RESUMO

ABSTRACT Objective: To determine the unstimulated salivary flow, pH, and buffering capacity and their associations with systemic conditions and medication use in independently living aged. Material and Methods: This cross-sectional study included 72 participants with a minimum of 60 years recruited in Belo Horizonte, Brazil. A questionnaire was used to collect age, sex, presence of systemic diseases, and medications in continuous use. Salivary data collection was performed to determine unstimulated salivary flow, pH, and buffering capacity. Descriptive, bivariate, and multivariate analyses were performed (p<0.05). Results: Most of the sample had at least one systemic disease (81.9%) and used at least one medication (79.2%). Female participants (p=0.01), those with five or more systemic diseases (p<0.01), and hypertension (p=0.04) had reduced salivary flow. Participants with systemic diseases (p=0.02), taking any medication (p=0.04), in a polypharmacy regimen, and presenting hypertension (p=0.02) had more acidic salivary pH. Participants with diabetes had average salivary buffering capacity (p=0.02). In the adjusted multiple regression models, no explanatory variable was significantly associated with the salivary outcomes. Conclusion: Systemic alterations and medication use appear to be related to salivary changes in older adults. Integrative assessment of older adults is fundamental to identifying and controlling the factors that may modify their salivary characteristics.

Assuntos

RESUMO

INTRODUCTION: Superposing 3D models is an imminent need. However, current methods rely on marking multiple points on the maxilla and mandible, which could increase point marking and overlapping errors. OBJECTIVE: This study aimed at developing a method for superimposing 3D models of the maxillary and mandibular arches with Autodesk Inventor® engineering software, using a single universal coordinate system (UCS) point superposition. METHODS: A total of 104 STL (stereolithography) models of the maxillary and mandibular arches exported from My iTero® platform were retrospectively selected, in which T0 and T1 were the initial and refinement periods, respectively (n=26 per group). The X, Y, and Z coordinates associated with a single point in each arch were inserted into the models with SlicerCMF® software for model orientation. The arch models with UCS registration were transferred to Autodesk Inventor® for superimposition and to measure tooth movements performed during Invisalign® treatment. Arch expansion, intrusion and rotation were analyzed by two examiners. The statistics were performed using intraclass correlation coefficients (ICC), Dahlberg's formula, and t-test (p<0.05). RESULTS: A reliable method of superimposing 3D digital models using a single UCS point in the maxilla and mandible was developed. ICC showed excellent intra- and inter-examiner correlation (ICC>0.90). A systematic error was not found concerning linear and angular measurements (<1mm and <1.5°, respectively). Digital dental movements could be analyzed, including arch expansion, dental intrusion, and tooth rotation. CONCLUSIONS: The developed method was proven reliable and reproducible for superimposing 3D models of the maxillary and mandibular arches by using UCS system.

Assuntos

RESUMO

OBJECTIVES: To evaluate noncarious cervical lesions (NCCL) in older adults by analyzing each lesion's morphology, dimension, and occlusal risk factors using intraoral scanning and clinical evaluation. MATERIALS AND METHODS: Individuals over 60 treated at the School of Dentistry in Minas Gerais, Brazil, were invited to participate in this cross-sectional study. We clinically evaluated 1245 teeth for the presence of NCCL and dentin hypersensitivity (DH) in 53 individuals. Three-dimensional models were obtained using Omnicam, and occlusal risk factors were evaluated through the presence of wear facets, intense occlusal contacts, and interferences. The 3Shape 3DViewer software was used to classify NCCL morphology and to measure their height. NCCL depth, width, and area measurements were determined using ImageJ. Descriptive analyses were performed. The Kolmogorov-Smirnov test showed that quantitative data exhibited non-normal distribution. For bivariate analyses of quantitative data, the Mann-Whitney test was employed. The results were reported with mean, standard deviation, median, minimum, and maximum. For bivariate analyses of categorical data, the Pearson chi-square test was used. The results were reported with frequencies (counts) and percentages. A regression model evaluating the association between occlusal risk factors and the absence/presence of NCCL was built. RESULTS: Most participants were female (58.5%), with a mean age of 66. The frequency of NCCL was 28.27%, corresponding to 352 teeth. Of these, 68.18% exhibited saucer morphology and 31.82% wedge-shaped morphology. The frequency of DH was 13.92% in teeth with NCCL. Saucer NCCL exhibited significantly greater height (p = 0.02), while wedge-shaped lesions showed greater depth (p < 0.001). Also, teeth with NCCL had a higher proportion of wear facets (66.8%; p < 0.001), intense occlusal contacts (39.8%; p = 0.008), and occlusal interferences (21.9%; p = 0.05). The regression model showed that teeth with wear facets were 1.50 times more likely to exhibit NCCL than teeth without wear facets (p < 0.001). Teeth with intense occlusal contact were 1.22 times more likely to exhibit NCCL than teeth without intense occlusal contact (p = 0.031). CONCLUSIONS: NCCL is a common dental condition in the older adults evaluated in this study. Wedge-shaped NCCL exhibited greater depth, while saucer NCCL had more expressive height. Occlusal risk factors may represent a crucial mechanism for the occurrence of NCCL in this population. CLINICAL RELEVANCE: Understanding the mechanisms involved in developing NCCL is helpful in diagnostic and preventive practices. The study showed the importance of dental occlusion and characteristics of different NCCL morphologies that help the clinician in decision-making.

