RESUMO
The procedure followed by the Nuclear Metrology Laboratory (LMN) at the IPEN for the primary standardization of a (243Am + 239Np) solution, in secular equilibrium, is described. The measurement was carried out in a 4π(PC) (α,ß)-γ coincidence system. The total activity per unit mass of the solution was determined by the extrapolation technique, using a software coincidence counting systsem. The extrapolation curves were compared with Monte Carlo calculations by means of Code ESQUEMA, used in previous works, which, was improved and applied in order to calculate the alpha, beta, gamma, X-rays and coincidence spectra.
RESUMO
This study aimed to evaluate the effects of partially replacing corn silage (CS) with whole-plant soybean silage (SS) or black oat silage (OS) on nutrient intake and digestibility, in vitro neutral detergent fiber degradability of silages, feeding behavior, rumen fermentation, and performance of dairy cows. Twenty-four lactating Holstein cows (6 of which were rumen-cannulated) with 32.5 ± 4.92 kg/d milk yield, 150 ± 84.8 days in milk, and 644 ± 79.0 kg of body weight were used in a 3 × 3 Latin square design to evaluate the following treatments: (1) corn silage diet (CSD): using corn silage as the only forage source in the diet [48% dietary dry matter (DM)]; (2) whole-plant soybean silage diet (SSD): SS replacing 16% of corn silage from CSD; and (3) black oat silage diet (OSD): OS replacing 16% of corn silage from CSD. The inclusion of OS and SS decreased intakes of DM, organic matter, and crude protein. Corn silage had the greatest in vivo effective degradability of DM, and SS had the least effective degradability of neutral detergent fiber. The OSD treatment decreased milk and protein yields, whereas SSD increased rumen ammonia nitrogen concentration compared with the other diets. Cows fed OSD exhibited a greater preference for feed with small particles (<4 mm) compared with those fed SSD. Cows fed treatments containing either SS or OS at the expense of CS had increased rumination and chewing activities. Although replacing CS with OS and SS reduced feed intake, SS had no effect on productive performance of dairy cows.
Assuntos
Silagem , Zea mays , Animais , Avena , Bovinos , Dieta/veterinária , Fibras na Dieta , Digestão , Feminino , Lactação , Leite , Rúmen , Silagem/análise , Glycine maxRESUMO
This study aimed to evaluate the effects of increasing dietary levels of microalgae (ALG), rich in docosahexaenoic acid (DHA; All-G-Rich, Alltech, Nicholasville, KY), in isolipidic diets, on animal performance, nutrient digestibility, ruminal fermentation, milk fatty acid profile, energy balance, microbial protein synthesis, and blood serum metabolites in mid-lactating dairy cows. Twenty-four Holstein cows [130.3 ± 15.4 d in milk, and 30.8 ± 0.543 kg/d of milk yield (mean ± standard error)] were used in a 4 × 4 Latin square design experiment to evaluate the following treatments: control diet, without addition of ALG; and increasing levels of ALG [2, 4, and 6 g/kg of dry matter (DM)]. The ALG decreased DM intake and increased total-tract DM apparent digestibility. A tendency was observed for a quadratic effect on total-tract NDF digestibility by ALG inclusion, with peak value of the quadratic response at 4.13 g/kg of DM dose. Moreover, ALG increased ruminal pH and decreased acetate and total volatile fatty acid concentrations. Fat-corrected milk and energy-corrected milk were quadratically affected, and a tendency for a milk yield effect was observed when ALG levels increased, whereas maximal yields were observed with intermediate doses. Milk fat, protein, and lactose concentrations were diminished, whereas productive efficiency was improved by the increase of ALG levels. Saturated fatty acid proportions were decreased, whereas polyunsaturated fatty acid proportions were increased when ALG was fed. There was low DHA transfer into milk; however, ALG inclusion decreased C18:0, C18:1 cis-9, C18:2 cis-9,12, and C18:3 cis-9,12,15 proportions, and increased C18:2 cis-9,trans-11, C18:1 trans-9, and C18:1 trans-11 proportions. Gross energy intake was decreased, whereas no effect was observed on digestible, metabolizable, or net energy intake. The ALG inclusion quadratically affected the microbial protein synthesis, with maximal enhancement at 3.24 g/kg of DM dose, and also increased serum cholesterol concentration. Under the conditions of this experiment, the inclusion of ALG in diets for mid-lactating dairy cows decreased feed intake and increased nutrient digestibility, improving productive efficiency and modifying milk fatty acid profile. Estimated intermediate doses (1.22 to 2.90 g/kg of DM) of DHA-rich ALG may be beneficial to milk, fat-corrected milk, and energy-corrected milk yields, and is recommended for dairy cows.
