RESUMO

Brewer's spent grain (BSG) is a residue from brewery production, that can be reused as adsorbent of heavy metals like Chromium (Cr). In this study, BSG was used as a biochar for Cr adsorption in batch adsorption experiments. The biochar pyrolysis temperature (500, 600 and 700ºC), pyrolysis time (30, 105 and 180 minutes) and zinc chloride concentration (5, 12.5 and 20%) were evaluated and optimized from a fractional factorial design. An equilibrium adsorption capacity of 78.13 mg.g-1 and a yield of 26.42% were achieved using 700ºC, 30 min, 12.5%. This biochar was applied to the adsorption of Cr in aqueous solution, under different stirring speeds (100, 150 and 200 rpm). The higher agitation speed reduced the adsorption capacity of the coal from 90 to 72 mg.L-1. In addition, the Cr adsorption equilibrium was reached before 100 min. The pseudo-first order model best described the Cr adsorption kinetics. The Redlich-Peterson isothermal model best fitted the experimental data, with the parameter g (close to 1) suggesting Langmuir's assumptions as the most appropriate to describe the adsorption of Cr on the optimized activated carbon.

O bagaço de malte (BM) é um resíduo da produção cervejeira, que pode ser reaproveitado como adsorvente de metais pesados como o Cromo (Cr). Neste estudo, BM foi usado como um biochar para adsorção de Cr em experimentos de adsorção em batelada. O biochar foi avaliado e otimizado a partir de um planejamento fatorial fracionário com as variáveis: temperatura de pirólise (500, 600 e 700ºC), tempo de pirólise (30, 105 e 180 minutos) e concentração de cloreto de zinco (5, 12,5 e 20%). Uma capacidade de adsorção em equilíbrio de 78,13 mg.g-1 e um rendimento de 26,42% foram obtidos usando 700ºC, 30 min, 12,5%. Este biochar foi aplicado na adsorção de Cr em solução aquosa, sob diferentes velocidades de agitação (100, 150 e 200 rpm). Maior velocidade de agitação reduziu a capacidade de adsorção do biochar de 90 para 72 mg.L-1. Além disso, o equilíbrio de adsorção de Cr foi alcançado antes de 100 min. O modelo de pseudo-primeira ordem melhor descreveu a cinética de adsorção de Cr. O modelo isotérmico de Redlich-Peterson foi o que melhor se ajustou aos dados experimentais, com o parâmetro g (próximo de 1) sugerindo as hipóteses de Langmuir como as mais apropriadas para descrever a adsorção de Cr no carvão ativado otimizado.

Assuntos

RESUMO

This study aimed to evaluate the feasibility of the production of sustainable and biodegradable packages made from a little-explored by product of wheat-milling, the glue flour (GF). Films were produced by the casting method and the effect of the incorporation of glycerol, sorbitol, and GF in the properties of the films was investigated following the central composite rotational design (CCRD) approach. The results have been statistically analyzed by the response surface methodology and the desirability function. Due to the rich composition in amylaceous reserve (64.81%; 26% of amylose content), considerable protein content (11.23%), and fibers (8.28%), the GF proved to be suitable for use as a matrix in biopolymer films. All the properties were mainly influenced by the plasticizer type and GF concentration. Film plasticized with glycerol (run 13) was more flexible, had higher moisture (28.39%) content, and was more adhesive than the formulation made with sorbitol (run 11). Film elongation (ELO) ranged from 25.84% to 56.71%, and tensile strength (TS) from 0.10 to 2.8 MPa. The optimized process conditions were 8% for Cf, 0% for Cg, and 4% for Cs. Under these conditions, the films presented low moisture (12.1%), moderate solubility (35.5%) and TS (1.64 MPa), and high ELO (72.06%). This study showed that GF is a promising source for the development of biodegradable films. PRACTICAL APPLICATION: Films made from a by product of wheat flour (glue flour) have technological potential to be used as packaging for food products. The valorization of a by product of the agribusiness without pre-treatment for the production of biodegradable films was made possible. The study by casting technique is a previous for scale-up production.

