RESUMO

OBJECTIVE: To evaluate the long-term survival and success rates of implants placed in reconstructed areas using microvascularized or non-microvascularized extraoral bone grafts. MATERIALS AND METHODS: An electronic search was performed in five databases and in gray literature for articles published until June, 2023. The eligibility criteria comprised observational studies (prospective or retrospective) and clinical trials, reporting survival and success rates of implants placed in extraoral bone grafts. A meta-analysis (implant failure) was categorized into subgroups based on the type of bone graft used. The risk of bias within studies was assessed using the Newcastle-Ottawa Scale. RESULTS: Thirty-one studies met the inclusion criteria. The mean follow-up time was 92 months. The summary estimate of survival rate at the implant level were 94.9% (CI: 90.1%-97.4%) for non-vascularized iliac graft, 96.5% (CI: 91.4%-98.6%) for non-vascularized calvaria graft, and 92.3% (CI: 89.1%-94.6%) for vascularized fibula graft. The mean success rate and marginal bone loss (MBL) were 83.2%; 2.25 mm, 92.2%; 0.93 mm, and 87.6%; 1.49 mm, respectively. CONCLUSIONS: Implants placed in areas reconstructed using extraoral autogenous bone graft have high long-term survival rates and low long-term MBLs. The data did not demonstrate clinically relevant differences in the survival, success, or MBL of grafts from different donor areas or with different vascularization. This systematic review was registered in INPLASY under number INPLASY202390004.

Assuntos

RESUMO

Bone tissue engineering seeks biomaterials that enable cell migration, angiogenesis, matrix deposition, and tissue regeneration. Blood concentrates like platelet-rich fibrin (L-PRF) offer a cost-effective source of cells and growth factors to enhance healing. The present study aimed to evaluate heated serum albumin with liquid PRF (Alb-PRF) and L-PRF clinically and biochemically after placement in dental sockets following mandibular third molar extraction. In a controlled, split-mouth study involving 10 volunteers, 20 extracted molars were treated with either Alb-PRF or L-PRF. Post-extraction, pain, trismus, infection presence, and swelling were measured. The concentrations of different analytes in the surgical sites were also examined. The data were statistically analyzed, with significance defined at p < 0.05 (t-test). No significant difference was noted between the groups for pain and trismus, but Alb-PRF showed a significant reduction in swelling on day seven. The Alb-PRF group showed lower levels of pro-inflammatory cytokines (GM-CSF, IL-1b, IL-6, IFNy, IL-8, IL-15, RANTES, and MIP-1a) after seven days, with only higher expressions of MIP-1b, IL-1b, and MCP-1 found in the L-PRF group. Differences were observed in the release of analytes between L-PRF and Alb-PRF, with Alb-PRF significantly reducing edema after seven days. Alb-PRF reduced edema, while L-PRF increased inflammatory cytokines. When compared to L-PRF, Alb-PRF reduced edema and the release of inflammatory cytokines, suggesting promising effects in socket healing while underscoring the role of growth factors and cytokines in potential applications of blood concentrates.

RESUMO

This study aimed to analyze the physicochemical and histological properties of nanostructured hydroxyapatite and alginate composites produced at different temperatures with and without sintering and implanted in rabbit tibiae. Hydroxyapatite-alginate (HA) microspheres (425-600 µm) produced at 90 and 5 °C without (HA90 and HA5) or with sintering at 1000 °C (HA90S and HA5S) were characterized and applied to evaluate thein vitrodegradation; also were implanted in bone defects on rabbit's tibiae (n= 12). The animals were randomly divided into five groups (blood clot, HA90S, HA5S, HA90, and HA5) and euthanized after 7 and 28 d. X-ray diffraction and Fourier-transform infrared analysis of the non-sintered biomaterials showed a lower crystallinity than sintered materials, being more degradablein vitroandin vivo. However, the sinterization of HA5 led to the apatite phase's decomposition into tricalcium phosphate. Histomorphometric analysis showed the highest (p< 0.01) bone density in the blood clot group, similar bone levels among HA90S, HA90, and HA5, and significantly less bone in the HA5S. HA90 and HA5 groups presented higher degradation and homogeneous distribution of the new bone formation onto the surface of biomaterial fragments, compared to HA90S, presenting bone only around intact microspheres (p< 0.01). The elemental distribution (scanning electron microscope and energy dispersive spectroscopy andµXRF-SR analysis) of Ca, P, and Zn in the newly formed bone is similar to the cortical bone, indicating bone maturity at 28 d. The synthesized biomaterials are biocompatible and osteoconductive. The heat treatment directly influenced the material's behavior, where non-sintered HA90 and HA5 showed higher degradation, allowing a better distribution of the new bone onto the surface of the biomaterial fragments compared to HA90S presenting the same level of new bone, but only on the surface of the intact microspheres, potentially reducing the bone-biomaterial interface.

