RESUMO

A complaint by a customer to a food company claimed that the consumption of a chocolate candy fractured his anterior teeth, due to its hard consistency. Fragments of the fractured teeth and the chocolate candy that supposedly caused it were collected, examined and photographed. Fragments presented caries, large restorations, and suggested previous endodontic treatment. To evaluate causation, the food company requested a laboratory analysis, which simulated the human bite on chocolate candies of the same brand. Human teeth were assembled in a simulating device of masticatory functions of apprehension and incision. Teeth used were either sound or with non-restored endodontic accesses, to simulate previous conditions of the collected fragments. Twenty chocolate candies, cooled in a freezer to 0 °C for 2 h were used as test foods, and were positioned between the teeth of the device at the moment of the test. The set was put in a dynamometer, programmed to apply increasing forces (rate of advance of 5 mm/min), until rupture (either of the specimen or of the teeth). The applied force, in N, at the time of fracture was recorded and analyzed. The average force to fracture the test food was 233.23 N. No tooth was fractured in the experiment. Forces ranging from 191.3 to 275.2 N, applied to chocolate candies were not sufficient to neither fracture human teeth nor cause any structural damage. It was concluded that the dental fracture occurred because of previous oral health conditions of the customer.

Assuntos

RESUMO

Objective - To evaluate in vitro adhesion of endodontic sealers Rickert, AH Plus, Sealapex and Epiphany to dentin previously conditioned with one of two different chemical solutions. Methods - A total of 80 specimens were made up with bovine incisive teeth that were prepared by cutting predetermined sections and wearing them, producing standard experimental samples. Forty samples were treated with 2.5% sodium hypochlorite and divided into four groups with 10 specimens each, to be coated with the different sealers. Dentin of other forty samples was treated with 17% EDTA, and these samples were also divided into four groups. Prepared specimens were hydrated uniformly, dried, bonded and kept at 37°C and 100% relative humidity. After 72 hours, specimens were analyzed using an Instron universal testing machine in traction mode. Data were analyzed by Kruskal-Wallis test (?=0.05). Results - EDTA treatment led to the greatest adhesiveness in all experimentalgroups. Conclusion - It was concluded that conditioning of the surface with chelating agents increase adhesiveness of the tested sealers and similar behavior was observed in the adhesion of epoxy-based and methacrylate-based sealers.

Objetivo - Avaliar in vitro a adesão dos cimentos endodônticos Rickert, AH Plus, Sealapex e Epiphany à dentina previamente tratada por duas soluções irrigadoras. Métodos - Foram empregados 80 corpos de prova obtidos a partir de dentes incisivos bovinos que foram preparados por cortes e desgastes pré-estabelecidos, resultando em modelos experimentais padronizados. Quarenta dessas amostras foram tratadas com hipoclorito de sódio 2,5% e subdivididas em quatro grupos de 10 espécimes para cada cimento. As demais 40 amostras tiveram a dentina tratada com EDTA a 17% e foram divididos igualmente em 4 grupos. Os espécimes preparados foram uniformemente hidratados, secos, receberam os cimentos, e foram mantidos sob umidade relativa a 37ºC. Após 72 horas os espécimes foram submetidos a testes de tração com auxilio da máquina de ensaio universal Instron, sendo os dados analisados pelo teste de Kruskal-Wallis (?=0.05). Resultados - O tratamento com EDTA proporcionou maiores índices de adesão para todos os grupos experimentais (p<0.05). Conclusão - Pode-se concluir que o tratamento da superfície com agente quelante, aumenta a capacidade de adesão dos cimentos testados. Não houve diferença na adesão dos cimentos a base de resina epóxica e a base de metacrilatos.

Assuntos

RESUMO

La incompleta obturación del sistema de conductos radiculares es uno de los motivos del fracaso en el tratamiento endodóntico. La presencia de espacios en el material obturador puede permitir la filtración en los sentidos apical y coronario. A medida que nuevos materiales son propuestos, se deben realizar investigaciones para la evaluación de todas sus propiedades. Dentro de ellas se puede destacar la capacidad selladora del material obturador en el interior de los conductos radiculares. Varias metodologías han sido preconizadas para esta finalidad. La literatura indica que han sido cuestionables la falta de estandarización y correlación entre estos métodos y los resultados de estas investigaciones. La falta de métodos confiables hace que estos materiales sean empleados en la práctica clínica de forma enpírica, en lo que respecta a esta propiedad. El propósito de este trabajo fue analizar metodologías de evaluación de la capacidad selladora de materiales obturadores endodónticos, buscando estudiar detalladamente sus variables y correlacionar los resultados de estas investigaciones con la práctica clínica

