RESUMO
The effect of an external electric field on the formation of protein GlnB-Hs films and on its buffer solution on siliconized glass slides has been analyzed by current versus electric field curves and atomic force microscopy (AFM). The Herbaspirillum seropedicae GlnB protein (GlnB-Hs) is a globular, soluble homotrimer (36 kDa) with its 3-D structure previously determined. Concentrations of 10 nM native denatured GlnB-Hs protein were deposited on siliconized glass slides under ambient conditions. Immediately after solution deposition a maximum electric field of 30 kV/m was applied with rates of 3 V/s. The measured currents were surface currents and were analyzed as transport current. Electric current started to flow only after a minimum electric field (critical value) for the systems analyzed. The AFM images showed films with a high degree of directional organization only when the proteins were present in the solution. These results showed that the applied electric field favored directional organization of the protein GlnB-Hs films and may contribute to understand the formation of protein films under applied electric fields.
Assuntos
Proteínas de Bactérias/química , Eletricidade , Herbaspirillum/química , Proteínas PII Reguladoras de Nitrogênio/química , Microscopia de Força Atômica , Silicones/químicaRESUMO
Centrins are calcium-binding proteins associated with microtubules organizing centers. Members of two divergent subfamilies of centrins were found in the aquatic fungus Blastocladiella emersonii, contrasting with the occurrence of only one member known for the better explored terrestrial fungi. BeCen1 shows greatest identity with human centrins HsCen1, HsCen2 and green algae centrin CrCenp, while BeCen3 records largest identity with human centrin HsCen3 and yeast centrin Cdc31p. Following the discovery of this unique feature, BeCen1 and BeCen3 centrins were produced to study whether these proteins had distinct features upon calcium binding. Circular dichroism showed opposite calcium binding effects on the α-helix arrangement of the secondary structure. The spectra indicated a decrease in α-helix signal for holo-BeCen1 contrasting with an increase for holo-BeCen3. In addition, only BeCen1 refolds after being de-natured. The fluorescence emission of the hydrophobic probe ANS increases for both proteins likely due to hydrophobic exposure, however, only BeCen1 presents a clear blue shift when calcium is added. ITC experiments identified four calcium binding sites for both proteins. In contrast to calcium binding to BeCen1, which is mainly endothermic, binding to BeCen3 is mainly exothermic. Light-scattering evidenced the formation of large particles in solution for BeCen1 and BeCen3 at temperatures above 30°C and 40°C, respectively. Atomic force microscopy confirmed the presence of supramolecular structures, which differ in the compactness and branching degree. Binding of calcium leads to different structural changes in BeCen1 and BeCen3 and the thermodynamic characteristics of the interaction also differ.
Assuntos
Blastocladiella/química , Cálcio/química , Proteínas Fúngicas/química , Dobramento de Proteína , Combinação Trimetoprima e Sulfametoxazol/química , Blastocladiella/metabolismo , Cálcio/metabolismo , Dicroísmo Circular , Proteínas Fúngicas/metabolismo , Humanos , Microscopia de Força Atômica , Ligação Proteica , Isoformas de Proteínas/química , Isoformas de Proteínas/metabolismo , Estrutura Secundária de Proteína , Termodinâmica , Combinação Trimetoprima e Sulfametoxazol/metabolismoRESUMO
The adsorption of proteins and its buffer solution on mica surfaces was investigated by atomic force microscopy (AFM). Different salt concentration of the Herbaspirillum seropedicae GlnB protein (GlnB-Hs) solution deposited on mica was investigated. This protein is a globular, soluble homotrimer (36kDa), member of PII-like proteins family involved in signal transducing in prokaryote. Supramolecular structures were formed when this protein was deposited onto bare mica surface. The topographic AFM images of the GlnB-Hs films showed that at high salt concentration the supramolecular structures are spherical-like, instead of the typical doughnut-like shape for low salt concentration. AFM images of NaCl and Tris from the buffer solution showed structures with the same pattern as those observed for high salt protein solution, misleading the image interpretation. XPS experiments showed that GlnB protein film covers the mica surface without chemical reaction.
Assuntos
Silicatos de Alumínio/metabolismo , Proteínas de Bactérias/metabolismo , Herbaspirillum/química , Proteínas PII Reguladoras de Nitrogênio/metabolismo , Adsorção , Proteínas de Bactérias/ultraestrutura , Biofilmes , Herbaspirillum/ultraestrutura , Microscopia de Força Atômica , Proteínas PII Reguladoras de Nitrogênio/ultraestrutura , Soluções , Análise Espectral , Propriedades de SuperfícieRESUMO
Thin polysaccharide films prepared with xyloglucan (XG), a neutral polysaccharide extracted from the seeds of Guibourtia hymenifolia were prepared by spin-coating and drop deposition under pH3, pH5 and pH12, on silicon and mica substrates. Atomic force microscopy (AFM) images show flat nanoporous matrices with additional grain-like structures on both mica and silicon for pH 3 and pH 5. However, X-ray photoelectron spectroscopy (XPS) and Auger spectra of these adsorbed biopolymers prepared under alkaline condition (pH 12) reveal that Na(+) ions from the solution interact with the mica substrate surface and with XG forming chemical bonds. Both XPS and Auger results suggest XG depolymerisation during adsorption, caused by an alkaline ss-base catalyzed degradation mechanism, which is consistent with the more basic character of the mica surface under these conditions. Thus, the polysaccharide diffusion is inhibited during dewetting due to the surface bonding. On the other hand, the interaction of Na(+) in solution with the silicon surface is weaker, favoring its interaction with the polysaccharide, conserving the overall polymer structure of XG and allowing the biopolymer to slip and diffuse during dewetting, forming the final branched fractal structure.