Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros











Intervalo de ano de publicação
1.
Odovtos (En linea) ; 25(1)abr. 2023.
Artigo em Inglês | LILACS, SaludCR | ID: biblio-1422185

RESUMO

Dentists have a high risk of contracting COVID-19, they needed to be aware of the major challenge that represents the dental practice and COVID-19. Accordingly, this study aimed: 1) to investigate the knowledge of dentists regarding COVID-19, 2) to investigate the attitudes of dentists concerning the use of personal protective equipment and, 3) to investigate the attitudes of dentists on stopping their dental practices in the framework of a contingency plan for the COVID-19 outbreak. An online cross-sectional survey was applied to dentists (n=822). Dentists in Mexico answered the survey, which was administered before the contingency plan for the COVID-19 outbreak. Results were analyzed with descriptive statistics and with a Chi-square test (P≤0.05). Of the respondents, 99% of dentists indicated knowing what COVID-19 is, knowing most, but not all, of its signs and symptoms and knowing its mode of transmission. The 89% of dentists indicated that they always used personal protective equipment. But they did not use always wear face masks, protective eyewear, face shields, disposable gowns, and caps. Dentists were aware of the risk of performing dental procedures during the COVID-19 outbreak. The 90% of dentists indicated that they would treat only patients requiring emergency treatment, and 10% indicated that they would not treat any patients. The dentists had limited knowledge about the COVID-19 disease. They did not use personal protective equipment consistently, and they indicated that they might continue working during the COVID-19 outbreak.


Durante la pandemia por COVID-19, los dentistas han tenido un alto riesgo de contraer COVID-19. Los dentistas mexicanos tuvieron la necesidad de enfrentarse a la COVID-19 en la práctica dental con un posible conocimiento limitado sobre la enfermedad. De acuerdo con esa problemática, los objetivos de este estudio fueron: 1) investigar el conocimiento de los dentistas sobre la COVID-19, 2) investigar las actitudes de los dentistas sobre el uso de equipo de protección personal, 3) investigar las actitudes de los dentistas para detener la práctica laboral frente a la pandemia. Una encuesta fue aplicada a dentistas mexicanos en el inicio de la contingencia por COVID-19 (n=822). Se analizaron los resultados de con una prueba de Chi cuadrada (P≤0.05). El 99% de los participantes conocieron qué es la COVID-19, pero no todos los signos y síntomas de la enfermedad ni los modos de transmisión. El 89% de los dentistas indicaron que siempre usan equipo de protección personal. Pero no usan siempre careta, lentes de protección, cubreboca, guantes deshechables y gorro. Los participantes tenían conocimiento del riesgo de contraer COVID-19. El 90% indicó que sólo atenderían urgencias dentales y el resto indicó que no atendería pacientes. Los dentistas tuvieron un conocimiento limitado sobre la COVID-19. No usaron equipo de protección personal de forma consistente. Además indicaron que estarían dispuestos a seguir trabajando durante la pandemia.


Assuntos
Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Idoso , Odontólogos/psicologia , Equipamento de Proteção Individual , COVID-19 , México
2.
Eur J Dent Educ ; 27(3): 679-687, 2023 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-36201359

RESUMO

INTRODUCTION: A simulation model improves the learning of dental anaesthesia in dental students. This study explored first, the making at home of a dental anaesthesia simulation model by dental students, and second, the impact of that simulation model on the learning of dental students following an online course. We compared the level of knowledge, the level of perception of confidence to perform the basic injection technique (BIT) of dental anaesthesia, and the level of attitude towards e-learning of the BIT between a group of dental students who had an online course with a home-made dental anaesthesia simulation model (HMDASM) and a group of dental students who did not use that model. MATERIALS AND METHODS: A group of participants (n = 28) used the HMDASM to learn the BIT with an e-learning course. Another group of participants (n = 28) followed the same e-learning course, but that group used a lemon to practise the BIT. The two groups answered questionnaires that explored the level of theoretical knowledge on the BIT, the level of perception of confidence to perform the BIT, and the level of attitude towards e-learning of the BIT. Questionnaire scores from each group were compared by a Student's t-test (p ≤ .05). RESULTS: The group that used the HMDASM had a level of knowledge similar to that of the other group (p > .05). The group that used the HMDASM had a level of perception of confidence to perform the BIT and a level of attitude towards online learning of the BIT higher than those of the group that did not use the simulation model (p < .05). CONCLUSION: The use of a HMDASM had a positive effect on dental students following an online course to learn the BIT.