Assuntos
Ração Animal , Bovinos , Dieta/veterinária , Ácidos Docosa-Hexaenoicos/farmacologia , Ácidos Graxos Voláteis/metabolismo , Microalgas , Leite/metabolismo , Ruminação Digestiva , Ração Animal/análise , Animais , Indústria de Laticínios , Feminino , Fermentação , Lactação , Lactose/metabolismo , Distribuição Aleatória , Rúmen/metabolismoRESUMO
The standardization of (111)In by means of a 4πß-γ coincidence system, composed of a proportional counter in 4π geometry, coupled to a 20% relative efficiency HPGe crystal, for measuring gamma-rays is presented. The data acquisition was performed by means of the software coincidence system (SCS) and the activity was determined by the extrapolation technique. Two gamma-ray windows were selected: at 171 keV and 245 keV total absorption peaks, allowing the determination of the total internal conversion coefficient for these two gamma transitions. The results were compared with those available in the literature.
RESUMO
This work describes the method developed by the Nuclear Metrology Laboratory in IPEN, São Paulo, Brazil, for the standardization of a (57)Co radioactive solution. Cobalt-57 is a radionuclide used for calibrating gamma-ray and X-ray spectrometers, as well as a gamma reference source for dose calibrators used in nuclear medicine services. Two 4pibeta-gamma coincidence systems were used to perform the standardization, the first used a 4pi(PC) counter coupled to a pair of 76 mm x 76 mm NaI(Tl) scintillators for detecting gamma-rays, the other one used a HPGe spectrometer for gamma detection. The measurements were performed by selecting a gamma-ray window comprising the (122 keV+136 keV) total absorption energy peaks in the NaI(Tl) and selecting the total absorption peak of 122 keV in the germanium detector. The electronic system used the TAC method developed at LMN for registering the observed events. The methodology recently developed by the LMN for simulating all detection processes in a 4pibeta-gamma coincidence system, by means of the Monte Carlo technique, was applied and the behavior of extrapolation curve compared to experimental data. The final activity obtained by the Monte Carlo calculation agrees with the experimental results within the experimental uncertainty.
Assuntos
Radioisótopos de Cobalto/normas , Medicina Nuclear/métodos , Análise Espectral/normas , Brasil , Métodos , Padrões de Referência , Espectrometria gama , Pesos e Medidas , Raios XRESUMO
The present work describes the methodology for predicting the behavior of extrapolation curves obtained in radionuclide standardization by 4pibeta-gamma coincidence measurements, applied to (22)Na, developed at the Laboratório de Metrologia Nuclear of IPEN-CNEN/SP (LMN-Nuclear Metrology Laboratory). The LMN system consists of a proportional counter (PC) in 4pi geometry coupled to a single or a pair of NaI(Tl) scintillation crystals. Two standardization techniques were used: the Sum-Peak and the Nuclear-Peak methods. The theoretical response functions of each detector have been calculated using the MCNPX Monte Carlo code. The code ESQUEMA, developed at LMN, has been used for calculating the extrapolation curve in the 4pibeta-gamma coincidence experiment. Modifications were performed in order to include response tables for positrons and coincidences with annihilation photons. From the calibration results it was possible to extract both the activity value and the positron emission probability per decay. The latter was compared with results from the literature.