Assuntos

RESUMO

Films were produced using the blown extrusion method from blends made with cassava and pinhão thermoplastic starch, compostable polyester (poly(butylene adipate co-terephthalate, PBAT) and natural extracts (rosemary and green tea). The effect of the incorporation of the extracts and the type of starch added in the film properties were investigated following the mixture design (23 ) approach. Regression models and response surface curves were generated to predict the film properties. The effect of the cold storage (6 °C and 17% of humidity relative, for 60 days) on the film properties was also investigated in order to simulate future applications. All the properties were mainly influenced by the extract type. The incorporation of the extracts decreased the lightness parameter and the films produced with green tea extract were more opaque than those made with rosemary. Starch/rosemary blends were more flexible, while the extract type did not have a significant effect on tensile strength (TS). Film elongation (ELO) ranged from 520% to 719% and might be comparable to some synthetic polymers. The water vapor permeability was improved in approximately 14% with addition of the extracts. The storage conditions, on the one hand, increased the TS, elastic modulus, and opacity of films and, on the other hand, decreased the elongation parameter. The thermal stability of films was not modified by adding extracts or varying the starch type. The results demonstrated that pinhão/cassava/PBAT blends and the natural extracts are a good alternative matrix to produce packagings with adequate mechanical and barrier properties. PRACTICAL APPLICATION: Extruded films produced from cassava or pinhão starch, poly(butylene adipate co-terephthalate) (PBAT) and natural extracts show technological potential to be used as active packaging for food products. Pinhão starch is a great alternative substitute to cassava starch and the incorporation of the commercial compostable polymer (PBAT) is necessary in order to confer suitable mechanical properties to extrusion process. The extrusion blown method, a process widely used by plastic industries, allows the scale-up of bio-based packagings for industrial scale.

Assuntos

RESUMO

Juçara fruit pomace is one of the most abundant byproducts of the pulp-making process, generally discarded despite their attractive nutritional content. In this sense, this study aimed to investigate the potential of juçara fruit pomace as an alternative source of starch and natural dyes. Starch extracted from juçara seed (JS) was characterized in approximate composition, crystallinity, thermal profile, morphology, and equilibrium moisture data. Total phenolic content, anthocyanins content, and in vitro antioxidant capacity were assessed for the juçara seedless pomace (JSP). JSP is rich in monomeric anthocyanins (7.19 to 7.23 mg cyanidin 3-O-glycoside/g dry matter [dm]), presents high antioxidant potential, elevated dietary fibers (72.7% dm), considerable amount of lipids (12.8% dm), low protein content, and ash traces. JS is a rich carbon source (76.91% fibers [dm]; 12.21% amylaceous reserve). Being high in carbohydrates, mainly starch, it can be classified as high starch content flour (juçara seed starch-flour [JSS-F]). JSS-F presented B-type crystallinity and conventional starch-like thermal stability. JSS-F exhibited type III sorption isotherm behavior and the Gugghenheim-Anderson-DeBoer model adequately represented the moisture equilibrium data. As a nutritive source of bioactive compounds and starch, juçara pomace should be regarded as a coproduct to be explored as an alternative natural ingredient to food, pharmaceutical, and chemical industries. PRACTICAL APPLICATION: Juçara agroindustrial residues (pomace and seeds) are a promising source of antioxidants and unconventional starch, which are usually discarded after depulping, representing approximately 74% of the fruits. Juçara pomace can be used to produce flour with marketing potential due to their functional properties and nutritional value. This flour can be incorporated directly into formulations or be used in extraction processes to obtain components of interest, for example, anthocyanins, to be used as a natural food dye. Starch can be extracted from juçara seeds, presenting adequate technological properties for partial replacement of conventional starches.

Assuntos