The incomplete filling of the root canal systen is one of the reasons for endodontic treatment failure. The presence of gaps in the seal material can allow leakage into the apical and coronary senses. As new materials are proposed, investigations must be conducted for the evaluation of all its properties. Within then you can highlight the sealing capacity of the filling material inside the root canals. Several methods have been advocated for this purpose. Therefore, the literature points towards the lack of standardization and correlation between these methods and the results of these investigations have been questionable. The lack of reliable methods makes the clinical use of these materials enpirical. The goal of this paper is to discuss methodologies for assessing the sealing ability of endodontic filling materials, seeking to study in detail the variables and correlate the results of these researchs with the clinical practice

Assuntos

RESUMO

Introdução: O sucesso da terapia endodôntica está condicionado adiversos fatores, entre os quais o uso de substâncias químicas deboa qualidade. Objetivo: Neste trabalho investigaram-se algumascaracterísticas das soluções de hipoclorito de sódio utilizadas emclínicas de atendimento, tais como concentração, pH e armazenagem.Material e métodos: Para isso, distribuiu-se formulário com perguntasrelativas à solução empregada a 100 endodontistas, além de pedir-lhes100 ml do produto. As amostras foram levadas ao laboratório paraanálise por titulometria da concentração de cloro residual livre, bemcomo do pH das soluções, com o auxílio de um peagômetro. Resultados:Apenas 1% dos profissionais conhece o valor do pH das soluções. Dasamostras recolhidas, 36% apresentaram pH 9, 22% pH 10, 16% compH 13, 14% pH 12, 11% pH 11 e 1% pH 8. Quanto aos profissionais,37% mantinham seus frascos sob refrigeração e 67% em temperatura ambiente. Conclusão: Os endodontistas usam soluções de hipocloritode sódio diferentes daquelas que desejam por desconhecerem ascondições necessárias para a manutenção da estabilidade química.

Introduction: The success of endodontic therapy is conditioned byseveral variables, being the use of good quality chemical agents one ofthem. Objective: In this study, some characteristics of commonly usedsodium hypochlorite irrigants were investigated, such as: concentration,pH, and storage conditions. Material and methods: For this purpose, aquestionnaire comprising questions regarding the employed irrigant wassent to 100 endodontists. Besides that, a 100mL sample of the sodiumhypochlorite irrigant used by them was collected. Free residual chlorinedetermination was laboratorially carried out through titration method.Additionally, pH was measured, through peagameter reading. Results:Only 1% of the professionals did know the pH value of the solutionsused by them. Concerning to pH value, 36% of the solutions presentedpH 9; 22%, pH 10; 16%, pH 13; 14%, pH 12; 11%, pH 11; and 1%, pH8. 37% of the endodontists kept the solution flasks under refrigeration,and 67% kept them at environmental temperature. Conclusion: It can beconcluded that the endodontists are using altered hypochlorite solutionsbecause they fail to observe the necessary conditions for maintainingthe solution?s chemical stability.

RESUMO

O uso de diferentes tipos de medicação intracanal para o controle do processo infeccioso, principalmente nos casos em que há presença de micro-organismos resistentes às manobras de desinfecção, tem sido alvo de muitas pesquisas. Os micro-organismos resistentes foram selecionados à medida que a prescrição de antibióticos passou a ser indiscriminada pelos próprios profissionais das áreas da saúde. Apesar de centros de pesquisas nos Estados Unidos da América do Norte, França e Repúblicas Soviéticas continuarem os estudos sobre fagoterapia, somente na década de 1980 ela foi redescoberta, despertando novamente o interesse da comunidade científica mundial. A fagoterapia poderá ser usada, no futuro, isoladamente na eliminação de bactérias resistentes aos antibióticos, ou associada à antibioticoterapia, em casos nos quais há presença de bactérias ainda suscetíveis às drogas. O irreversível e preocupante aumento da resistência bacteriana aos quimioterápicos abriu um novo caminho à fagoterapia, principalmente em casos em que já se esgotaram as alternativas para controle de sinais e sintomas característicos dos processos infecciosos refratários.

