RESUMO

The components and the salivary flow have a direct influence on the composition of the oral microbiota of children and young people with oropharyngeal dysphagia, and studies have already demonstrated the excessive accumulation of supragingival dental calculus in individuals with enteral nutrition. This study aimed to compare the oral hygiene, biochemical, and microbiological aspects of the oral cavity of children and young people with neurological impairment and oropharyngeal dysphagia. Forty children and young people with neurological impairment and oropharyngeal dysphagia were enrolled and divided into two groups: group I, encompassing 20 participants fed via gastrostomy; and group II, encompassing 20 participants fed via the oral route. Oral hygiene and salivary pH and flow were assessed, and a polymerase chain reaction was performed to evaluate the messenger RNA expressions of Porphyromonas gingivalis, Tanerella forsythia, and Treponema denticola. In groups I and II, the mean Oral Hygiene Index-Simplified scores were 4 and 2, respectively, showing a significant difference; the mean Calculus Index scores were 2 and 0, respectively, showing a significant difference; and the mean pH was 7.5 and 6.0, respectively, showing a significant difference. Bacterial analysis indicated no association between the two groups. It can be concluded that children and young people who use gastrostomy had a poorer oral hygiene, greater dental calculus deposition, and higher salivary pH. The saliva of patients in both groups contained Porphyromonas gingivalis, Tanerella forsythia, and Treponema denticola.

RESUMO

This study investigated the isolated and combined effect of a single application of TiF4 or NaF varnish versus daily use of a solution containing a low concentration of TiF4/NaF against tooth erosion in vitro. A total of 90 bovine enamel and 108 root dentin samples were treated as follows: control (no treatment), solution containing TiF4/NaF (500 ppm F-, pH 4.4), NaF varnish (24,500 ppm F-, pH 5.0), TiF4 varnish (24,500 ppm F-, pH 1.0), TiF4 varnish + solution, and NaF varnish + solution. The erosive challenges were performed 4 × 90s/day (0.1% citric acid, pH 2.5) and, between them, the samples were immersed in artificial saliva. The tooth loss was measured using contact profilometry (after 7 days for dentin and after 7, 10, and 14 days for enamel). All treatments were effective in reducing tooth loss, except NaF varnish for enamel on day 7 (p < 0.0001). TiF4/NaF solution and TiF4 varnish did not differ with respect to enamel loss for 10 days; thereafter, TiF4 varnish lost its protective effect compared to TiF4/NaF solution. The combination of vehicles was more effective in reducing enamel loss than both varnishes on their own but not compared to the solution. For dentin, TiF4 varnish was more effective than NaF varnish, while TiF4/NaF solution and NaF varnish were similar. The combination of vehicles improved the protective effect only when compared to NaF varnish on its own (p < 0.0001). Both types of TiF4 applications, isolated or combined, were effective against tooth erosion, but some differences in their performance were seen between enamel and dentin.

Assuntos

RESUMO

BACKGROUND: Artificial lesions produced by different protocols might directly influence the response to different remineralising treatments. This study compared the response of different artificial caries-like enamel lesions to home-care and professional fluoride based-remineralising treatments in situ. METHODS: The tested demineralising protocols were methylcellulose- MC gel, polyacrylic acid - PA gel, tetraethyl methylene diphosphanate - TEMDP solution, and acetate- Buffer solution. The lesions were remineralised using an in situ model, following a crossover and double blind design. Twelve subjects wore intra-oral appliances during 3 phases (3 d each): control (C) (saliva); home-care F(-) treatment (FD) (1,100 ppm F(-) dentifrice, 2x1 min/day); and professional (FVD) (22,600 ppm F(-) varnish) plus FD. The de-remineralisation was measured by transverse microradiography-TMR and hardness (surface hardness/cross-sectional hardness, SH/CSH, respectively). RESULTS: For SH, lesions produced by PA gel were the only one showing significant differences among the remineralising treatments (C x FD x FVD); while the TEMDP lesion were not responsive to any fluoride treatment (for both SH/CSH). For TMR, there were no differences among the remineralising treatments, regardless of the type of lesion. Generally, the most responsive lesions to fluoride were the less demineralised lesions (considering hardness: PA gel and Buffer). CONCLUSIONS: The type of lesion has influence on the surface remineralisation degree induced by home-care and professional fluoride treatments using this in situ model.

