentioned. Thus, the aim of the current study was to assess bond strength between fiberglass post and root dentin in teeth subjected to self-adhesive resin cements with expired shelf life and hardness. Material and Methods: Sixty (60) single-rooted human teeth were sectioned and divided into 2 groups of different cements: U200 3M and MaxCem Elite Kerr. Each group was divided into 3 subgroups, based on self-adhesive resin cements' shelf life, namely: Within the use-time recommended by the manufacturer or no expiration date; 6 months after opening the aluminum blister; 12 months after opening the aluminum blister. Bond strength was measured through push-out test conducted in universal testing machine; fracture pattern was analyzed, and microhardness was investigated through Knoop test, based on hardness readings. Data were subjected to Shapiro-Wilk normality test; nonparametric test was applied to hardness data, whereas parametric test was applied to bond strength data. Hardness data were subjected to Kruskal-Wallis test, whereas bond strength data were subjected to analysis of variance, which was followed by Tukey test; both tests were conducted at 5% significance level (α = 0.05). Results: There was no statistically significant difference in knoop hardness values recorded for the material / time / root thirds combination (p=0.483). There was no statistically significant difference in bond strength values recorded for the Material / Time / Thirds combination (p=0.237). Conclusions: It was possible concluding that shelf life did not influence material's hardness and bond strength. Key words:Dental cements, Resin Cements, Shelf Life of Products.

RESUMO

This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Assuntos

RESUMO

OBJECTIVE: This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste. METHODS: Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE00) and subjective (ΔSGU) color and whiteness index (ΔWID) changes were calculated. Patients self-reported the risk and intensity of TS using a visual analogue scale and the volunteer's satisfaction was determined by a questionnaire. Color assessments were analyzed by Kruskal-Wallis followed by Dwas-Steel-Crithlow-Fligner, and absolute TS risk and volunteer's satisfaction by Fisher exact test (p < 0.05). RESULTS: ACPW and ACT promoted similar effects in ΔE00, ΔSGU, and ΔWID to that observed for RT. No significant difference was found in terms of TS risk intensity. TS risk became high after 7 and 14 days, with higher TS prevalence in CP. Volunteers reported that ACPW exhibited the lowest ease-of-use, comfort, and whitening satisfaction among groups (p < 0.05). CONCLUSION: Activated charcoal-based products presented a minor and unsatisfactory whitening effect while CP resulted in optimal tooth whitening and the highest level of satisfaction among volunteers. Risk was higher from 7 days onwards and was more pronounced in the CP. CLINICAL RELEVANCE: Based on the whitening effect and patient satisfaction, this controlled-randomized clinical evidence supports that the use of activated charcoal-based products should be discouraged.

Assuntos

RESUMO

Abstract Objective This study evaluated the color stability of enamel submitted to 10% hydrogen peroxide (HP) followed by antioxidants agents, and the pH and antioxidant activity (AA%) of these agents. Methodology Bovine enamel-dentin blocks were randomly distributed into groups (n=10/group): GNC (negative control: no treatment); GPC (positive control: bleaching only); TOC_10% (HP+10% α-tocopherol); GT_10% (HP+10% green tea extract); GS_5% (HP+5% grape seed extract); SA_10% (HP+10% sodium ascorbate); QUI_10% (HP+10% quinoa extract); and QC_1% (HP+1% quercetin). Color (ΔE00) and whiteness index (ΔWID) changes were analyzed using a digital spectrophotometer. The pH and AA% were determined using a pH meter and the DPPH method, respectively. Data were analyzed by ANOVA/Tukey's and Dunnett's tests (α=0.05). Results At 14 days post-bleaching, GNC promoted the lowest ΔWID and ΔE00 (p<0.05), and no differences were found between GPC and the remaining groups submitted to the antioxidant agents (p>0.05). QC_1% and QUI_10% exhibited acidic pH levels (3.64 and 4.75, respectively), whereas TOC_10% and GS_5% exhibited alkaline pH (7.07 and 7.64, respectively). No differences in AA% were found between the agents (p>0.05), ranging from 92.6 to 97.6%. Conclusion The antioxidant agents did not interfere in bleached enamel color stability, showing satisfactory antioxidant activity. However, QUI and QC gels displayed acidic pH. Clinical significance: The antioxidants evaluated showed high AA% and no impact on post-bleaching color stability, suggesting that their capacity to recover bond strength demonstrated elsewhere would not compromise the esthetic efficacy of tooth bleaching. However, those with acidic pH should be used with caution due to potential enamel damage.