Assuntos

RESUMO

This systematic review (SR) aimed to evaluate the antimicrobial potential of different types of platelet-rich fibrin (PRF) often used in regenerative treatments. An electronic search was performed in four databases and in Gray literature for articles published until January, 2023. The eligibility criteria comprised in vitro studies that evaluated the antimicrobial effect of different types of PRF. For the analysis of the risk of bias within studies, the modified OHAT (Office of Health Assessment and Translation) tool was used. For the evaluation of the results, a qualitative critical analysis was carried out in the synthesis of the results of the primary studies. Sixteen studies published between 2013 and 2021 were included in this SR. The antimicrobial effects of PRF variations (PRF, injectable PRF [I-PRF], PRF with silver nanoparticles [agNP-PRF], and horizontal PRF [H-PRF]), were analyzed against 16 types of bacteria from the oral, periodontal, and endodontic environments. All types of PRF showed significant antimicrobial action, with the antibacterial efficacy being more expressive than the fungal one. The I-PRF, H-PRF, and agNP-PRF subtypes improve antimicrobial activity. According to the OHAT analysis, no study was classified as having a high risk of bias. Evidence suggests that PRF variations have significant antimicrobial activity, with bacterial action being greater than fungal. Evolutions such as I-PRF, H-PRF, and agNP-PRF improve antimicrobial activity. Future studies analyzing the clinical effect of these platelets are fundamental. This SR was registered in INPLASY under number INPLASY202340016.

RESUMO

OBJECTIVE: This in vivo study, aimed to biomechanically, histomorphometrically and histologically evaluate an implant surface coated with nanostructured hydroxyapatite using the wet chemical process (biomimetic deposition of calcium phosphate coating) when compared to a dual acid-etching surface. MATERIAL AND METHODS: Ten sheep (2-4 years old) received 20 implants, 10 with nanostructured hydroxyapatite coating (HAnano), and 10 with dual acid-etching surface (DAA). The surfaces were characterized with scanning electron microscopy and energy dispersive spectroscopy; insertion torque values and resonance frequency analysis were measured to evaluate the primary stability of the implants. Bone-implant contact (BIC) and bone area fraction occupancy (BAFo) were evaluated 14 and 28 days after implant installation. RESULTS: The HAnano and DAA groups showed no significant difference in insertion torque and resonance frequency analysis. The BIC and BAFo values increased significantly (p<0.05) over the experimental periods in both groups. This event was also observed in BIC value of HAnano group. The HAnano surface showed superior results compared to DAA after 28 days (BAFo, p = 0.007; BIC, p = 0.01). CONCLUSION: The results suggest that the HAnano surface favors bone formation when compared to the DAA surface after 28 days in low-density bone in sheep.

Assuntos

RESUMO

Amplamente utilizados para substituir dentes perdidos, os implantes dentários nos últimos anos vêm apresentando tecnologias como superfícies com micro e nanotopografia e ajustes nas composições químicas, dentre outros, para melhorar a osseointegração e reduzir o prazo de tratamento, permitindo, assim, carga funcional imediata ou precoce em pacientes com densidade óssea reduzida. Vários métodos são aplicados com intuito de modificar a superfície do implante, como jateamento com areia, corrosão ácida, oxidação anódica, tratamento com flúor, usinagem, pulverização de plasma de titânio e revestimento de fosfato de cálcio; esses métodos podem aumentar notavelmente a área de superfície quando operada a técnica adequadada de modificação, quer por procedimento de adição ou subtração. Tais modificações promovem superfícies rugosas, as quais aumentam a porcentagem de contato osso-implante (BIC) durante o processo de cicatrização óssea inicial. Os principais benefícios da modificação da superfície são melhorar a molhabilidade (hidrofilicidade), adesão e fixação de células a implantes e proliferação celular. Dentre os tratamentos de superfície de implantes dentários destaca-se o jateamento de areia com granulação grossa e ataque-ácido com HCL/H2SO4 (SLA) em altas temperaturas, o revestimento de superfície do implante com hidroxiapatita, oxidação anódica e o duplo ataque ácido. O objetivo deste trabalho é realizar uma revisão de literatura discutindo a importância e eficácia desses métodos para a osseointegração e, por conseguinte, para a redução do período de tratamento.