RESUMO

Oral and maxillofacial surgeons are among the frontline healthcare workers and are classified as a high-risk group for COVID-19 infection; however, it has not yet been defined how these professionals were impacted. The aim of this study was to explore the conducts and perceptions of oral and maxillofacial surgeons during the COVID-19 pandemic in Brazil. Nine individuals, mean age 34.8 years, 66.6% men, were included in the study. A semi-structured interview with a qualitative approach was applied to professionals belonging to a messaging application group (WhatsApp). Content analysis was performed in the light of Hellerian theory in its daily theoretical framework for the interpretation of the memories reported by the participants. Four themes were identified. The lack of knowledge about COVID-19 and the fear of being contaminated during care were the main factors responsible for changes in the professionals' work routine. An important point was the collective reflection of the participants about the increase in biosafety barriers, which ensured a greater sense of security. The need for social isolation to contain the virus was also described. As a result, there was a great distance between professionals and their families, which generated high levels of anxiety in the former. Repetitive reports of slowness and reduced attendance directly related to financial loss and aggravated stress were also highlighted. The findings of this study reveal that oral and maxillofacial surgeons had their professional-personal axis affected in terms of daily habits, family life and financial strain, aspects that were responsible for impacting stress and anxiety levels.

Assuntos

RESUMO

To evaluate the prevalence of untreated caries and its association with biological, individual, and environmental variables in independently-living elderly people. Methods: This cross-sectional study included 72 elderly (≥60 years) patients of a university dental clinic in Belo Horizonte, Brazil. Sociodemographic data, systemic diseases, medications, and free sugar intake were collected. Visible plaque, Decayed, Missing, and Filled Teeth (DMFT), and Decayed and Filled Root (DFR) indexes were assessed through clinical examination. Unstimulated saliva was collected to determine salivary flow, pH, and buffering capacity. Descriptive analysis and multilevel logistic regression analysis were performed following a dental caries theoretical model (p <0.05, 95% CI). Results: The mean DMFT and DFR were 24.44 (SD=4.59) and 3.21 (SD=2.93), respectively. The prevalence of untreated caries was 61.11%. In the adjusted multilevel regression model involving 1639 teeth, untreated dental caries was significantly associated with the presence of biofilm (OR = 1.84; 95% CI: 1.24­2.74), salivary buffering capacity (OR = 0.87; 95% CI: 0.77­0.99) and per capita income (OR = 0.06; 95% CI: 0.004­0.74). Conclusion: The experience of dental caries was widespread among independently-living elderly patients, and its variability was best explained by the presence of biofilm, reduced salivary buffering capacity, and low per capita income. A comprehensive assessment is needed of the biological, individual, and environmental factors related to the presence of dental caries in independently-living elderly people

