RESUMO
This research pioneers the application of microwave irradiation as an innovative strategy for one-pot synthesis and surfactant elimination (cetyltrimethylammonium bromide-CTAB) from MCM-41, introducing a rapid and efficient methodology. MCM-41 silica is widely utilized in various applications due to its unique textural and structural properties. Nonetheless, the presence of residual surfactants after synthesis poses a challenge to its effective application. MCM-41 synthesis, conducted in a microwave reactor at 60 °C, provided a result within 0.5 to 1 h. Comprehensive analyses of structural, chemical, morphological, and surface characteristics were undertaken, with a focus on the impact of synthesis time on these properties. Surfactant extraction involved the use of ethanol as a solvent at 120 °C for 6 min within the microwave reactor. The acquired particles, coupled with the properties of textural and structural features, affirmed the efficacy of the synthesis process, resulting in the synthesis of MCM-41 within 36 min. This study presents the first instance of one-pot synthesis and surfactant removal from MCM-41 using a microwave reactor. The proposed method not only addresses the surfactant removal challenge, but also substantially accelerates the synthesis process, thereby enhancing the potential for MCM-41's application in diverse fields.
RESUMO
The global demand for energy and industrial growth has generated an exponential use of fossil fuels in recent years. It is well known that carbon dioxide (CO2) is mainly produced, but not only from fuels, which has a negative impact on the environment, such as the increasing emission of greenhouse gases. Thus, thinking about reducing this problem, this study analyzes microwave irradiation as an alternative to conventional heating to optimize zeolite A synthesis conditions for CO2 capture. Synthesis reaction parameters such as different temperatures (60-150 °C) and different time durations (1-6 h) were evaluated. The CO2 adsorption capacity was evaluated by CO2 adsorption-desorption isotherms at 25 °C and atmospheric pressure. The results showed that the synthesis of zeolite A by microwave irradiation was successfully obtained from natural kaolinite (via metakaolinization), reducing both temperature and time. Adsorption isotherms show that the most promising adsorbent for CO2 capture is a zeolite synthesized at 100 °C for 4 h, which reached an adsorption capacity of 2.2 mmol/g.
Assuntos
Dióxido de Carbono , Zeolitas , Adsorção , Micro-Ondas , Pressão AtmosféricaRESUMO
Typical porous silica (SBA-15) has been modified with pore expander agent (1,3,5-trimethylbenzene) and fluoride-species to diminish the length of the channels to obtain materials with different textural properties, varying the Si/Zr molar ratio between 20 and 5. These porous materials were characterized by X-ray Diffraction (XRD), N2 adsorption/desorption isotherms at -196 °C and X-ray Photoelectron Spectroscopy (XPS), obtaining adsorbent with a surface area between 420-337 m2 g-1 and an average pore diameter with a maximum between 20-25 nm. These materials were studied in the adsorption of human blood serum proteins (human serum albumin-HSA and immunoglobulin G-IgG). Generally, the incorporation of small proportions was favorable for proteins adsorption. The adsorption data revealed that the maximum adsorption capacity was reached close to the pI. The batch purification experiments in binary human serum solutions showed that Si sample has considerable adsorption for IgG while HSA adsorption is relatively low, so it is possible its separation.
Assuntos
Albumina Sérica/química , Soroglobulinas/química , Dióxido de Silício/química , Adsorção , Humanos , PorosidadeRESUMO
The adsorption of human immunoglobulin G (IgG) and human serum albumin (HSA) on a non-calcined Mg-Al layered double hydroxide (3:1 Mg-Al LDH) was studied in batch and fixed bed experiments, focusing on the effect of buffer solution and pH over sorbent uptake. Mg-Al LDH was synthesized and characterized by X-ray diffraction (XRD), N2 adsorption-desorption isotherms at -196°C, X-ray photoelectron spectroscopy (XPS), Zero point charge (pHzpc), particle size distribution and Fourier transform infra-red (FTIR). Batch adsorption experiments were performed in order to investigate the effects of pH on IgG and HSA adsorption with different buffers: sodium acetate (ACETATE), sodium phosphate (PHOSPHATE), 3-(N-morpholino) propanesulfonic acid (MOPS), 4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES) and trizma-hydrochloric acid (TRIS-HCl). Maximum adsorption capacities estimated by the Langmuir model were 239mgg-1 for IgG and 105mgg-1 for HSA in TRIS-HCl buffer. On the other hand, the highest selectivity for IgG adsorption over HSA was obtained with buffer PHOSPHATE (pH 6.5). The maximum IgG and HSA adsorption uptake in this case were 165 and 36mgg-1, respectively. Fixed bed experiments were carried out with both proteins using PHOSPHATE buffer (pH 6.5), which confirmed that IgG was more selectively adsorbed than HSA on Mg-Al LDH and both could be fully recovered by elution with sodium chloride (NaCl).