RESUMO

Due to the anthropogenic pressures of expansion areas for livestock and agricultural production in the Brazilian Cerrado, it is of paramount importance to understand the dynamics of land use/land cover (LULC) changes in this region. Thus, we investigated LULC changes in two sub-basins of the Tocantins-Araguaia River basin from 1997 to 2015 and consequently projected future changes for the timespan between 2030 and 2050. The Formoso sub-basin experienced significant expansion of agricultural and pasture areas, whereas the Sono sub-basin limited farmland expansion (more stable native vegetation) due to substantial protected areas, trends that were also observed for future projections (2030 and 2050). Pastureland in the Formoso sub-basin increased by 5.8%, while the Sono sub-basin saw significant gains in cultivated land, according to change detection analyses during the 1997-2015 period. High stability probabilities of no change (> 70%) for grassland areas in the Sono River sub-basin and pasturelands in the Formoso River sub-basin were computed. The CA-Markov model demonstrated a high consistency level with actual LULC classes for both sub-basins, as indicated by an overall Kappa coefficient above 0.8. Future projections for 2030 and 2050 show a substantial expansion of agriculture and pasture in both sub-basins, driven by specific factors such as soil organic carbon stocks, distance from rural settlements, and proximity to rivers. Short- and mid-term simulations indicate substantial expansion of agriculture and pasture in both basins, with potential adverse impacts on water erosion. Consequently, developing policies for soil management and sustainable land use planning is essential for agroecosystem sustainability, promoting a balanced approach to economic development while addressing climate change and anthropogenic challenges.

Assuntos

RESUMO

Most of the soil quality assessment protocols are focused on crop production and conservation management, while studies on vital soil functions, such as water recharge potential, should be incorporated into the monitoring of impacts on environmental quality. Our objective was to evaluate, through the Nexus approach, how dynamic (land use and management) and inherent (soil type) factors impact soil physical properties and processes that drive water recharge potential, biomass production, and water erosion in the Cantareira System, Brazil. The assessment considered three soils (Typic Hapludult, Typic Dystrudept, and Typic Usthortent) and four land uses (native forest, rotational grazing, extensive grazing, and eucalyptus), which constitute the main soils and land uses in the Cantareira System region. Representative soil samples were collected at 0-5 and 30-35 cm depth and analyzed for several soil physical quality indicators, which were used to calculate a Soil Physical Quality Index based on soil functions. Converting the native forest to eucalyptus and pasture reduced the overall soil physical quality and water recharge potential. The groundwater recharge potential function in the topsoil has the highest score of 0.72 for Typic Dystrudept in native forest contrasting with 0.16 for extensive pasture. Typic Dystrudept obtained the highest value of the SPQI value (0-5 cm: 0.85; 30-35 cm: 0.90) for native forests when compared to Typic Hapludult (0-5 cm: 0.76; 30-35 cm: 0.57) and Typic Usthortent (0-5 cm: 0.75; 30-35 cm: 0.72). Our findings sustain that land use effects on soil functions depends on soil type. Inclusion of soil type into the Nexus approach increases the understanding of natural resources and derived benefits of water, energy and food in the Cantareira System.