Assuntos

RESUMO

ABSTRACT Introduction: Superposing 3D models is an imminent need. However, current methods rely on marking multiple points on the maxilla and mandible, which could increase point marking and overlapping errors. Objective: This study aimed at developing a method for superimposing 3D models of the maxillary and mandibular arches with Autodesk Inventor® engineering software, using a single universal coordinate system (UCS) point superposition. Methods: A total of 104 STL (stereolithography) models of the maxillary and mandibular arches exported from My iTero® platform were retrospectively selected, in which T0 and T1 were the initial and refinement periods, respectively (n=26 per group). The X, Y, and Z coordinates associated with a single point in each arch were inserted into the models with SlicerCMF® software for model orientation. The arch models with UCS registration were transferred to Autodesk Inventor® for superimposition and to measure tooth movements performed during Invisalign® treatment. Arch expansion, intrusion and rotation were analyzed by two examiners. The statistics were performed using intraclass correlation coefficients (ICC), Dahlberg's formula, and t-test (p<0.05). Results: A reliable method of superimposing 3D digital models using a single UCS point in the maxilla and mandible was developed. ICC showed excellent intra- and inter-examiner correlation (ICC>0.90). A systematic error was not found concerning linear and angular measurements (<1mm and <1.5°, respectively). Digital dental movements could be analyzed, including arch expansion, dental intrusion, and tooth rotation. Conclusions: The developed method was proven reliable and reproducible for superimposing 3D models of the maxillary and mandibular arches by using UCS system.

RESUMO Introdução: A sobreposição de modelos 3D é uma necessidade iminente. No entanto, os métodos atuais dependem da marcação de múltiplos pontos na maxila e na mandíbula, o que pode aumentar a incorporação de erros no processo de sobreposição. Objetivo: O objetivo desse estudo foi desenvolver um método para sobrepor modelos 3D das arcadas superior e inferior utilizando o software de engenharia Autodesk Inventor®, por meio da marcação de um único ponto em cada arcada, usando o sistema de coordenadas universal (UCS). Métodos: No total, 104 modelos STL das arcadas superior e inferior exportados da plataforma My iTero® foram selecionados retrospectivamente, onde T0 foi o período inicial e T1, o de refinamento (n=26 por grupo). As coordenadas X, Y e Z associadas a um único ponto em cada arcada foram inseridas nos modelos usando o software SlicerCMF®. Os modelos com os pontos UCS demarcados foram transferidos para o software Autodesk Inventor® para realizar a sobreposição e medir os movimentos dentários realizados durante o tratamento com Invisalign®. Os movimentos de expansão, intrusão e rotação foram analisados por dois examinadores. A análise estatística foi realizada usando os coeficientes de correlação intra-classe (ICC), fórmula de Dahlberg e teste t (p<0,05). Resultados: Foi desenvolvido um método confiável de sobreposição de modelos digitais 3D usando um único ponto UCS na maxila e mandíbula. O ICC apresentou excelente correlação intra e inter-avaliadores (ICC>0,90). Não foi encontrado erro sistemático nas medidas lineares e angulares (<1mm e <1,5°, respectivamente). Os movimentos dentários puderam ser analisados por meio do método proposto, incluindo expansão da arcada, intrusão e rotação dentária. Conclusão: O método desenvolvido provou ser confiável e reprodutível para sobreposição de modelos 3D das arcadas superior e inferior usando o sistema UCS com marcação de ponto único.

RESUMO

Aim: Although bulk fill composites have been widely used as restorative material, there is no consensus regarding the best clinical protocol in terms of composite technique and adhesive system. Therefore, this clinical trial evaluated the clinical performance of bulk fill composites for class I restorations under different protocols. Methods: A randomized clinical trial including 155 class I restorations was conducted using different adhesive systems: conventional technique (phosphoric acid + conventional three-step adhesive system) (Group 1, 2 and 3); or self-etching adhesive system (Groups 4, 5 and 6). Control groups 1 and 4 were restored with conventional composite; groups 2 and 5 with low viscosity bulk fill and conventional composite as occlusal coverage; groups 3 and 6 with high viscosity bulk fill. The FDI criteria was used for clinical evaluation at baseline and after 6 months. Results: All groups showed good clinical performance. At baseline, the adhesive system did not affect postoperative hypersensitivity. After 6 months, group 5 showed a significant reduction in color and translucency; group 6 a reduction in terms of anatomical form and for postoperative sensitivity and an improvement in patient satisfaction (p<0.05). Considering the same restorative technique, the use of the self-etching adhesive system showed a significant decrease in color and translucency (p<0.05). Conclusion: All groups showed favorable clinical performance, and promising results were found for the conventional adhesive system and high viscosity bulk fill protocol

