RESUMO

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Assuntos

RESUMO

Langmuir monolayers have been used as cell membrane models, where lipid composition is normally varied to mimic distinct types of membranes. For eukaryotic membranes, for instance, rather than using only zwitterionic phospholipids there is now a trend to employ mixtures to simulate the lipid rafts known to be relevant for various cellular processes. In this study, we demonstrate that effects from chitosans on Langmuir monolayers are considerably higher if lipid raft compositions (ternary mixtures of dipalmitoyl phosphatidyl choline (DPPC), sphingomyelin (SM) and cholesterol) are used. Significantly, measurable effects on the surface pressure isotherms start at 10-6 mg mL-1 for chitosans in lipid rafts, to be compared with 10-2 mg mL-1 for neat dipalmitoyl phosphatidylcholine (DPPC). This applies to both a commercial chitosan and chitosans soluble at physiological pH. Incorporation of these chitosans in the raft monolayers was confirmed in polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) experiments, where both the tail groups and headgroups were found to interact with chitosan. Since the effects on membrane models may be observed at such small concentrations for chitosans and probably other molecules, some studies may have to be revisited where neat phospholipids should be replaced by lipid raft compositions.

Assuntos

RESUMO

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system. In addition to monitoring the diffusion, it was also possible to observe a process of preferential interaction between Chi and SPS. Thus, the nitrogen N 1s peak, due to functional groups found exclusively in chitosan chains, was the key factor to identifying the molecular interactions involving chitosan and the different polyanions. Accordingly, the presence of a strong polyanion such as SPS shifts the N 1s peak to a higher level of binding energy. Such results highlight that understanding the fundamentals of polymer interactions is a major step to fine-tuning the internal architecture of LbL structures for specific applications (e.g., drug release).

RESUMO

This study applied the use of marine-derived fungus Penicillium citrinum CBMAI 1186 in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde 1. The fungus immobilized on chitosan, obtained by multistep ultrasound-assisted deacetylation process (Ch-USAD), produced the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 49%, 40% ee) isomer and (±)-2-methyl-3-phenylacrilic acid 4 (c = 35%); in contrast, immobilized mycelia on commercial chitosan (Ch-C) yielded the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 48%, 10% ee) and (±)-2-methyl-3-phenylpropanal 1a (c = 41%). The reaction using free mycelia gave a 40% yield of (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 with 10% ee. These results showed that the crystallinity form and molecular weight of chitosan (Ch-C or Ch-USAD) used to immobilized mycelia of P. citrinum CBMAI 1186 influenced in the biotransformation of (E)-2-methyl-3-phenylacrylaldehyde 1. Therefore, marine-derived fungus P. citrinum CBMAI 1186 immobilized on chitosan can be a potential alternative in the studies of hydrogenation of the α,ß-unsaturated carbon-carbon (α,ß-C=C) double bond. Marine-derived fungus Penicillium citrinum CBMAI 1186 immobilized on chitosan in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde.

Assuntos

RESUMO

Methoxypoly(ethyleneglycol)-graft-chitosan (PEG-g-Ch) was prepared by grafting polyethyleneglycol into chitosans (Ch) exhibiting different average degree of deacetylation (60% < DD¯â€¯< 95%). 1H NMR showed that PEG-g-Ch derivatives presented high average degree of N-substitution (DS¯â€¯≈ 40%) and such derivatives exhibited full water solubility at 1.0 < pH < 11.0. The mPEG-g-Ch derivatives displayed much lower intrinsic viscosity (20 mL g-1 < [η] < 110 mL g-1) as compared to the parent chitosans (440 mL g-1 < [η] < 1650 mL g-1) due to extensive exposition of PEG chains to the aqueous medium and compact coiling of the chitosan backbone. The presence of numerous PEG chains grafted into chitosan also determined the crystalline arrangement and the thermal stability of PEG-g-Ch derivatives. The rheological study showed that the concentrated aqueous solutions of PEG-g-Ch derivatives displayed pseudoplastic behavior regardless of the parent chitosans´ characteristics and no dependence of dynamic viscosity on the temperature. However, PChD2 (DD¯â€¯≈ 76%; [η] ≈ 1201 mL g-1) showed a distinct rheological behavior as it formed a physically cross-linked hydrogel that exhibited a thermo-induced sol-gel transition at ≈38 °C.

Assuntos

RESUMO

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation. However, for CMC/CHI films, the pH of the medium and [Formula: see text] of chitosan strongly affected the film structure and composition. Consequently, the structure and the axial composition of chitosan-based films can be finely adjusted by choosing the polyanion and defining the chitosan to be used according to its DA and [Formula: see text] for the desired application, as demonstrated by the antibacterial tests.

RESUMO

The demand for low cost and effective materials to remove contaminants such as residues of oil spills has encouraged studies on new biosorbents produced from wastes. Considering the overgeneration of fishing residues and the necessity to provide an alternative purpose for such materials, this study aimed to evaluate squid gladius and its derivatives (ß-chitin and chitosan) as sorbents to remove marine diesel oil (MDO) from fresh and artificial seawater. It was also executed an attempted to improve their performances through a high-intensity ultrasound treatment (UT-gladius and UT-ß-chitin). All sorbents removed MDO at both salinities. Contact surface area, salinity, and water retention seemed to play a key role in the outcomes. UT-ß-chitin's performance was significantly superior to ß-chitin's and chitosan's in MDO removal at salinity 0, as well as at salinity 30, where gladius and UT-gladius also excelled. Ultrasound treatment improved the oil removal performance of UT-ß-chitin by increasing its contact surface area. This is the first report on the efficiency of gladius and UT-ß-chitin for such purpose, and brought up huge possibilities and new questions that can lead to the achievement of biosorbents of great efficiency.

Assuntos

RESUMO

Highly porous genipin cross-linked membranes of carboxymethylchitosan exhibiting different crosslinking degree (3%

Assuntos