RESUMO

During alcoholic fermentation, most of the substrates supplied to the yeasts are converted into ethanol and carbon dioxide generating energy for cell maintenance. However, some of these substrates end up being diverted to other metabolic pathways generating by-products reducing the yield in ethanol production. Glycerol is the most important by-product quantitatively, and its production during fermentation is associated to the production of ethanol. The present study was carried out at a full scale in an industrial fermentation plant applied to sugar cane industry with bioreactors operated in fed-batch mode. Varying levels of the operating factors feeding time, temperature, and concentration of yeast were used in order to verify the interaction between ethanol and glycerol in the fermentative kinetics and how these factors can be optimized to increase ethanol production with reduced carbon losses during the formation of other products. The results obtained indicated that glycerol production is linearly associated with ethanol production and that this correlation is influenced by the process conditions. Feeding time had a significant effect and was inversely proportional to the glycerol/ethanol production ratio. Therefore, it can be said that a moderate feeding rate can reduce the production of glycerol in relation to the ethanol produced reducing losses and increasing the fermentation yield.

Assuntos

RESUMO

In order for the use of biological carotenoids to become feasible, it is necessary to have adequate low cost sources and improved methods of cultivation. The aim of this study was to evaluate the effect of supplementation with nitrogen, phosphorus, zinc, and magnesium, on the biomass and carotenoid volumetric production by yeast Rhodotorula rubra L02 using a complex medium (sugarcane juice) and synthetic media (sucrose and maltose) as substrates. The experimental design used for each substrate was randomized in blocks with 16 treatments and 3 repetitions. The treatments were compound for 15 different combinations of nutrients (N; Mg; Zn; P, N + Mg; N + Zn; N + P; Mg + Zn; Mg + P; Zn + P; N + P + Zn; N + P + Mg; N + Zn + Mg; P + Zn + Mg; N + Zn + Mg + P) alone and combined, and a control. The results were submitted to analysis of variance and Tukey test at 5% significance level. Among the treatments evaluated, the highest production of dry biomass, with both maltose and sucrose, was observed for Mg (1.60 g/L and 1.94 g/L, respectively). Additionally, another treatment that stood out in terms of biomass production was the control treatment with maltose (1.54 g/L). After the incubation time, killer activity was not observed since there was no formation of inhibition halo around the L02 yeast.(AU)

RESUMO

ABSTRACT In order for the use of biological carotenoids to become feasible, it is necessary to have adequate low cost sources and improved methods of cultivation. The aim of this study was to evaluate the effect of supplementation with nitrogen, phosphorus, zinc, and magnesium, on the biomass and carotenoid volumetric production by yeast Rhodotorula rubra L02 using a complex medium (sugarcane juice) and synthetic media (sucrose and maltose) as substrates. The experimental design used for each substrate was randomized in blocks with 16 treatments and 3 repetitions. The treatments were compound for 15 different combinations of nutrients (N; Mg; Zn; P, N + Mg; N + Zn; N + P; Mg + Zn; Mg + P; Zn + P; N + P + Zn; N + P + Mg; N + Zn + Mg; P + Zn + Mg; N + Zn + Mg + P) alone and combined, and a control. The results were submitted to analysis of variance and Tukey test at 5% significance level. Among the treatments evaluated, the highest production of dry biomass, with both maltose and sucrose, was observed for Mg (1.60 g/L and 1.94 g/L, respectively). Additionally, another treatment that stood out in terms of biomass production was the control treatment with maltose (1.54 g/L). After the incubation time, killer activity was not observed since there was no formation of inhibition halo around the L02 yeast.

Assuntos

RESUMO

In order for the use of biological carotenoids to become feasible, it is necessary to have adequate low cost sources and improved methods of cultivation. The aim of this study was to evaluate the effect of supplementation with nitrogen, phosphorus, zinc, and magnesium, on the biomass and carotenoid volumetric production by yeast Rhodotorula rubra L02 using a complex medium (sugarcane juice) and synthetic media (sucrose and maltose) as substrates. The experimental design used for each substrate was randomized in blocks with 16 treatments and 3 repetitions. The treatments were compound for 15 different combinations of nutrients (N; Mg; Zn; P, N+Mg; N+Zn; N+P; Mg+Zn; Mg+P; Zn+P; N+P+Zn; N+P+Mg; N+Zn+Mg; P+Zn+Mg; N+Zn+Mg+P) alone and combined, and a control. The results were submitted to analysis of variance and Tukey test at 5% significance level. Among the treatments evaluated, the highest production of dry biomass, with both maltose and sucrose, was observed for Mg (1.60g/L and 1.94g/L, respectively). Additionally, another treatment that stood out in terms of biomass production was the control treatment with maltose (1.54g/L). After the incubation time, killer activity was not observed since there was no formation of inhibition halo around the L02 yeast.