Assuntos

RESUMO

OBJECTIVES: We aimed to optimize the mechanical and biological properties of a conventional methacrylate-based dental polymer by loading it with double- and triple-walled carbon nanotubes as growth (DTWCNTG). METHODS: A formulation of bisphenol A-glycidyl methacrylate and triethylene glycol dimethacrylate (mass ratio = 2:1) was mixed with DTWCNTG at concentrations of 0.0% (control), 0.001%, 0.005%, and 0.010%. The concentrations were physicochemical and morphologically evaluated, and antibacterial activity was assessed by seeding a Streptococcus mutans strain (ATCC 25175) on the experimental polymeric surfaces. Cellular survival and osteodifferentiation were evaluated in epithelial (HaCat) and preosteoblast cells (MC3T3-E1). RESULTS: The 0.001% DTWCNTG concentration yielded higher compressive strength, elastic modulus, flexural strength, flexural modulus, water sorption, and solubility than the control. The degree of conversion and color did not significantly change with a low amount of DTWCNTG incorporated into the polymer. Antibacterial activity significantly improved when tested on the 0.001% DTWCNTG discs. No groups showed cytotoxicity in a short-term analysis and adding DTWCNTG favored MC3T3-E1 mineralization over the control, particularly in the 0.001% formulation. SIGNIFICANCE: The micro-addition of 0.001% DTWCNTG confers mechanical resistance, antimicrobial properties, and bioactivity to methacrylate-based polymers without significantly compromising color. Incorporating DTWCNTG improved dental composite properties and could be a biomodified material for minimally invasive procedures.

Assuntos

RESUMO

Aim The aim of this systematic review and meta-analysis was to analyse the clinical performance of GIOMER restorative composites and compare them with other conventional restorative materials in permanent teeth.Methods Searches in PubMed, Web of Science, Scopus, Ovid and Cochrane Library were conducted. Grey literature search was also performed. Clinical trials that evaluated the clinical performance of restorations with GIOMER restorative composites in permanent teeth compared to those using composite resin, glass ionomer cement, resin-modified glass ionomer cement (RMGIC) and other GIOMERs were included. Meta-analyses comparing GIOMER restorative composites with RMGIC at 6- and 12-month follow-ups and comparing two types of GIOMER were feasible.Results Ten studies fulfilled the inclusion criteria. In these studies, GIOMER was compared to different types of dental restoration materials. Dental restorations were evaluated by United States Public Health Service criteria in all included studies. Four studies were suitable for meta-analysis, which showed significant differences between GIOMER and RMGIC surface roughness at 6-month (odds ratio [OR] = 6.56; 95% confidence interval [CI] = 2.38-18.13) and 12-month (OR = 8.76; CI = 3.19-24.07) follow-ups. No significant differences between GIOMER restorative composites and RMGIC for marginal adaptation were found at 6- and 12-month follow-ups. When comparing two GIOMERs, significant differences were seen between Beautifil II and Beautifil Flowable Plus F00 for marginal staining (OR = 2.58; CI = 1.42-23.27; I2 = 0%) and surface roughness (OR = 4.59; CI = 1.11-18.97; I2 = 0%) at the 36-month follow-up. No significant differences between Beautifil II and Beautifil Flowable Plus F00 were seen for marginal adaptation and anatomic form at 6-, 18- and 36-month follow-ups.Conclusions GIOMER restorative composites presented similar performance concerning marginal adaptation and better surface roughness when compared to RMGIC. GIOMER Beautifil II presented similar performance to GIOMER Beautifil Flow Plus F00 concerning marginal adaptation and anatomic form and worse marginal staining and surface roughness when compared to Beautifil Flowable Plus F00.

RESUMO

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.