RESUMO

Abstract This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Resumo Este estudo analisou as propriedades físico-químicas dos materiais de ionômero bioativo. Os materiais bioativos Cention N quimicamente ativados (CN) e fotopolimerizados (CN-LC), Equia Forte Fill (EQUI); resina composta convencional Filtek Z350 XT (Z350); resina de ionômero de vidro Riva light Cure (RIVA) e resina composta fluida Filtek Bulk Fill Flow (BULK-F) foram avaliados. Sessenta espécimes (n=10) foram preparados para testes de sorção (SR), solubilidade (SL), resistência à flexão (FS), tensão de contração (SS), grau de conversão (CD), microdureza (MI) e rugosidade da superfície (SR). Os materiais não curados e curados com luz foram avaliados por FTIR. 30 dentes molares humanos foram usados no teste de resistência de união (BS). Os dados foram submetidos a ANOVA e teste de post-hoc Tukey (5% de significância). O EQUI apresentou maior sorção no SR e não mostrou diferença estatística em relação aos grupos RIVA e CN-LC. O grupo CN apresentou maior solubilidade e o EQUI apresentou menor (p<0,05). O BULK-F apresentou maior FS (MPa), sem diferir do CN e do Z350, enquanto o EQUI apresentou o menor FS, não diferindo do RIVA. O BULK-F e o CN-LC apresentaram maior estresse de contração, diferindo do EQUI. O CN-LC e o CN apresentaram maior CD (%), diferindo dos demais, que não apresentaram diferenças (p>0,05) entre si. A EQUI apresentou a maior dureza (p<0,05) no MI. Não houve diferenças (p>0,05) na SR (µm). Z350 and BULK-F apresentaram BS, enquanto a CN-LC apresentou a menor, embora não diferindo da EQUI e da RIVA. A solubilidade e a microdureza do Equia Forte o tornam uma boa alternativa como material restaurador. O grau de conversão e a resistência à flexão do Cention N o tornam uma opção estética ao amálgama.

RESUMO

OBJECTIVE: To evaluate the effects of activated charcoal-based products used in two presentation forms (powder or toothpaste), compared to 10 % carbamide peroxide and conventional toothpaste on aesthetic perception and psychosocial impact before and after treatment. METHODS: Fifty-six participants were divided into 4 experimental groups (n = 14). Activated charcoal-based powder (PW); Activated charcoal-based dentifrice (AC); Conventional fluoride toothpaste (CD) and 10 % carbamide peroxide (CP). All products were used for 14 days. Psychosocial impact on dental esthetics (PIDAQ), oral health impact profile (OHIP- Esthetics) and orofacial esthetics scale (OES) questionnaires were applied before and after treatment. Descriptive and exploratory data analyses were performed and analyzed using linear mixed models for repeated measures over time considering significance level of α = 0.05. RESULTS: For PIDAQ, the CP group showed significant decrease in psychological impact, aesthetic perception domains and overall score, while in the PW group, there was only a significant decrease in the psychological impact domain. Decrease in OHIP was observed for the functional limitation domain scores for treatments with CP and PW, in the psychological discomfort domain, decrease was observed for all groups, while for the OES questionnaire, significant increase in the color domain was observed for the CP group. CONCLUSION: Activated charcoal-based products showed lower scores in all questionnaires when compared with carbamide peroxide; thus, charcoal-based products promoted lower impact on quality of life and aesthetic perception. CLINICAL RELEVANCE: In this randomized clinical trial, charcoal-based OTC products had inferior quality of life and aesthetic perception results compared to conventional carbamide peroxide bleaching.