Assuntos

RESUMO

OBJECTIVE: This study assessed the effect of fluoride varnishes on the progression of tooth erosion in vitro. MATERIAL AND METHODS: Forty-eight enamel and 60 root dentin samples were previously demineralized (0.1% citric acid, pH 2.5, 30 min), leading to a baseline and erosive wear of 12.9 and 11.4 µm, respectively. The samples were randomly treated (6 h) with a 4% TiF4 varnish (2.45%F-, pH 1.0), a 5.42% NaF varnish (2.45%F-, pH 5.0), a placebo varnish and no varnish (control). The samples were then subjected to erosive pH cycles (4x90 s/day in 0.1% citric acid, intercalated with artificial saliva) for 5 days. The increment of the erosive tooth wear was calculated. In the case of dentin, this final measurement was done with and without the demineralized organic matrix (DOM). Enamel and dentin data were analyzed using ANOVA/Tukey's and Kruskal-Wallis/Dunn tests, respectively (p<0.05). RESULTS: The TiF4 (mean±s.d: 1.5±1.1 µm) and NaF (2.1±1.7 µm) varnishes significantly reduced enamel wear progression compared to the placebo varnish (3.9±1.1 µm) and control (4.5±0.9 µm). The same differences were found for dentin in the presence and absence of the DOM, respectively: TiF4 (average: 0.97/1.87 µm), NaF (1.03/2.13 µm), placebo varnish (3.53/4.47 µm) and control (3.53/4.36 µm). CONCLUSION: The TiF4 and NaF varnishes were equally effective in reducing the progression of tooth erosion in vitro.

Assuntos

RESUMO

Objective This study assessed the effect of fluoride varnishes on the progression of tooth erosion in vitro. Material and Methods: Forty-eight enamel and 60 root dentin samples were previously demineralized (0.1% citric acid, pH 2.5, 30 min), leading to a baseline and erosive wear of 12.9 and 11.4 µm, respectively. The samples were randomly treated (6 h) with a 4% TiF4 varnish (2.45%F-, pH 1.0), a 5.42% NaF varnish (2.45%F-, pH 5.0), a placebo varnish and no varnish (control). The samples were then subjected to erosive pH cycles (4x90 s/day in 0.1% citric acid, intercalated with artificial saliva) for 5 days. The increment of the erosive tooth wear was calculated. In the case of dentin, this final measurement was done with and without the demineralized organic matrix (DOM). Enamel and dentin data were analyzed using ANOVA/Tukey’s and Kruskal-Wallis/Dunn tests, respectively (p<0.05). Results The TiF4 (mean±s.d: 1.5±1.1 µm) and NaF (2.1±1.7 µm) varnishes significantly reduced enamel wear progression compared to the placebo varnish (3.9±1.1 µm) and control (4.5±0.9 µm). The same differences were found for dentin in the presence and absence of the DOM, respectively: TiF4 (average: 0.97/1.87 µm), NaF (1.03/2.13 µm), placebo varnish (3.53/4.47 µm) and control (3.53/4.36 µm). Conclusion The TiF4 and NaF varnishes were equally effective in reducing the progression of tooth erosion in vitro. .

Assuntos

RESUMO

Este estudo teve como o objetivo avaliar in vitro o efeito do tratamento com vernizes de tetrafluoreto de titânio (TiF4) e fluoreto de sódio (NaF) (ambos com 0,95%, 1,95% e 2,45% F) sobre 1) a quantidade de F- liberada em água deionizada e saliva artificial, por período de 12h; 2) os tipos de compostos formados pela interação com a hidroxiapatita (neste caso, com soluções ao invés dos vernizes); 3) a porcentagem de elementos presentes na superfície do esmalte bovino e humano, hígidos (H) e desmineralizados (DES); 4) a quantidade de CaF2 sobre a superfície do esmalte bovino e humano, H e DES. Adicionalmente, 5) o efeito dos vernizes de TiF4 e NaF sobre a remineralização do esmalte bovino, em diferentes condições in situ, foi avaliado. Para etapa 1, a liberação de F- foi quantificada por eletrodo de íon específico. Na etapa 2, pó de HAP produzido por precipitação foi tratado com soluções fluoretadas. Os compostos formados foram avaliados por espectroscopia de infravermelho e difração de raios-X. Nas etapas 3 e 4, as superfícies tratadas com os vernizes foram analisadas por MEV- EDAX e por biópsias básicas, respectivamente. Vinte voluntários (n final=17) participaram do ensaio in situ com 3 fases cruzadas, os quais utilizaram aparelhos palatinos contendo amostras de esmalte bovino desmineralizadas tratadas com vernizes de TiF4, NaF ou placebo. As amostras foram submetidas a diferentes condições de des-remineralização (presença ou não de tela plástica; variação da frequência de aplicação de sacarose 20%) e à exposição ao dentifrício fluoretado. O volume mineral e profundidade da lesão foram avaliados por microradiografia transversal (TMR). 1) Os vernizes de TiF4 (1,95 e 2,45% F) liberaram mais fluoreto comparados aos vernizes de NaF tanto em água como em saliva artificial, sendo a diferença significativa nas primeiras 6h de contato (p<0,0001). 2) O TiF4 causou alteração na estrutura da HAP e induziu à formação de novos compostos como TiO2 e Ti (HPO4)2. 3)...

