RESUMO
OBJECTIVE: To evaluate the effect of the association of potassium iodide to antimicrobial photodynamic therapy on human carious dentin produced with a microcosm biofilm model. METHODS: A microcosm biofilm model was used to generate a caries lesion on human dentin. Pooled human saliva diluted with glycerol was used as an inoculum on specimens immersed on McBain artificial saliva enriched with 1 % sucrose (24 h at 37 °C in 5 % CO2). After refreshing culture media for 7 days, the dentin specimens were divided in 5 groups (3 specimens per group, in triplicate; n = 9): C (NaCl 0.9 %), CX (2 % chlorhexidine), PKI (0.01 % methylene blue photosensitizer+50 mM KI), L (laser at 15 J, 180 s, 22.7 J/cm2), and PKIL (methylene blue + KI + Laser). After the treatments, dentin was collected, and a 10-fold serial dilution was performed. The number of total microorganisms, total lactobacilli, total streptococci, and Streptococcus mutans was analyzed by microbial counts (CFU/mL). After normality and homoscedasticity analysis, the Welch's ANOVA and Dunnett's tests were used for CFU. All tests used a 5 % significance level. RESULTS: CX and PKIL groups showed significant bacterial decontamination of dentin, compared to group C (p < 0.05) reaching reductions up to 3.8 log10 for CX for all microorganisms' groups and PKIL showed 0.93, 1.30, 1.45, and 1.22 log10 for total microorganisms, total lactobacilli, total streptococci, and S. mutans, respectively. CONCLUSION: aPDT mediated by the association of KI and methylene blue with red laser reduced the viability of microorganisms from carious dentin and could be a promising option for cavity decontamination.
Assuntos
Biofilmes , Cárie Dentária , Dentina , Azul de Metileno , Fotoquimioterapia , Fármacos Fotossensibilizantes , Iodeto de Potássio , Streptococcus mutans , Humanos , Azul de Metileno/farmacologia , Azul de Metileno/uso terapêutico , Fotoquimioterapia/métodos , Cárie Dentária/microbiologia , Cárie Dentária/tratamento farmacológico , Cárie Dentária/terapia , Dentina/microbiologia , Dentina/efeitos dos fármacos , Iodeto de Potássio/farmacologia , Iodeto de Potássio/uso terapêutico , Biofilmes/efeitos dos fármacos , Streptococcus mutans/efeitos dos fármacos , Fármacos Fotossensibilizantes/uso terapêutico , Fármacos Fotossensibilizantes/farmacologia , Saliva/microbiologia , Lactobacillus/efeitos dos fármacos , Streptococcus/efeitos dos fármacos , Clorexidina/farmacologia , Clorexidina/uso terapêutico , Técnicas In Vitro , Contagem de Colônia Microbiana , Saliva Artificial , LasersRESUMO
PURPOSE: This study evaluated the effect of toothbrushing cycles on surface roughness (Ra), gloss (GU), and morphology of two zirconia finishing and polishing protocols. MATERIALS AND METHODS: An ultra-translucent zirconia disc was sectioned into rectangular plates (12 mm × 7 mm × 3 mm) and divided into two groups according to the polishing and finishing system used (diamond rubber abrasive/DRA or glazing/GLA). Bovine enamel (BEN) plates with the same dimensions were used as a Control. Specimens of zirconia and enamel were analyzed for Ra and GU (n = 11) and surface morphology by scanning electron microscopy (n = 3) before toothbrushing (baseline) and after 15,000 and 30,000 toothbrushing cycles. Ra and GU data were analyzed by ANOVA two-way and post-hoc Tukey's test (α = 0.05), while the surface morphology was analyzed qualitatively. RESULTS: The Ra decreased significantly after 30,000 toothbrushing cycles for DRA and GLA zirconia ceramics. DRA showed a higher GU at the baseline, after 15,000 and 30,000 toothbrushing cycles than GLA and BEN. Toothbrushing polished the zirconia, creating a smooth surface, while no changes were observed for BEN. CONCLUSIONS: The increase in toothbrushing cycles (30,000) changed the surface roughness of DRA and GLA zirconia ceramics. DRA zirconia presented the highest GU, which did not change with toothbrushing.
RESUMO
Abstract To evaluate the microtensile bond strength (µTBS) of two resin cements to 3D printed and milled CAD/CAM resins used for provisional fixed partial dentures. Blocks (5 x 5 x 5 mm) of three 3D-printed resins (Cosmos3DTemp / Yller; Resilab3D Temp / Wilcos and SmartPrint BioTemp, / MMTech) were printed (Photon, Anycubic Technology Co.). A milled material (VitaCAD-Temp, VITA) was used as control. Half the specimens were sandblasted and the rest were untreated. Two blocks were bonded with the corresponding resin cement: PanaviaV5 (Kuraray Noritake) and RelyX Ultimate (3M Oral Care). After 24 hours, the bonded blocks were sectioned into 1 x 1 mm side sticks. Half the beams were tested for µTBS and the other half was thermocycled (5000 cycles, 30s dwell-time, 5s transfer time) before µTBS testing. A four way Generalized Linear Model (material*sandblasting*cement*aging) analysis was applied. VITA exhibited the lowest µTBS, regardless of the cement, sandblasting and thermocycling. Sandblasting significantly improved the µTBS of VIT, especially after aging, but did not improve the µTBS of 3D printed resins. Sandblasting was not beneficial for 3D printed resins, although is crucial for adhesive cementation of milled temporary resins. Airborne particle abrasion affects the integrity of 3D-printed resins, without producing a benefit on the microtensile bond strength of these materials. However, sandblasting is crucial to achieve a high bond strength on milled temporary resins.