RESUMO

Following the Fundão dam failure in Brazil, 60 million m3 of iron-rich tailings were released impacting an extensive area. After this catastrophe, a detailed characterization and monitoring of iron-rich tailings is required for agronomic and environmental purposes. This can be facilitated by using proximal sensors which have been an efficient, fast, and cost-effective tool for eco-friendly analysis of soils and sediments. This work hypothesized that portable X-ray fluorescence (pXRF) spectrometry combined with a pocket-sized (Nix™ Pro) color sensor and benchtop magnetic susceptibilimeter can produce substantial data for fast and clean characterization of iron-rich tailings. The objectives were to differentiate impacted and non-impacted areas (soils and sediments) based on proximal sensors data, and to predict attributes of agronomic and environmental importance. A total of 148 composite samples were collected on totally impacted, partially impacted, and non-impacted areas (natural soils). The samples were analyzed via pXRF to obtain the total elemental composition; via Nix™ Pro color sensor to obtain the red (R), green (G), and blue (B) parameters; and assessed for magnetic susceptibility (MS). The same samples used for analyses via the aforementioned sensors were wet-digested (USEPA 3051a method) followed by ICP-OES quantification of potentially toxic elements. Principal component analysis was performed to differentiate impacted and non-impacted areas. The pXRF data alone or combined with other sensors were used to predict soil agronomic properties and semi-total concentration of potentially toxic elements via random forest regression. For that, samples were randomly separated into modeling (70%) and validation (30%) datasets. The pXRF proved to be an efficient method for rapid and eco-friendly characterization of iron-rich tailings, allowing a clear differentiation of impacted and non-impacted areas. Also, important soil agronomic properties (clay, cation exchange capacity, soil organic carbon, pH and macronutrients availability) and semi-total concentrations of Ba, Pb, Cr, V, Cu, Co, Ni, Mn, Ti, and Li were accurately predicted (based upon the lowest RMSE and highest R2 and RPD values). Sensor data fusion (pXRF + Nix Pro + MS) slightly improved the accuracy of predictions. This work highlights iron-rich tailings from the Fundão dam failure can be in detail characterized via pXRF ex situ, providing a secure basis for complementary studies in situ aiming at identify contaminated hot spots, digital mapping of soil and properties variability, and embasing pedological, agricultural and environmental purposes.

Assuntos

RESUMO

Several materials have been characterized using proximal sensors, but still incipient efforts have been driven to plant tissues. Eucalyptus spp. cultivation in Brazil covers approximately 7.47 million hectares, requiring faster methods to assess plant nutritional status. This study applies portable X-ray fluorescence (pXRF) spectrometry to (i) distinguish Eucalyptus clones using pre-processed pXRF data; and (ii) predict the contents of eleven nutrients in the leaves of Eucalyptus (B, Ca, Cu, Fe, K, Mg, Mn, N, P, S, and Zn) aiming to accelerate the diagnosis of nutrient deficiency. Nine hundred and twenty samples of Eucalyptus leaves were collected, oven-dried, ground, and analyzed using acid-digestion (conventional method) and using pXRF. Six machine learning algorithms were trained with 70% of pXRF data to model conventional results and the remaining 30% were used to validate the models using root mean square error (RMSE) and coefficient of determination (R2). The principal component analysis clearly distinguished developmental stages based on pXRF data. Nine nutrients were accurately predicted, including N (not detected using pXRF spectrometry). Results for B and Mg were less satisfactory. This method can substantially accelerate decision-making and reduce costs for Eucalyptus foliar analysis, constituting an ecofriendly approach which should be tested for other crops.

RESUMO

Ca and Mg are the most important chemical elements in lime. Properly measuring Ca and Mg contents is essential to assess the quality of lime products. Quality control guarantees the adequate use of lime in industrial processes, in soils, and helps avoiding adulteration. Proximal sensors can aid in this process by determining Ca and Mg contents easily, rapidly and without producing chemical waste. The objective of this study was to evaluate the use an environmentally-friendly method of analyzing the quality of lime. We studied 1) the use of portable X-ray fluorescence (pXRF) to predict concentrations of Ca and Mg in lime, 2) tested if NixPro™ sensor can improve prediction accuracy and 3) tested if sample preparation methods (grinding) affect analyses. 74 samples of lime were analyzed by two different laboratories (lab. 1 = 38, lab. 2 = 36). All samples submitted to pXRF and NixPro™ analyses. Sensor analyses were done in whole (CP) and ground (AQ) samples to test the effect of sample preparation in prediction performance. High correlation was found between Ca and Mg contents measured via pXRF and laboratory analyses. Mg-CP presented the highest correlation coefficient (r = 0.81); Mg-AQ, the lowest (0.57). Predictions presented good performance (R2 > 0.68); Mg had the best results (0.86). Separating models per laboratory showed that some datasets are harder to model, probably due to variability in the source material (limestone). The addition of NixPro™ data contributed to improve prediction accuracy, although slightly. Predictions using CP samples presented the best results, especially for Mg, indicating that grinding is not necessary. This pioneer study demonstrated that fused proximal sensors can be used to rapidly and easily determine contents of Ca and Mg in soil amendments without producing chemical waste.

Assuntos

RESUMO

Tailings from iron mining are characterized by high concentrations of iron and manganese oxides, as well as high pH values. With these characteristics, most of the potentially toxic elements (PTE) contained in the tailings are somewhat unavailable. The aim of the present study was to evaluate how a reduction in the pH of iron mine tailings may affect PTE availabilities. The tailings were collected on the banks of the Gualaxo do Norte River (Mariana, MG, Brazil), one of the main areas impacted by the rupture of the Fundão Dam (Barragem de Fundão). A completely randomized experimental design was used, including five pH values (6.4, 5.4, 4.3, 3.7, and 3.4) and five replications. The concentrations of the PTE (Ba, Cr, Cd, Co, Cu, Fe, Mn, Pb, Ni, and Zn) were determined after extraction following different methodologies: USEPA 3051A, DTPA, Mehlich-1, Mehlich-3, and distilled water. A comparison of the available concentrations of the elements in the tailings with those in a soil not impacted by tailings shows that Cr, Cd, Cu, Fe, Mn, Ni, Ba, and Co were higher in the soil impacted by the tailings. The different methods used for evaluating the availability of PTE in the tailings at various pH exhibited the following decreasing order in relation to the quantity extracted: Mehlich-3 > Mehlich-1 > DTPA > distilled water. However, regarding sensitivity to change in pH, the order was DTPA > water > Mehlich-1 > Mehlich-3. The increases in the concentrations of PTE due to the reduction in the pH of the tailings did not lead to concentrations that exceed the limits of Brazilian regulations. The DTPA extractant exhibited higher coefficients of correlation between the PTE concentrations and the pH of the tailings, proving to be suitable for use in areas affected by the deposition of iron mine tailings.

Assuntos

RESUMO

Mercury (Hg) toxicity in soils depends on Hg species and other physical and chemical attributes, as selenium (Se) hotspots in soils, particularly relevant in Amazonian soils. The study of Hg species and their relations in representative locations of the Amazon rainforest biome is critical for assessing the potential risks of Hg in this environment. This work aimed to determine the concentration of total Hg and its species (Hg0, Hg22+ and Hg2+), and to correlate Hgtotal concentration with total elemental composition, magnetic susceptibility, and physicochemical attributes of Amazon soils. Nine sites in the Amazon rainforest biome, Brazil, were selected and analyzed for their chemical, physical, and mineralogical attributes. The clay fraction of the studied Amazon soils is dominated by kaolinite, goethite, hematite, gibbsite, and quartz. Mica was also found in soils from the States of Acre and Amazonas. Hgtotal ranged from 21.5 to 208 µg kg-1 (median = 104 µg kg-1), and the concentrations did not exceed the threshold value established for Brazilian soils (500 µg kg-1). The Hg2+ was notably the predominant species. Its occurrence and concentration were correlated with the landscape position and soil attributes. Hgtotal was moderately and positively correlated with TiO2, clay, and Se. The findings showed that geographic location, geological formation, and pedological differences influence the heterogeneity and distribution of Hgtotal in the studied soil classes. Thus, a detailed characterization and knowledgment of the soil classes is very important to clarify the complex behavior of this metal in the Amazon rainforest biome.

Assuntos

RESUMO

Tillage modifies soil structure, which can be demonstrated by changes in the soil's physical properties, such as penetration resistance (PR) and soil electrical resistivity (ρ). The aim of this study was to evaluate the effect of deep tillage strategies on three morphogenetically contrasting soil classes in the establishment of perennial crops regarding geophysical and physical-hydric properties. The experiment was conducted in the state of Minas Gerais, southeastern Brazil. The tillage practices were evaluated in Typic Dystrustept, Rhodic Hapludult, and Rhodic Hapludox soil classes, and are described as follows: MT­plant hole; CT­furrow; SB­subsoiler; DT­rotary hoe tiller; and DT + calcium (Ca) (additional liming). Analyses of PR and electrical resistivity tomography (ERT) were performed during the growing season and measurements were measured in plant rows of each experimental plot. Undisturbed soil samples were collected for analysis of soil bulk density (Bd) at three soil depths (0−0.20, 0.20−0.40, and 0.40−0.60 m) with morphological evaluation of soil structure (VESS). Tukey's test (p < 0.05) for Bd and VESS and Pearson linear correlation analysis between Bd, ρ, and PR were performed. Soil class and its intrinsic attributes have an influence on the effect of tillage. The greatest effect on soil structure occurred in the treatments DT and DT + Ca that mixed the soil to a depth of 0.60 m. The ρ showed a positive correlation with Bd and with PR, highlighting that ERT may detect changes caused by cultivation practices, although ERT lacks the accuracy of PR. The soil response to different tillage systems and their effects on soil structure were found to be dependent on the soil class.

RESUMO

The color of plant leaves can be assessed qualitatively by color charts or after processing of digital images. This pilot study employed a novel pocket-sized sensor to obtain the color of plant leaves. In order to assess its performance, a color-dependent parameter (SPAD index) was used as the dependent variable, since there is a strong correlation between SPAD index and greenness of plant leaves. A total of 1,872 fresh and intact leaves from 13 crops were analyzed using a SPAD-502 meter and scanned using the Nix™ Pro color sensor. The color was assessed via RGB and CIELab systems. The full dataset was divided into calibration (70% of data) and validation (30% of data). For each crop and color pattern, multiple linear regression (MLR) analysis and multivariate modeling [least absolute shrinkage and selection operator (LASSO), and elastic net (ENET) regression] were employed and compared. The obtained MLR equations and multivariate models were then tested using the validation dataset based on r, R2, root mean squared error (RMSE), and mean absolute error (MAE). In both RGB and CIELab color systems, the Nix™ Pro color sensor was able to differentiate crops, and the SPAD indices were successfully predicted, mainly for mango, quinoa, peach, pear, and rice crops. Validation results indicated that ENET performed best in most crops (e.g., coffee, corn, mango, pear, rice, and soy) and very close to MLR in bean, grape, peach, and quinoa. The correlation between SPAD and greenness is crop-dependent. Overall, the Nix™ Pro color sensor was a fast, sensible and an easy way to obtain leaf color directly in the field, constituting a reliable alternative to digital camera imagery and associated image processing.

Assuntos

RESUMO

Electromagnetic sensors are widely used to monitor soil water content (θ); however, site-specific calibrations are necessary for accurate measurements. This study compares regression models used for calibration of soil moisture sensors and investigates the relation between soil attributes and the adjusted parameters of the specific calibration equations. Undisturbed soil samples were collected in the A and B horizons of two Ultisols and two Inceptisols from the Mantiqueira Range in Southeastern Brazil. After saturation, the Theta Probe ML2X was used to obtain the soil dielectric constant (ε). Several readings were made, ranging from saturation to oven-dry. After each reading, the samples were weighted to calculate θ (m³ m-³). Fourteen regression models (linear, linearized, and nonlinear) were adjusted to the calibration data and checked for their residue distribution. Only the exponential model with three parameters met the regression assumptions regarding residue distribution. The stepwise regression was used to obtain multiple linear equations to estimate the adjusted parameters of the calibration model from soil attributes, with silt and clay contents providing the best relations. Both the specific and the general calibrations performed well, with RMSE values of 0.02 and 0.03 m³ m-³, respectively. Manufacturer calibration and equations from the literature were much less accurate, reinforcing the need to develop specific calibrations.

Assuntos