RESUMO
A levan-type fructooligosaccharide was produced by a Paenibacillus strain isolated from Brazilian crude oil, the purity of which was 98.5% after precipitation with ethanol and dialysis. Characterization by FTIR, NMR spectroscopy, GC-FID and ESI-MS revealed that it is a mixture of linear ß(2 â 6) fructosyl polymers with average degree of polymerization (DP) of 18 and branching ratio of 20. Morphological structure and physicochemical properties were investigated to assess levan microstructure, degradation temperature and thermomechanical features. Thermal Gravimetric Analysis highlighted degradation temperature of 218 °C, Differential Scanning Calorimetry (DSC) glass transition at 81.47 °C, and Dynamic Mechanical Analysis three frequency-dependent transition peaks. These peaks, corresponding to a first thermomechanical transition event at 86.60 °C related to the DSC endothermic event, a second at 170.9 °C and a third at 185.2 °C, were attributed to different glass transition temperatures of oligo and polyfructans with different DP. Levan showed high morphological versatility and technological potential for the food, nutraceutical, and pharmaceutical industries.
Assuntos
Frutanos/isolamento & purificação , Paenibacillus/metabolismo , Petróleo/microbiologia , Configuração de Carboidratos , Fracionamento Químico , Temperatura Alta , Relação Estrutura-Atividade , VitrificaçãoRESUMO
The efficacy of a simple laboratory method for cell disruption based on the glass bead stirring, sonication, osmotic shock, freezing and grinding, or use of solvents and detergents was assessed in this study, via measurements of the release of total protein and L-asparaginase activity. Three different microbial sources of L-asparaginase were used: Escherichia coli BL21 (DE3), Leucosporidium muscorum, and Aspergillus terreus (CCT 7693). This study adjusted and identified the best procedure for each kind of microorganism. Sonication and glass bead stirring led to obtaining filamentous fungus cell-free extracts containing high concentrations of soluble proteins and specific activity; however, sonication was the best since it obtained 4.61 ± 0.12 IU mg-1 after 3 min of operation time. Mechanical methods were also the most effective for yeast cell disruption, but sonication was the technique which yielded a higher efficiency releasing 7.3 IUtotal compared to glass bead stirring releasing 2.7 IUtotal at the same operation time. For bacterium, sonication proved to be the best procedure due to getting the highest specific activity (9.01 IU mg-1) and total enzyme activity (61.7 IU). The data presented lead to conclude that the mechanical methods appeared to be the most effective for the disintegration of the all microbial cells studies. This is the first report related to the experimental comparison of L-ASNase extraction procedures from different microorganisms, which can also be used for extracting periplasm located enzymes from other organisms.