Assuntos

RESUMO

Os biocombustíveis apresentam-se com grande importância para suprir a demanda global de energia. São produzidos a partir de biomassa vegetal, emitem menor quantidade de dióxido de carbono e de partículas poluentes ao ambiente quando utilizados e possuem grande vantagem por serem combustíveis renováveis. Entre as matérias-primas com potencial para produção de etanol, cita-se o sorgo sacarino. Objetivou-se comparar o processamento industrial do genótipo de sorgo sacarino CVSW80007 e da cultivar de cana-de-açúcar 'RB966928' para produção de bioetanol em início de safra. As análises realizadas foram: brix; pH, ART, AR, acidez total, ARRT, glicerol, teor alcoolico, viabilidade celular, viabilidade de brotos e brotamentos. Quanto às características químico-tecnológicas, as matérias-primas apresentaram-se aptas ao processamento industrial, com índices superiores para a cana-de-açúcar. O desenvolvimento das fermentações ocorreu de forma adequada para ambas, sendo que o mosto fermentado (vinho), produzido a partir do mosto de cana-de-açúcar, apresentou maior teor alcoolico e rendimento fermentativo.(AU)

Biofuels have great importance to supply the global energy demand. These fuels are produced from plant biomass, emit less carbon dioxide and particulate pollutants to the environment when used and have great advantage of being renewable fuels. Among the raw materials with potential for ethanol production, is cited sweet sorghum. This study aimed to compare industrial processing of genotype sorghum CVSW80007 and the cultivar sugar cane 'RB966928' for bioethanol production in early season. The analyzes performed were: brix, pH, ART, AR, total acidity, ARRT, glycerol, alcohol content, cell viability, shoots viability and buds. Regarding the chemical-technological characteristics, raw materials were suitable for industrial processing, with higher rates for sugar cane. The development of fermentations occurred appropriately for both, and the fermented must (wine) produced from the must of sugar cane had higher alcohol content and fermentation yield.(AU)

Assuntos

RESUMO

Os biocombustíveis apresentam-se com grande importância para suprir a demanda global de energia. São produzidos a partir de biomassa vegetal, emitem menor quantidade de dióxido de carbono e de partículas poluentes ao ambiente quando utilizados e possuem grande vantagem por serem combustíveis renováveis. Entre as matérias-primas com potencial para produção de etanol, cita-se o sorgo sacarino. Objetivou-se comparar o processamento industrial do genótipo de sorgo sacarino CVSW80007 e da cultivar de cana-de-açúcar 'RB966928' para produção de bioetanol em início de safra. As análises realizadas foram: brix; pH, ART, AR, acidez total, ARRT, glicerol, teor alcoolico, viabilidade celular, viabilidade de brotos e brotamentos. Quanto às características químico-tecnológicas, as matérias-primas apresentaram-se aptas ao processamento industrial, com índices superiores para a cana-de-açúcar. O desenvolvimento das fermentações ocorreu de forma adequada para ambas, sendo que o mosto fermentado (vinho), produzido a partir do mosto de cana-de-açúcar, apresentou maior teor alcoolico e rendimento fermentativo.

Biofuels have great importance to supply the global energy demand. These fuels are produced from plant biomass, emit less carbon dioxide and particulate pollutants to the environment when used and have great advantage of being renewable fuels. Among the raw materials with potential for ethanol production, is cited sweet sorghum. This study aimed to compare industrial processing of genotype sorghum CVSW80007 and the cultivar sugar cane 'RB966928' for bioethanol production in early season. The analyzes performed were: brix, pH, ART, AR, total acidity, ARRT, glycerol, alcohol content, cell viability, shoots viability and buds. Regarding the chemical-technological characteristics, raw materials were suitable for industrial processing, with higher rates for sugar cane. The development of fermentations occurred appropriately for both, and the fermented must (wine) produced from the must of sugar cane had higher alcohol content and fermentation yield.