Assuntos
Anestesia Dentária , Instrução por Computador , Humanos , Educação em Odontologia/métodos , Aprendizagem , Atitude
3.
J Mater Sci Mater Med ; 32(5): 56, 2021 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-33961138

RESUMO

The local administration of analgesic combinations by means of degradable polymeric drug delivery systems is an alternative for the management of postoperative pain. We formulated a Tramadol-Dexketoprofen combination (TDC) loaded in poly(vinyl alcohol) (PVA) film. Films were prepared by the solvent casting method using three different molecular weights of PVA and crosslinking those films with citric acid, with the objective of controlling the drug release rate, which was evaluated by UV-vis spectrometry. Non-crosslinked PVA films were also evaluated in the experiments. Differential scanning calorimetry (DSC) analysis of samples corroborated the crosslinking of PVA by the citric acid. Blank and loaded PVA films were tested in vitro for its impact on blood coagulation prothrombin time (PT) and partial thromboplastin time (PTT). The swelling capacity was also evaluated. Crosslinked PVA films of higher-molecular weight showed a prolonged release rate compared with that of the lower-molecular-weight films tested. Non-crosslinked PVA films released 11-14% of TDC. Crosslinked PVA films released 80% of the TDC loaded (p < 0.05). This suggests that crosslinking films can modify the drug release rate. The blank and loaded PVA films induced PT and PTT in the normal range. The results showed that the polymeric films evaluated here have the appropriate properties to allow films to be placed directly on surgical wounds and have the capacity for controlled drug release to promote local analgesia for the control of postoperative pain.


Assuntos
Analgésicos Opioides/química , Anti-Inflamatórios não Esteroides/química , Sistemas de Liberação de Medicamentos , Cetoprofeno/química , Álcool de Polivinil , Tramadol/química , Adulto , Analgésicos Opioides/administração & dosagem , Anti-Inflamatórios não Esteroides/administração & dosagem , Preparações de Ação Retardada , Combinação de Medicamentos , Liberação Controlada de Fármacos , Humanos , Cetoprofeno/administração & dosagem , Masculino , Membranas Artificiais , Tempo de Tromboplastina Parcial , Tempo de Protrombina , Espectroscopia de Infravermelho com Transformada de Fourier , Tramadol/administração & dosagem
4.
Odontology ; 107(2): 223-230, 2019 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-30229345

RESUMO

We explored chitosan-based sustained release pastes for apexification. The study aimed to formulate chitosan-based pastes loaded with calcium hydroxide (CH) or with calcium chloride (CC), and to evaluate the sustained release of Ca2+ and pH changes in deionized water as well as the effect of the pastes on cell viability. The pastes were formulated by dissolution of the chitosan in 1% or 2% acetic acid (AAC) plus the addition of CH or CC, then were suspended in deionized water for 50 days; the released Ca(II) and pH were measured with an electrode probe. The effect of the pastes on viability of human dental pulp cells was evaluated with a MTS assay. The results showed that the pastes prepared with 1% and 2% AAC and loaded with CH released a 74.9% and a 76.1% of the Ca2+ content, respectively, while the pastes prepared with 1% and 2% AAC loaded with CC released a content of Ca2+ of 90.8% and 76.6%, respectively. A control paste (CH and polyethylene glycol) released a 95.4%; significant statistical differences were found between the percentage of the experimental pastes and the control. The CH-loaded pastes caused an alkaline pH at the starting of the study, but the pH became neutral at the ending. The pH of the CC-loaded pastes was neutral at the starting and was acid at the ending. The pastes no affected on the cell viability. The chitosan-based pastes showed a suitable sustained release profile and cytocompatibility.