Assuntos

RESUMO

OBJECTIVES: To assess the anti-proteolytic effect and potential to inhibit dentin root caries progression of a silver nanoparticle and fluoride solution (CNanoF) in comparison to silver diamine fluoride (SDF). METHODS: 48 specimens of root dentin artificial caries lesion were treated with 38% SDF, CNanoF, CNano or F (n = 6 per group). Ph cycling with demineralization and remineralization solutions simulated caries lesion progression. In addition, specimens were incubated with or without bacterial collagenase in the remineralization solution to induce dentin proteolytic degradation. Dentin degradation was assessed by weight loss rate and hydroxyproline (Hyp) release. Changes in cross-sectional microhardness, and lesion permeability and collagen integrity as determined by confocal laser scanning microscopy indicated potential for further demineralization inhibition. The effect of the solutions on the activity of metalloproteinases (MMP) -2 and -9 was also investigated. Statistical analysis consisted of ANOVA, Kruskal-Wallis, and linear mixed models with post-hoc pairwise Tukey, Dunn, and t-tests (α = 0.05). RESULTS: Treatment with SDF resulted in lower weight loss rate than did other solutions, but all groups showed similar Hyp release (p = 0.183). SDF resulted in greater microhardness at superficial layers of the caries lesions (p<0.05), while there were no differences among CNanoF, CNano, and F. Lesion permeability was similar among all groups after pH cycling (p>0.05), with or without the use of collagenase (p = 0.58). No statistically significant difference was noted among solutions regarding collagen integrity after pH cycling; however, SDF-treated dentin had a significant decrease in collagen integrity when collagenase was used (p = 0.003). Interestingly, only SDF was able to completely inactivate MMP-2 and -9. CONCLUSIONS: CNanoF and SDF both potentially prevent dentin degradation during caries lesion progression in vitro; however, SDF was more effective at inhibiting further tissue demineralization.

Assuntos

RESUMO

OBJECTIVE: Assess the effects of activated charcoal-based products on whitening and changes on dental enamel surface. MATERIAL AND METHODS: Fifty-two blocks of bovine dental enamel were randomly distributed in four groups (n = 13): brushing with activated charcoal-based powder (PW); brushing with activated charcoal-based dentifrice (AC); brushing with a conventional dentifrice containing 1450 ppm of fluoride (CD); and whitening with 10% carbamide peroxide (CP). Color, microhardness, and surface alteration were analyzed at baseline and after 14 days of treatment. Three samples per group were randomly selected and examined using scanning electron microscopy (SEM) to analyze the morphology. RESULTS: PW exhibited greater color change for the ΔE00 , ΔWID, Δb* and ΔL* parameters than other groups (p < 0.05). After treatment, microhardness decreased in AC and CP groups (p < 0.05). Also, PW and AC groups showed more surface alteration than CD and CP (p < 0.001). Changes in the morphology of dental enamel were observed by SEM in PW and AC groups. CONCLUSION: Activated charcoal-based products showed a lower whitening effect than 10% carbamide peroxide. These products also influenced dental enamel microhardness, resulting in greater surface alteration. CLINICAL SIGNIFICANCE: Activated charcoal-based products promoted minimum whitening effects with significant enamel surface alteration. The 10% carbamide peroxide was more effective for whitening and caused slight enamel surface alteration.

Assuntos

RESUMO

The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.

Assuntos

RESUMO

Abstract The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.

Resumo Os objetivos deste estudo clínico foram avaliar a alteração de cor - ΔE (baseada em espectrofotometria e análise visual) e luminosidade - L* (baseada em espectrofotometria) da superfície do esmalte dentário (após tratamento ortodôntico) ao redor da área onde os braquetes ortodônticos foram fixados, com base em diferentes materiais de cimentação, como resina (grupo R) e cimento de ionômero de vidro modificado por resina (grupo RMGIC). Estudo boca dividida foi inicialmente composto por 14 pacientes. Os braquetes ortodônticos foram fixados nos incisivos centrais superiores com resina ou RMGIC. A cor da superfície vestibular de cada dente foi mensurada por espectrofotometria e avaliada por exame visual antes do processo de fixação dos braquetes. Quatro indivíduos foram excluídos durante o acompanhamento; assim, 10 pacientes foram avaliados (n=10). Os braquetes foram removidos após 12 meses de tratamento ortodôntico, a mensuração da cor do dente e o exame visual foram realizados novamente, e o Índice de Remanescente do Adesivo (IRA) também foi mensurado. Os resultados ΔE e L* foram submetidos ao teste t de Student e à análise de variância para medidas repetidas, respectivamente (α=0.05). Os dados do ARI foram analisados em porcentagens. Houve diferença estatisticamente significativa no ΔE entre os grupos; o grupo R apresentou valores estatisticamente maiores de L* após o tratamento ortodôntico. O IRA 2 e 3 prevaleceu no grupo RMGIC, enquanto o grupo R apresentou 0 e 1. Após o tratamento ortodôntico, o grupo RMGIC apresentou menores alterações no ΔE e o aumento da escala branca foi observado na superfície do esmalte ao redor da área onde os braquetes foram fixados no grupo R. A análise visual não mostrou mudança de cor nos dentes avaliados.