This study aimed to evaluate the in vitro effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) varnishes (both with 0.95%, 1.95%, 2.45% F) treatment on the 1) F- release in deionized water and artificial saliva for 12h period; 2) types of compounds formed by the interaction with hydroxyapatite (in this case, solutions were tested instead of varnishes); 3) percentage of the elements on bovine and human, sound (S) and demineralized (DE), enamel surface; 4) F- uptake (CaF2 deposition) on human and bovine, S and DE, enamel surface. Additionally, 5) the effect of TiF4 and NaF varnishes on bovine enamel remineralization, in different in situ conditions, was assessed. In study 1, the F- release was measured by ion specific electrode. In study 2, HAP powder, produced by precipitation, was treated with fluoride solutions. The compounds formed were evaluated by infrared spectroscopy and X-ray diffraction. In studies 3 and 4, the surfaces treated with the varnishes were analyzed by SEM-EDAX and basic biopsies, respectively. Twenty volunteers (final n=17) participated of the in situ study with 3 crossover phases, in which they wore palatal appliances containing bovine demineralized enamel samples treated with TiF4, NaF or placebo varnishes. The samples were subjected to different de-remineralization conditions (presence or absence of plastic mesh and variation in frequency of application of 20% sucrose) and exposure to fluoride dentifrice. Themineral content and lesion depth were evaluated by transverse microradiography (TMR). 1) The TiF4 varnishes (1.95 and 2.45% F) released more F- compared to NaF varnishes in both water and artificial saliva, and significant difference was found in the first 6h (p<0.0001). 2) The TiF4 caused change in the HAP structure and induced the formation of new compounds such as TiO2 and Ti (HPO4)2. 3) The TiF4 varnishes induced the formation of a coating layer rich in Ti and F, with microcracks in its extension, on the enamel...

Assuntos

RESUMO

Este estudo teve como o objetivo avaliar in vitro o efeito do tratamento com vernizes de tetrafluoreto de titânio (TiF4) e fluoreto de sódio (NaF) (ambos com 0,95%, 1,95% e 2,45% F) sobre 1) a quantidade de F- liberada em água deionizada e saliva artificial, por período de 12h; 2) os tipos de compostos formados pela interação com a hidroxiapatita (neste caso, com soluções ao invés dos vernizes); 3) a porcentagem de elementos presentes na superfície do esmalte bovino e humano, hígidos (H) e desmineralizados (DES); 4) a quantidade de CaF2 sobre a superfície do esmalte bovino e humano, H e DES. Adicionalmente, 5) o efeito dos vernizes de TiF4 e NaF sobre a remineralização do esmalte bovino, em diferentes condições in situ, foi avaliado. Para etapa 1, a liberação de F- foi quantificada por eletrodo de íon específico. Na etapa 2, pó de HAP produzido por precipitação foi tratado com soluções fluoretadas. Os compostos formados foram avaliados por espectroscopia de infravermelho e difração de raios-X. Nas etapas 3 e 4, as superfícies tratadas com os vernizes foram analisadas por MEV- EDAX e por biópsias básicas, respectivamente. Vinte voluntários (n final=17) participaram do ensaio in situ com 3 fases cruzadas, os quais utilizaram aparelhos palatinos contendo amostras de esmalte bovino desmineralizadas tratadas com vernizes de TiF4, NaF ou placebo. As amostras foram submetidas a diferentes condições de des-remineralização (presença ou não de tela plástica; variação da frequência de aplicação de sacarose 20%) e à exposição ao dentifrício fluoretado. O volume mineral e profundidade da lesão foram avaliados por microradiografia transversal (TMR). 1) Os vernizes de TiF4 (1,95 e 2,45% F) liberaram mais fluoreto comparados aos vernizes de NaF tanto em água como em saliva artificial, sendo a diferença significativa nas primeiras 6h de contato (p<0,0001). 2) O TiF4 causou alteração na estrutura da HAP e induziu à formação de novos compostos como TiO2 e Ti (HPO4)2. 3)...