Widely used to replace lost teeth, dental implants have been presenting technologies such as surfaces with micro and nano topography and adjustments in chemical compositions, among others, to improve osseointegration and reduce treatment time, thus allowing immediate or early functional load in patients with reduced bone density. Several methods are applied to modify the implant surface, such as sandblasting, acid corrosion, anodic oxidation, fluoride treatment, machining, titanium plasma spraying, and calcium phosphate coating; these methods can notably increase the surface area when the appropriate modification technique is operated, either by the addition or subtraction procedure. Such modifications promote rough surfaces, which increase the percentage of bone-implant contact (BIC) during the initial bone healing process. The main benefits of surface modification are to improve wettability (hydrophilicity), adhesion and attachment of cells to implants, and cell proliferation. Among the surface treatments for dental implants, sandblasting with large grit and acid-etching with HCL/H2SO4 (SLA) stands out at high temperatures. The surface coating of the implant with hydroxyapatite, anodic oxidation, and double acid-etching. This work aims to conduct a literature review discussing the importance and effectiveness of these methods for osseointegration and, therefore, for reducing the treatment period.

Assuntos

RESUMO

BACKGROUND: Zygomatic implants (ZI) have been frequently indicated to rehabilitate patients with extensive atrophies in alternatives to major bone reconstructions. It can be installed inside the maxillary sinus, called instrasinus zygomatic implant (IZI) or outside the maxillary sinus (EZI), depending on the surgery technique. OBJECTIVE: To evaluate the survival and complication rates of ZI in longitudinal studies when compared with conventional implants (CI). METHODS: An electronic search was performed in five databases and in Gray literature for articles published until April, 2022. The eligibility criteria comprised observational cohort studies (prospective or retrospective) and randomized clinical trials (RCTs) with at least 5 years of follow-up, reporting survival rate of ZI versus CI. A meta-analysis was conduct with 18 studies. RESULTS: A total of 5434 implants (2972 ZI and 2462 CI) were analyzed in 1709 patients. The mean survival rate was 96.5% ± 5.02 and 95.8% ± 6.36 for ZI and CI, respectively (mean follow-up time of 78 months). There were observed no statistically significant between ZI and CI in prospective studies (risk ratio [RR] of 1.21; 95% confidence intervals [CIs]: 0.28 to 5.28; chi-squared [Chi2 ] = 11.37; I2  = 56%; degrees of freedom [df] = 5; z-score = 0.25; P = 0.80), retrospective studies IZI (RR of 1.29; 95% CIs: 0.52 to 3.23; Chi2  = 4.07; I2  = 2%; df = 4; z-score = 0.55; P = 0.58) and retrospective studies EZI (RR of 0.72; 95% CIs: 0.31 to 1.66; Chi2  = 1.99; I2  = 0%; df = 3; z-score = 0.78; P = 0.44). The biological complications most related to ZI was sinusitis, followed by infection and oroantral communication. CONCLUSION: ZI have a high long-term survival rate (96.5% with a mean of 91.5 months of follow-up), showing no significant difference when compared with CI. The most prevalent biological complication is sinusitis, being most commonly to the IZI technique. This systematic review (SR) was registered in INPLASY under number INPLASY202280025.