Many studies have investigated diverse intracanal medications to control the infectious process, especially in cases of microorganisms that are resistant to disinfection procedures. Drug-resistant microorganisms have been proliferating because of the indiscriminate use of antibiotics by healthcare professionals. Although research centers in the United States, France, and former Soviet States never stopped conducting studies on phage therapy, this concept was only rediscovered in the 1980s, again drawing the interest of the global scientific community. In the future, phage therapy may be used alone to eliminate antibiotic-resistant bacteria, or together with antibiotic therapy in cases where antibiotics still work. The irreversible increase in drug-resistant bacteria is cause for concern and has created a new role for phage therapy, especially in cases where the alternatives to control the signs and symptoms of drug-resistant infectious processes have been exhausted.

Assuntos

RESUMO

OBJECTIVE: To verify the effect of scaling and root planing on the antimicrobial activity of intracanal medications on the external root surface of periodontally compromised teeth. METHOD AND MATERIALS: Forty single-rooted extracted teeth were randomly assigned for visible calculus removal or scaling and root planing. Samples were separated into four groups-chlorhexidine, tetracycline hydrochloride, calcium hydroxide, or saline solution-and immersed in semisolid media and seeded with Micrococcus luteus for 24 hours. The zones of inhibition were measured using a profile projector. RESULTS: Calcium hydroxide and saline solution did not show bacterial growth inhibition. Chlorhexidine and tetracycline showed the occurrence of zones of inhibition in 70% and 40% of specimens, respectively. CONCLUSION: Partial antimicrobial activity on the external root surface was found when chlorhexidine and tetracycline solutions were used as intracanal medications; however, root planing procedures may modify this condition.

Assuntos

RESUMO

OBJECTIVE: The aim of this study was to evaluate the morphology and permeability of root canal walls irradiated with Er,Cr:YSGG laser after conventional endodontic treatment. BACKGROUND: Laser irradiation can be used for dentinal tubule exposure, smear layer removal, and disinfection. Another potential, interesting application is as an adjunct to endodontic treatment, especially in the intracanal medication phase. METHODS: Fifty-two single-rooted teeth had their crowns sectioned at the cementoenamel junction and were randomly divided into four groups (n = 13): G1: conventional preparation (CP) + irrigation with EDTA-T + rhodamine B dye solution associated with NDP (dexamethasone phosphate, paramonochlorophenol, polyethylenoglycol) (Rhod-NDP); G2: CP + EDTA-T + Er,Cr:YSGG laser irradiation 0.75 W + Rhod-NDP; G3: CP + EDTA-T + Er,Cr:YSGG 1.5 W + Rhod-NDP; G4: CP + EDTA-T + Er,Cr:YSGG 2.5 W + Rhod-NDP. For the permeability analysis (n = 9), teeth were transversely cut and two slices of each third were selected. The images were analyzed by ImageLab software (Softium Informática Ltda., São Paulo, SP, Brazil). Additional samples (n = 4) were examined by scanning electron microscopy. RESULTS: Data were analyzed statistically using the Kruskal-Wallis and Student-Newman-Keuls tests for the following areas: apical third (H = 23.4651): G1 (14.25)(a), G2 (17.66)(ab), G3 (26.50)(b), G4 (39.58)(c); medium (H = 23.1611): G1 (14.16)(a), G2 (16.66)(ab), G3 (28.83)(b), G4 (38.33)(b); and cervical (H = 32.4810): G1 (9.66)(a), G2 (20. 00)(ab), G3 (27.00)(b), G4 (41.33)(c), (p < 0.01). Despite the irregular aspect of laser irradiation along the canal walls, the parameters of 1.5 W and 2.5 W allowed morphologic modifications that increased dentinal permeability. CONCLUSIONS: Irradiation with Er,Cr:YSGG laser could be effective in endodontic treatment for increasing dentinal permeability.

Assuntos

RESUMO

PURPOSE: Surface sealants may reduce or avoid problems related to the marginal interface. The aim of this study was to evaluate the microleakage in resin composite Class V restorations sealed with an adhesive system (Xeno III [Dentsply, Konstanz, Germany]), a sealant for exposed dentin (Seal & Protect [Dentsply]), and two surface sealants (Fortify [Bisco, Lombard, IL, USA]; Optiguard [Kerr, Orange, CA, USA]). MATERIALS AND METHODS: Fifty cavities with margins in enamel were prepared on crowns of bovine teeth and restored with an adhesive system (Prime and Bond NT/Dentsply) and resin composite (Esthet X/Dentsply). They were separated into four groups for the application of the surface sealants, and a control group (without surface sealing). Thermal cycling with baths of 5 degrees C +/- 2 degrees C and 55 degrees C +/- 2 degrees C were performed in 600 cycles. The teeth were made impermeable, except for a 3-mm window around the restoration and immersed in a 50% silver nitrate solution for 8 hours. The crown was sectioned longitudinally and the cuts were analyzed by three independent evaluators, using a stereoscopic loupe with 10x magnification that attributed representative scores. Agreement among the examiners was evaluated by the Kappa test. RESULTS: The Kruskal-Wallis test and Dunn Method showed that there was significant difference between the Control and Seal & Protect groups. The Seal & Protect group presented the lowest degree of microleakage, followed by the Optiguard and Xeno III groups. The highest scores were obtained in the Control group. CONCLUSION: The sealant materials evaluated presented different rates of effectiveness, and Seal & Protect was the most effective in decreasing the degree of marginal microleakage. CLINICAL SIGNIFICANCE Although surface sealants or covering agents have been used to diminish microleakage, they may present different rates of effectiveness with regard to reducing the degree of marginal leakage. (J Esthet Restor Dent 21:397-406, 2009).