This study aimed to evaluate the in vitro effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) varnishes (both with 0.95%, 1.95%, 2.45% F) treatment on the 1) F- release in deionized water and artificial saliva for 12h period; 2) types of compounds formed by the interaction with hydroxyapatite (in this case, solutions were tested instead of varnishes); 3) percentage of the elements on bovine and human, sound (S) and demineralized (DE), enamel surface; 4) F- uptake (CaF2 deposition) on human and bovine, S and DE, enamel surface. Additionally, 5) the effect of TiF4 and NaF varnishes on bovine enamel remineralization, in different in situ conditions, was assessed. In study 1, the F- release was measured by ion specific electrode. In study 2, HAP powder, produced by precipitation, was treated with fluoride solutions. The compounds formed were evaluated by infrared spectroscopy and X-ray diffraction. In studies 3 and 4, the surfaces treated with the varnishes were analyzed by SEM-EDAX and basic biopsies, respectively. Twenty volunteers (final n=17) participated of the in situ study with 3 crossover phases, in which they wore palatal appliances containing bovine demineralized enamel samples treated with TiF4, NaF or placebo varnishes. The samples were subjected to different de-remineralization conditions (presence or absence of plastic mesh and variation in frequency of application of 20% sucrose) and exposure to fluoride dentifrice. Themineral content and lesion depth were evaluated by transverse microradiography (TMR). 1) The TiF4 varnishes (1.95 and 2.45% F) released more F- compared to NaF varnishes in both water and artificial saliva, and significant difference was found in the first 6h (p<0.0001). 2) The TiF4 caused change in the HAP structure and induced the formation of new compounds such as TiO2 and Ti (HPO4)2. 3) The TiF4 varnishes induced the formation of a coating layer rich in Ti and F, with microcracks in its extension, on the enamel...

Assuntos

RESUMO

Este estudo avaliou o potencial de uma formulação experimental à base de HAP e fluoreto de sódio, para reduzir a desmineralização da dentina bovina in vitro. Oitenta e quatro amostras de dentina radicular bovina foram divididas em 7 grupos de 12 amostras, sendo submetidas a um dos seguintes tratamentos: 1) pasta Nanop plus [HAP a 20% + 9.000 ppm F, NaF); 2) pasta Nanop [HAP 20%); 3) pasta F [9.000 ppm F, NaF); 4) pasta placebo [sem HAP e F); 5) MI Paste [caseína e fosfato de cálcio); 6) MI Paste plus [caseína e fosfato de cálcio, 900 ppm F, NaF); 7) sem tratamento [controle). Os tratamentos foram realizados duas vezes ao dia, intercalados por ciclagem de pH (des-rernineralização], por 7 dias. Na sequência, as amostras foram analisadas por microdureza superficial e longitudinal (10-220 um). Os dados foram tabulados e submetidos à análise estatística [p<0,05). Em geral, os únicos tratamentos que tiveram efeito significativo na redução da desmineralização da dentina foram as pastas Nanop plus e F. Portanto, os dados confirmaram que o fluoreto ainda continua sendo o melhor agente químico para controlar a desmineralização dentária. Já a pasta experimental contendo nanopartículas de HAP foi ineficaz em reduzir a desmineralização da dentina utilizando-se o modelo experimental proposto

This study evaluated the potential of an experimental formulation containing HAP and sodium fluoride to reduce bovine dentin demineralization in vitro. Eighty-four bovine rools dentin samples were divided into 7 groups of 12 samples and subjected to one of the following treatments: 1) Nanop plus paste (HAP 20% + 9000 ppm F, NaF); 2) Nanop paste (HAP 20010) 3) F paste (9000 ppm F, NaF); 4) placebo paste (without HAP and F); 5) MI paste (casein and calcium phosphate); 6) MI Paste plus (casein and calcium phosphate, 900 ppm F, NaF); 7) no treatment (controll. The treatments were performed twice a day, interspersed by pH cycling (de-remineralization) for 7 days. Thereafter, the samples were analyzed using surface and cross-sectional microhardness (10-220 J.1m). The data was plotted and statistically analyzed (p<0.05). The treatments that produced a significant effect on the reduction of dentin demi• neralization were Nanop plus and F pastes only. Therefore, the data confirmed that fluoride is still the best chemical agent to control dental demineralization. The experimental paste containing HAP nanoparticles was ineffective in reducing dentin demineralization when using this experimental model

Assuntos

RESUMO

Fluoride varnishes play an important role in the prevention of dental caries, promoting the inhibition of demineralization and the increase of remineralization. Objective: This study aimed to analyze the amount of fluoride released into water and artificial saliva from experimental TiF4 and NaF varnishes, with different concentrations, for 12 h. Material and Methods: Fluoride varnishes were applied on acrylic blocks and then immersed in 10 ml of deionized water and artificial saliva in polystyrene bottles. The acrylic blocks were divided in seven groups (n=10): 1.55% TiF4 varnish (0.95% F, pH 1.0); 3.10% TiF4 varnish (1.90% F, pH 1.0); 3.10% and 4% TiF4 varnish (2.45% F, pH 1.0); 2.10% NaF varnish (0.95% F, pH 5.0); 4.20% NaF varnish (1.90% F, pH 5.0); 5.42% NaF varnish (2.45% F, pH 5.0) and control (no treatment, n=5). The fluoride release was analyzed after 1/2, 1, 3, 6, 9 and 12 h of exposure. The analysis was performed using an ion-specific electrode coupled to a potentiometer. Two-way ANOVA and Bonferroni's test were applied for the statistical analysis (p<0.05). Results: TiF4 varnishes released larger amounts of fluoride than NaF varnishes during the first 1/2 h, regardless of their concentration; 4% TiF4 varnish released more fluoride than NaF varnishes for the first 6 h. The peak of fluoride release occurred at 3 h. There was a better dose-response relationship among the varnishes exposed to water than to artificial saliva. Conclusions: The 3.10% and 4% TiF4 -based varnishes have greater ability to release fluoride into water and artificial saliva compared to NaF varnish; however, more studies must be conducted to elucidate the mechanism of action of TiF4 varnish on tooth surface. .

Assuntos

RESUMO

UNLABELLED: Fluoride varnishes play an important role in the prevention of dental caries, promoting the inhibition of demineralization and the increase of remineralization. OBJECTIVE: This study aimed to analyze the amount of fluoride released into water and artificial saliva from experimental TiF4 and NaF varnishes, with different concentrations, for 12 h. MATERIAL AND METHODS: Fluoride varnishes were applied on acrylic blocks and then immersed in 10 ml of deionized water and artificial saliva in polystyrene bottles. The acrylic blocks were divided in seven groups (n=10): 1.55% TiF4 varnish (0.95% F, pH 1.0); 3.10% TiF4 varnish (1.90% F, pH 1.0); 3.10% and 4% TiF4 varnish (2.45% F, pH 1.0); 2.10% NaF varnish (0.95% F, pH 5.0); 4.20% NaF varnish (1.90% F, pH 5.0); 5.42% NaF varnish (2.45% F, pH 5.0) and control (no treatment, n=5). The fluoride release was analyzed after 1/2, 1, 3, 6, 9 and 12 h of exposure. The analysis was performed using an ion-specific electrode coupled to a potentiometer. Two-way ANOVA and Bonferroni's test were applied for the statistical analysis (p<0.05). RESULTS: TiF4 varnishes released larger amounts of fluoride than NaF varnishes during the first 1/2 h, regardless of their concentration; 4% TiF4 varnish released more fluoride than NaF varnishes for the first 6 h. The peak of fluoride release occurred at 3 h. There was a better dose-response relationship among the varnishes exposed to water than to artificial saliva. CONCLUSIONS: The 3.10% and 4% TiF4 -based varnishes have greater ability to release fluoride into water and artificial saliva compared to NaF varnish; however, more studies must be conducted to elucidate the mechanism of action of TiF4 varnish on tooth surface.

Assuntos