Assuntos

RESUMO

Background and objectives: Calcium phosphates have been widely used as bone substitutes, but their properties are limited to osteoconduction. The association of calcium phosphates with osteoinductive bioactive molecules has been used as a strategy in regenerative medicine. Melatonin has been studied due to its cell protection and antioxidant functions, reducing osteoclastic activity and stimulating newly formed bone. This study aimed to evaluate the effect of topical application of melatonin associated with nanostructured carbonated hydroxyapatite microspheres in the alveolar bone repair of Wistar rats through histological and histomorphometric analysis. Materials and Methods: Thirty female Wistar rats (300 g) were used, divided randomly into three experimental groups (n = 10), G1: nanostructured carbonated hydroxyapatite microspheres associated with melatonin gel (CHA-M); G2: nanostructured carbonated hydroxyapatite (CHA); G3: blood clot (without alveolar filling). The animals were euthanized after 7 and 42 days of the postoperative period and processed for histological and histomorphometric evaluation. Kruskal-Wallis and Dunn's post-test were applied to investigate statistical differences between the groups at the same time point for new bone and connective tissue variables. Mann-Whitney was used to assess statistical differences between different time points and in the biomaterial variable. Results: Results showed a greater volume of residual biomaterial in the CHA-M than the CHA group (p = 0.007), and there were no significant differences in terms of newly formed bone and connective tissue between CHA and CHA-M after 42 days. Conclusions: This study concluded that both biomaterials improved alveolar bone repair from 7 to 42 days after surgery, and the association of CHA with melatonin gel reduced the biomaterial's biodegradation at the implanted site but did not improve the alveolar bone repair.

Assuntos

RESUMO

Background: Bioceramic nanometer coatings have been regarded as potential substitutes for plasma-sprayed hydroxyapatite coatings, and the association with bone morphogenetic protein (BMP) is an attempt to achieve faster osseointegration to hasten oral rehabilitation. Objective: This study aimed to investigate the effect of recombinant human bone morphogenetic protein-7 (rhBMP-7) on the osseointegration of titanium implants coated with a thin film surface of hydroxyapatite (HA). Methods: Two implants (n = 24) were placed in each white New Zealand rabbits' femur (n = 6). Implants were placed in the right femur after standard instrumentation (A and B) and in the left femur after an over-instrumentation (C and D), preventing bone-implant contact. The distal implants were installed associated with rhBMP-7 (groups B [regular instrumentation] and D [over-instrumentation]) and, also, in the absence of without BMP (control groups A [regular instrumentation] and C [over-instrumentation]). After 4 weeks, the animals were euthanized. The bone blocks containing the implants were embedded in methyl methacrylate and sectioned parallel to the long axis of the implant, which were analyzed by image segmentation. The data were analyzed using a nonparametric statistical method. Results: We observed that Group A had a mean bone formation of 35.6% compared to Group B, which had 48.6% (p > 0.05). Moreover, this group showed 28.3% of connective tissue compared to Group A, with 39.3%. In the over-instrumented groups, rhBMP-7 (Group D) showed an enhanced and significant increase in bone formation when compared with the group without rhBMP-7 (Group C). Conclusion: We concluded that the association of rhBMP-7 to thin nanostructure HA-coated implants promoted greater new bone area than the same implants in the absence of rhBMP-7, mainly in cases of over-instrumented implant sites.

RESUMO

A Fibrina Rica em Plaquetas (PRF) é caracterizada por sua abrangente aplicabilidade na Odontologia. Neste sentido, a venopunção é uma etapa fundamental para sua obtenção. Tal procedimento consiste na identificação das veias superficiais, localizadas na região da fossa antecubital dos membros superiores, para que através da utilização do sistema a vácuo de coleta seja obtido o sangue venoso do paciente. O objetivo deste trabalho é realizar um guia prático abordando cada etapa que compreende a coleta sanguínea para produção do PRF permitindo sua reprodutibilidade de forma segura e eficiente.

Platelet Rich Fibrin (PRF) is characterized by its wide applicability in Dentistry. In this sense, venipuncture is a fundamental step towards obtaining it. Such procedure consists of the identification of superficial veins, located in the region of the antecubital fossa of the upper limbs, so that through the use of the vacuum collection system, the patient's venous blood is obtained. The objective of this work is to carry out a practical guide covering each step that comprises the blood collection for the production of the PRF allowing its reproducibility in a safe and efficient way.

Assuntos