RESUMO

A voltammetric sensor based on the electropolymerization of cobalt-poly(methionine) (Co-poly(Met)) on a glassy carbon electrode (GCE) was developed and applied for the determination of estriol by differential pulse voltammetry (DPV) for the first time. The electrochemical properties of the Co-poly(Met)/GCE were analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to characterize the polymers on the GCE surface. The deposition of the Co-poly(Met) film on the GCE surface enhanced the sensor electronic transfer. CV studies revealed that estriol exhibits an irreversible oxidation peak at +0.58 V for the Co-poly(Met)/GCE (vs. Ag/AgCl reference electrode) in 0.10 mol/L Britton-Robinson buffer solution (pH = 7.0). Different voltammetric scan rates (10-200 mV/s) suggested that the estriol oxidation on the Co-poly(Met)/GCE surface is controlled by adsorption and diffusion processes. Based on the optimized DPV conditions, the linear responses for estriol quantification were from 0.596 µmol/L to 4.76 µmol/L (R2 = 0.996) and from 5.66 µmol/L to 9.90 µmol/L (R2 = 0.994) with a limit of detection (LOD) of 0.0340 µmol/L and a limit of quantification (LOQ) of 0.113 µmol/L. The DPV-Co-poly(Met)/GCE method provided good intra-day and inter-day repeatability with RSD values lower than 5%. Also, no interference of real sample matrices was observed on the estriol voltammetric response, making the DPV-Co-poly(Met)/GCE highly selective for estriol. The accuracy test showed that the estriol recovery was in the ranges 96.7%-103% and 98.7%-102% for pharmaceutical tablets and human urine, respectively. The estriol quantification in pharmaceutical tablets performed by the Co-poly(Met)/GCE-assisted DPV method was comparable to the official analytical protocols.

RESUMO

Paclitaxel (PTX) is widely used as a first-line treatment for patients with metastatic breast cancer; however, its poor water solubility represents a major challenge for parenteral administration. The encapsulation of the PTX in drug-delivery systems with high affinity for tumor sites could improve the uptake and increase its therapeutic efficacy. In this work, long-circulating and pH-sensitive PEG-coated (SpHL-PTX) and PEG-folate-coated liposomes containing PTX (SpHL-FT-PTX) were prepared, and the physicochemical properties and in vitro cytotoxic activity were evaluated. Both formulations presented adequate physicochemical properties, including a mean diameter smaller than 200 nm, zeta potential values near the neutral range, and an encapsulation percentage higher than 93%. Moreover, SpHL-FT-PTX showed a good stability after storage for 100 days at 4 °C. The viability studies on breast cancer cell lines (MDA-MB-231 and MCF-7) demonstrated cytotoxic activity more pronounced for SpHL-FT-PTX than for SpHL-PTX or free drug for both tumor cell lines. This activity was reduced to a rate comparable to SpHL-PTX when the cells were previously treated with folic acid in order to saturate the receptors. In contrast, in the normal cell line (L929), cell viability was decreased only by free or liposomal PTX in the highest concentrations. A significantly higher selectivity index was obtained after SpHL-FT-PTX treatment compared to SpHL-PTX and free PTX. Therefore, the results of the present work suggest that SpHL-FT-PTX can be a promising formulation for the treatment of metastatic breast cancer.

Assuntos

RESUMO

Despite photocatalytic degradation is studied generally focusing the catalyst, its interaction with the contaminant molecule plays a fundamental role in the efficiency of that process. Then, we proposed a comparative study about the photodegradation of two well-known dyes, with different acidity/basicity - Methylene Blue (MB) and Rhodamine B (RhB), catalyzed by TiO2 nanoparticles, varying both dye and photocatalyst concentrations. The results showed that the amphoteric character of MB molecules, even in a range of concentration of 5.0-10.0 mg L(-1) , did not imply in pH variation in solution. Therefore, it did not affect the colloidal behavior of TiO2 nanoparticles, independent of the relative dye/catalyst concentration. The acid-base character of RhB influenced the resultant pH of the solution, implicating in different colloidal behavior of the nanoparticles and consequently, in different degradation conditions according to dye concentration. As the isoelectric point of TiO2 is between the pH range of the RhB solutions used in this study, from 1.0 to 7.5 mg L(-1) , the resultant pH was the key factor for degradation conditions, from a well dispersed to an agglomerated suspension.