Assuntos
Apexificação , Quitosana , Cálcio , Sobrevivência Celular , Preparações de Ação Retardada , Humanos , Concentração de Íons de Hidrogênio
5.
Odontology ; 104(3): 318-23, 2016 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-26175086

RESUMO

Calcium hydroxide (CH) loaded poly(DL-lactide-co-glycolide) acid (PLGA) microspheres (MS) might be used for apexification requiring a sustained release of Ca(2+). The aim of this study was to formulate and characterize CH-PLGA-MS. The CH-loaded MS were prepared by either oil-in-water (O/W) or water-in-oil/in-water (W/O/W) emulsion solvent evaporation technique. MS produced by the O/W technique exhibited a larger diameter (18.63 ± 7.23 µm) than the MS produced by the W/O/W technique (15.25 ± 7.37 µm) (Mann-Whitney U test P < 0.001). The CH encapsulation efficiency (E e) and Ca(2+) release were calculated from data obtained by absorption techniques. Ca(2+) release profile was evaluated for 30 days. To know the E e, the CH-loaded MS were dissolved in 1 M NaOH to release all its content and a Ca(2+) colorimetric marker was added to this solution. The reagent marked the Ca(2+) in blue color, which was then measured by a UV-Vis system (650 nm). The percentage of E e was calculated on the basis of the theoretical loading. The E e of the O/W-produced MS was higher (24 %) than the corresponding percentage of the W/O/W-produced MS (11 %). O/W- and W/O/W-produced MS released slower and lower Ca(2+) than a control CH paste with polyethylene glycol 400 (Kruskal-Wallis test). O/W-produced MS released higher Ca(2+) than W/O/W-produced MS (statistically significant differences; P < 0.05). In conclusion, the CH-PLGA-MS were successfully formulated; the technique of formulation influenced the size, encapsulation efficiency and release profile. The MS were better sustained release system than the CH paste.


Assuntos
Apexificação , Materiais Biocompatíveis/química , Hidróxido de Cálcio/química , Ácido Láctico/química , Ácido Poliglicólico/química , Preparações de Ação Retardada , Microscopia Eletrônica de Varredura , Microesferas , Tamanho da Partícula , Copolímero de Ácido Poliláctico e Ácido Poliglicólico
6.
Rev. ADM ; 72(4): 178-183, jul.-ago. 2015.
Artigo em Espanhol | LILACS | ID: lil-775316

RESUMO

La publicación de artículos científicos en odontología constituye la forma más apropiada para que un investigador dé a conocer los resultados de su trabajo; este reporte escrito representa la culminación del proceso de un estudio y resume los aspectos más relevantes del trabajo realizado –como son las características de los pacientes incluidos, el diseño empleado para dar respuesta a la pregunta planteada inicialmente, los materiales o procedimientos utilizados, los resultados y conclusiones emanados del estudio– en una forma coherente y estructurada. El propósito del presente artículo es dar a conocer algunos elementos de la definición de la publicación científica, la importancia de publicar en revistas de reconocido prestigio, el proceso de la publicación, la estructura de un artículo científico y los principales lineamientos para la publicación.


In dentistry, publishing scientific papers is the most effective way for researchers to disseminate the results of their work; these written reports represent the culmination of the research process and provide a summary of the most relevant aspects of the work carried out, such as the characteristics of the patients included, the design used to find the answer to the initial question, the materials or procedures used, and the results and conclusions of the study, all presented in a cohe­rent and structured manner. The purpose of this article is to examine the definition of scientific publication in dentistry, the importance of publishing in prestigious journals, the publication process, the structure of a scientific article, and the main guidelines for publication.


Assuntos
Bioética , Pesquisa em Odontologia , Publicação Periódica , Políticas Editoriais , Ética Odontológica
7.
RSBO (Impr.) ; 6(1)20/03/2009.
Artigo em Português | LILACS | ID: lil-509361

RESUMO

Introduction and Objective: A case of external root resorption associated to an Odontogenic Keratocyst is presented. Case Report and Conclusion: A review of the literature revealed that this cyst is not considered a common etiological factor for external root resorption. A X-ray examination showed root resorption in the teeth involved in an odontogenic keratocyst. Root canal treatment with calcium hydroxide mixed with propylenglicol was performed. The paste was applied at definite intervals during a 10 month period. X-rays were taken at each interval. At final X-rays examination there were no signs of root resorption and the filling was completed.


Introdução e Objetivo: O presente trabalho apresenta um caso de reabsorção externa associada a um Queratocisto Odontogênico. Relato do caso e Conclusão: A revisão da literatura pertinente revelou que tal cisto não é comumente associado à reabsorção externa da raiz. Exames radiográficos apresentaram reabsorção externa da raiz nos dentes envolvidos com a lesão cística.O tratamento endodôntico instituído utilizou hidróxido de cálcio associado ao propilenoglicol aplicado como medicação intra-canal em intervalos definidos durante 10 meses. Ao final do referido período o exame radiográfico demonstrou o reparo da reabsorção.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA