RESUMO

This study aimed to evaluate the thermoregulatory capacity and performance of Saanen goat kids from birth to weaning in a hot climate. Twelve newborn males and female goat kids with an initial body weight of 4.17 ± 0.81 kg were used. Physiological responses, climatic variables, and biometric traits data were collected. Univariate and multivariate analysis techniques were used. Heart rate (HR) was high up to the 6th week of life, with a reduction from the 7th week on (P < 0.001). Rectal temperature (RT) was lower in the first 2 weeks (P < 0.001), with an increase and stabilization occurring in the 7th and 8th weeks. Coat surface temperature (ST) was more activated from the 5th week onwards (P < 0.001). Body weight (BW) and withers height (WH) were higher in later weeks of the calving phase with a linear effect (P < 0.001). The first principal component demonstrated the relationship of sensible heat dissipation × body area of the goat kids; the second component shows the relationship of meteorological data with RT, having a positive relationship between RT with RH and negative with AT, and the third component points to the association of RR and HR. Of the animals, 81.3% were correctly classified in their group of origin in discriminant canonical analysis, with emphasis on the classification of the kids in the 1st-2nd and 3rd-4th weeks (classification percentage Æ© = 95.8%). It is concluded that (i) newborn kids activate latent mechanisms to maintain their homoeothermic during the first 2 weeks of life, and as they grow, they use sensitive heat loss processes, especially from the 5th week of life onwards and (ii) male and female goats do not show sexual dimorphism effect on body performance and body morphometric measurements up to 60 days of life.

Assuntos

RESUMO

OBJECTIVE: To investigate, in vitro, the influence of at-home bleaching with 16% carbamide peroxide (CP) gels containing different thickeners on the color, gloss, roughness, and microhardness of a composite resin with bisphenol A (BPA) and without bisphenol A (BPA-free). MATERIAL AND METHODS: Cylindrical samples (7 × 2 mm) of a composite resin with BPA (Filtek Z350 XT®; 3M/ESPE) and composite resin BPA-free (Vittra APS®; FGM) were subdivided into six subgroups (n = 12), according to the bleaching gel used: no bleaching (control), commercial gel with 16% CP and carbopol, experimental gel with 16% CP and carbopol, experimental gel with 16% CP and natrosol, experimental gel with carbopol and experimental gel with natrosol. At the end of the experimental phase, the specimens were analyzed for color (ΔE*ab and ΔE00 ), surface roughness (Ra), gloss (GU), and surface microhardness (SMH). The data for all analyzes were submitted to Levene's test, Shapiro-Wilk's test and ANOVA. RESULTS: For ΔE*ab and ΔE00 no statistically significant differences were found between all groups evaluated. Bleaching with experimental 16% CP gel with carbopol resulted in the lowest GU values for both composite resins evaluated. 16% CP experimental gel with natrosol resulted in higher Ra for the BPA composite resin and the bleaching with natrosol resulted in higher Ra for BPA-free. About 16% CP experimental gel with carbopol and 16% CP experimental gel with natrosol resulted in the lowest final SMH for composite resin with BPA. For the BPA-free composite resin, no differences were found between the groups in SMH for the same resin, however they presented the lowest values compared with all others groups. CONCLUSION: The effects on physical properties are dependent on the composition of the composite resin and the thickener/bleaching gel used. The BPA-free composite resin showed less changes after exposure to bleaching agent, although its initial physical properties were worse compared to a bleached BPA. CLINICAL RELEVANCE: The hydrogen peroxide and thickener of the at-home bleaching gel does impact the properties of composites with BPA or BPA-free such as gloss, roughness and surface microhardness, extremely important factors for maintaining an aesthetically and physically satisfactory restoration. BPA-free composite resins have inferior properties after at-home bleaching with different thickeners.

Assuntos

RESUMO

The aim of this randomized double-blinded study was to evaluate the enamel surface roughness and color change after one month of whitening toothpaste use and the color stability obtained 1 month after its interruption. 30 volunteers were divided into 3 groups (n = 10) corresponding to the dentifrices: 1) Colgate Total 12 Clean Mint (TD) (Control), 2) Colgate Luminous White (LW) and 3) Sensodyne Whitening Extra Fresh (SB). The volunteers were impression with addition silicone to obtain an epoxy resin replica of the upper central incisor for the initial surface roughness evaluation using a profilometer and the initial color of the incisors and canines was evaluated with a spectrophotometer after one week of wash-out. After 1 month, the color of the central incisors and canines was measured again, and the volunteers were molded to obtain a second replica to the final roughness analysis. Data were submitted to ANOVA-one way (p≤0.05). The results showed that there was no statistical difference between the dentifrices for color difference and surface roughness for all the studied conditions. It was possible to conclude that the whitening dentifrices used in this study were not able to alter the initial color of the teeth and did not cause changes in the surface roughness of enamel.

Assuntos

RESUMO

In grasses, leaf expansion and central rib growth occur in a non-proportional manner, with potential implications to the nutritive value of leaves. The objective of this study was to evaluate the relationship among blade length, percentage of central rib, anatomical characteristics and the nutritive value along the length of leaf blades of different sizes and hierarchical order of insertion on the tiller axis of Napier elephant grass (Pennisetum purpureum Schum. cv. Napier). Two experiments were carried out with isolated growing plants during the summer of 2017 (January to March). Central rib mass increased linearly with the increase in leaf blade mass and its percentage relative to blade mass decreased from the base to the tip of the leaf. There were no significant variations in anatomical characteristics along the length of leaf blades when central rib was not taken into account. The central rib showed negative relationship with nutritive value. The apical portions of long leaves showed similar digestibility to short leaves. The multivariate analysis of Cluster and Principal Components grouped the response variables according to leaf hierarchical order, final blade length and percentage of structural tissues, highlighting the relationship between leaf size, structural tissues and nutritive value.

Assuntos

RESUMO

Crop pests have negative impacts on yield. This paper proposes a spatiotemporal geostatistical modeling to compare data of adult Syrphidae fly count and corn leaf aphid Rhopalosiphum maidis (Fitch, 1856) colonies in corn crops. The use of a geostatistical model that allows the space-time variation makes the approach more interesting because it is a more complete model. Multiple regression was used to model the trend component for the variable response adult Syrphidae fly count and corn leaf aphid colonies, with the coordinates serving as covariates and the spatiotemporal variations around the deviation are described by a random spacetime residual field. Finally, the prediction map obtained by kriging may be a biological indicator of possible corn leaf aphid colonies in the corn crop. It was possible to verify that the occurrence of the pest provided a significant increase in adult predators and seminatural habitats may favor populations of natural enemies.

Assuntos

RESUMO

The adaptation of the Global Navigation Satellite Systems (GNSS) technology to fit the needs of farmers requires knowledge of the accuracy level delivered by a GNSS receiver in working conditions. To date, no methodology indicates the minimum number of replications to perform a statistical comparison. This study aims to advance knowledge on the methodological approach for evaluating the static and dynamic performance of GNSS receivers commonly used in agricultural operations. For the static test, a supporting frame in the ground carried all the receivers with coordinates properly transported. In the dynamic test, a circular rail with a 9.55 m radius was installed at ground level with a platform driven by an electric motor to carry the receivers at a constant speed. The transversal error of the receiver to the circular reference line was measured. The error with 95 % probability (E95) to receivers without differential correction ranged between 4.22 m and 0.85 m in the static test, and 2.25 m and 0.98 m in the dynamic test. Receivers with differential correction had E95 values below 0.10 m in the static test and 0.16 m in the dynamic test. Receivers with C/A code require five replications at minimum and 13 replications are needed for L1/L2 with differential correction signals in the dynamic test. The static test needs nine replications for C/A and five for L1/L2 with differential correction signals.

Assuntos

RESUMO

ABSTRACT Crop pests have negative impacts on yield. This paper proposes a spatiotemporal geostatistical modeling to compare data of adult Syrphidae fly count and corn leaf aphid Rhopalosiphum maidis (Fitch, 1856) colonies in corn crops. The use of a geostatistical model that allows the space-time variation makes the approach more interesting because it is a more complete model. Multiple regression was used to model the trend component for the variable response adult Syrphidae fly count and corn leaf aphid colonies, with the coordinates serving as covariates and the spatiotemporal variations around the deviation are described by a random spacetime residual field. Finally, the prediction map obtained by kriging may be a biological indicator of possible corn leaf aphid colonies in the corn crop. It was possible to verify that the occurrence of the pest provided a significant increase in adult predators and seminatural habitats may favor populations of natural enemies.

RESUMO

The adaptation of the Global Navigation Satellite Systems (GNSS) technology to fit the needs of farmers requires knowledge of the accuracy level delivered by a GNSS receiver in working conditions. To date, no methodology indicates the minimum number of replications to perform a statistical comparison. This study aims to advance knowledge on the methodological approach for evaluating the static and dynamic performance of GNSS receivers commonly used in agricultural operations. For the static test, a supporting frame in the ground carried all the receivers with coordinates properly transported. In the dynamic test, a circular rail with a 9.55 m radius was installed at ground level with a platform driven by an electric motor to carry the receivers at a constant speed. The transversal error of the receiver to the circular reference line was measured. The error with 95 % probability (E95) to receivers without differential correction ranged between 4.22 m and 0.85 m in the static test, and 2.25 m and 0.98 m in the dynamic test. Receivers with differential correction had E95 values below 0.10 m in the static test and 0.16 m in the dynamic test. Receivers with C/A code require five replications at minimum and 13 replications are needed for L1/L2 with differential correction signals in the dynamic test. The static test needs nine replications for C/A and five for L1/L2 with differential correction signals.(AU)

Assuntos

RESUMO

OBJECTIVE: To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. METHODOLOGY: A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). RESULTS: The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. CONCLUSION: Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Assuntos

RESUMO

Abstract Objective To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. Methodology A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). Results The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. Conclusion Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Assuntos