RESUMO
The procedure followed by the Nuclear Metrology Laboratory (LMN), at the Nuclear and Energy Research Institute (IPEN), for the primary standardization of (177)Lu is described. This radionuclide is widely used in radiopharmacy due to its convenient half-life and emitted beta ray energies. The (177)Lu solution was supplied during an international comparison sponsored by BIPM in 2009 and the primary standardization has been accomplished by the 4pibeta-gamma coincidence method using a proportional counter in 4pi geometry coupled with two NaI(Tl) scintillation counters. The beta efficiency was varied by placing Collodion and aluminum absorbers over and under the radioactive source. The (177)Lu calibrated sources were also measured in a previously calibrated HPGe spectrometer, in order to obtain the emission probability per decay for the selected gamma-ray transitions. The experimental extrapolation curves were also compared with Monte Carlo simulations by means of code ESQUEMA developed at the LMN.
Assuntos
Raios gama , Lutécio/análise , Lutécio/normas , Métodos , Probabilidade , Compostos Radiofarmacêuticos/normas , Padrões de ReferênciaRESUMO
In this paper results of X-ray and gamma-ray emission probabilities per decay of (51)Cr and (241)Am are presented. The measurements were carried out by means of HPGe planar and REGe spectrometers. The activity of (51)Cr and (241)Am samples was determined in a 4pibeta-gamma coincidence counting system. The HPGe spectrometers were calibrated in a well defined geometry by means of (54)Mn, (55)Fe, (57)Co, (133)Ba, (152)Eu, (166m)Ho and (241)Am sources, previously standardized in a 4pibeta-gamma coincidence system. The MCNP Monte Carlo code was used for simulation of the REGe spectrometer calibration curve, for the selected geometry, and compared with the experimental curve. The experimental results were compared with data from literature.
Assuntos
Amerício/análise , Radioisótopos de Cromo/análise , Radiometria/métodos , Espectrometria gama/métodos , Amerício/química , Radioisótopos de Cromo/química , Interpretação Estatística de Dados , Raios gama , Meia-Vida , Doses de Radiação , Raios XRESUMO
The k(0) method for quantitative reactor neutron activation analysis (NAA) has been applied in several laboratories for the determination of multi-elemental concentrations in different materials. The general formula that yields the concentration value can be divided in two parts: one involving detection parameters and the other involving irradiation parameters. A rigorous uncertainty calculation must take into account the correlations between each of these parameters. The Nuclear Metrology Laboratory at IPEN has a research program intended to develop a methodology applying covariance analysis in order to obtain the overall uncertainty in the concentrations of different elements in a given sample, and the correlation between each pair of them. The present paper concentrates in the determination of the neutron spectrum shape factor alpha by two methods: Cd-covered and Cd-ratio, using experimental data obtained in the IEA-R1 research reactor. The final values for alpha were: (0.001+/-0.018) and (0.001+/-0.019) for the Cd-covered and Cd-ratio methods, respectively, in good agreement with each other.
Assuntos
Algoritmos , Modelos Químicos , Análise de Ativação de Nêutrons/métodos , Análise Espectral/métodos , Simulação por Computador , Modelos EstatísticosRESUMO
Specific activity results of (51)Cr, (67)Ga, (99m)Tc and (201)Tl radioactive solutions, measured in different dose calibrators located at nuclear medicine services and in a calibrated HPGe gamma spectrometer, were compared. The HPGe spectrometer was calibrated in a well defined geometry by means of (60)Co, (133)Ba, (152)Eu, (166m)Ho and (241)Am sources, previously standardized in a 4pibeta-gamma coincidence system. Despite the observed differences, the results may be accepted within the 10% uncertainty range, established by Brazilian regulatory standards.