Assuntos

RESUMO

Accelerated stability tests are indicated to assess, within a short time, the degree of chemical degradation that may affect an active substance, either alone or in a formula, under normal storage conditions. This method is based on increased stress conditions to accelerate the rate of chemical degradation. Based on the equation of the straight line obtained as a function of the reaction order (at 50 and 70 degrees C) and using Arrhenius equation, the speed of the reaction was calculated for the temperature of 20 degrees C (normal storage conditions). This model of accelerated stability test makes it possible to predict the chemical stability of any active substance at any given moment, as long as the method to quantify the chemical substance is available. As an example of the applicability of Arrhenius equation in accelerated stability tests, a 2.5% sodium hypochlorite solution was analyzed due to its chemical instability. Iodometric titration was used to quantify free residual chlorine in the solutions. Based on data obtained keeping this solution at 50 and 70 degrees C, using Arrhenius equation and considering 2.0% of free residual chlorine as the minimum acceptable threshold, the shelf-life was equal to 166 days at 20 degrees C. This model, however, makes it possible to calculate shelf-life at any other given temperature.

Assuntos

RESUMO

Accelerated stability tests are indicated to assess, within a short time, the degree of chemical degradation that may affect an active substance, either alone or in a formula, under normal storage conditions. This method is based on increased stress conditions to accelerate the rate of chemical degradation. Based on the equation of the straight line obtained as a function of the reaction order (at 50 and 70 ºC) and using Arrhenius equation, the speed of the reaction was calculated for the temperature of 20 ºC (normal storage conditions). This model of accelerated stability test makes it possible to predict the chemical stability of any active substance at any given moment, as long as the method to quantify the chemical substance is available. As an example of the applicability of Arrhenius equation in accelerated stability tests, a 2.5 percent sodium hypochlorite solution was analyzed due to its chemical instability. Iodometric titration was used to quantify free residual chlorine in the solutions. Based on data obtained keeping this solution at 50 and 70 ºC, using Arrhenius equation and considering 2.0 percent of free residual chlorine as the minimum acceptable threshold, the shelf-life was equal to 166 days at 20 ºC. This model, however, makes it possible to calculate shelf-life at any other given temperature.

Testes acelerados de estabilidade são indicados para avaliar, em um curto período de tempo, o grau de degradação química que poderá afetar uma substância química, isoladamente ou quando inserida em uma fórmula, sob condições normais de armazenamento. Este método está fundamentado na intensificação das condições de estresse para acelerar a velocidade de degradação química. Baseando-se na equação da reta obtida e na ordem de reação determinada (a 50 e 70 ºC) e usando a equação de Arrhenius, a velocidade de reação foi calculada para a condição de temperatura de 20ºC (condições normais de armazenamento). Este modelo de teste acelerado de estabilidade torna possível a predição da estabilidade química de qualquer substância, em qualquer tempo, desde que o método de quantificação da substância química esteja disponível. Como exemplo da aplicabilidade da equação de Arrhenius em teste acelerado de estabilidade, uma solução de hipoclorito de sódio a 2,5 por cento foi analisada por ser quimicamente instável. A quantificação do cloro residual livre foi determinada através de titulação iodométrica. A partir dos dados obtidos decorrentes das amostras submetidas às temperaturas de 50 e 70 ºC e com o emprego da equação de Arrhenius, o tempo de prateleira obtido foi de 166 dias em temperatura de 20 ºC, considerando como limite inferior a concentração de 20 mg/mL de cloro residual livre. Este modelo, entretanto, possibilita o cálculo de tempo de prateleira em qualquer outra temperatura de interesse.

Assuntos