Resumen Evaluar la resistencia adhesiva en microtracción (µTBS) de dos cementos resinosos a resinas CAD/CAM impresas y fresadas indicadas para restauraciones provisionales. Bloques (5 x 5 x 5mm) de tres resinas impresas (Cosmos3DTemp / Yller; Resilab3D Temp / Wilcos and SmartPrint BioTemp, / MMTech) y una resina fresada (VitaCAD-Temp, VITA) fueron fabricados. La mitad de los especímenes fueron arenados y el resto no recibió tratamiento mecánico. Dos bloques con condiciones de tratamiento iguales fueron cementados con cemento resinoso (PanaviaV5 / Kuraray Noritake y RelyX Ultimate / 3M Oral Care). Después de 24 horas los bloques fueron seccionados en palitos de 1 mm² de área. En la mitad de los especímenes se midió la TBS inmediatamente y el resto fue termociclado (5000 ciclos, 30s remojo, 5s transferencia) antes de la prueba de TBS. Se aplica un análisis estadístico por Modelo Linear General con 4 factores (material*arenado*cemento*termociclado). La resina VITA presentó la menor µTBS, independientemente del cemento usado, el arenado y el termociclado. Sin embargo, el arenado aumentó la µTBS de VIT, especialmente después del termociclado. Por otro lado, el arenado no resultó en un aumento significativo de la µTBS de las resinas impresas. El arenado no fue beneficiosos para las resinas impresas, aunque es un paso crucial para la cementación adhesive de las resinas fresadas. El arenado afecta la integridad de las capas de las resinas impresas, sin generar un beneficio en la TBS.
Assuntos
Desenho Assistido por Computador/instrumentação , Cimentos de Resina/uso terapêutico , Cemento Dentário , Impressão Tridimensional/instrumentaçãoRESUMO
Early gastric cancer is defined as gastric cancer confined to the mucosa or submucosa, irrespective of lymph node metastasis. Endoscopic submucosal dissection is a standard treatment of early gastric cancer. The nonextension sign consists of a protrusion of the surrounding mucosa into the lumen, resembling a trapezoidal shape. This phenomenon occurs when massive submucosal invasion by a cancer increases the thickness and rigidity of the gastric wall and may be useful to differentiate between mucosal or microinvasive submucosal and invasive submucosal cancers. Our case demonstrates the usefulness of the absence of the conventional endoscopic nonextension sign as a marker to decide the adequate approach for mucosal lesions.
RESUMO
OBJECTIVE: Evaluate the effect of thickness of high-translucency (HT) CAD/CAM materials on irradiance and beam profile from a blue light-emitting diode light-curing unit (LCU) and on the degree of conversion (DC) and maximum polymerization rate (Rpmax ) of a light-cured resin cement (LCC). MATERIAL AND METHODS: The direct output from the LCU, the light transmission and irradiance ratio (IR) through one conventional composite and nine HT CAD/CAM materials (0.5, 1.0, 1.5, or 2.0-mm thick; n = 5) were measured with a integrating sphere coupled to a spectrometer. The light beam was assessed with a beam profiler camera. The DC at 600 s and the Rpmax of one LCC was determined using a Fourier transform infrared spectrometer (n = 5). Data were analyzed by ANOVA followed by Tukey's tests, and Dunnett's test was also used for irradiance data (α = 0.05). RESULTS: A significant decrease in irradiance through all materials occurred as thickness increased. Thin CAD/CAM materials improved light homogeneity, which decreased with the increase in thickness. The DC of the LCC directly exposed to light was the same as when exposed to 45%, 25%, 15%, or 5% IRs. Rpmax decreased with the decrease in IR. CONCLUSIONS: Although the HT CAD/CAM materials reduced the irradiance from the LCU, minor effects were observed in the LCC's DC. CLINICAL SIGNIFICANCE: Despite the light attenuation of blue light through different CAD/CAM materials that were up to 2-mm thick, the degree of conversion of one brand of light-cured resin cement was clinically acceptable when the LCU was used for 30 s.
Assuntos
Lâmpadas de Polimerização Dentária , Cimentos de Resina , Polimerização , Cura Luminosa de Adesivos Dentários , Teste de Materiais , Propriedades de Superfície , Resinas CompostasRESUMO
Introduction: Infection by the hepatitis C virus (HCV) is an important cause of chronic liver disease, considered a public health problem worldwide with high morbidity and mortality due to limited access to diagnostic tests in developing countries. Only a small percentage know their infection status and receive timely treatment. It is critical to make diagnostic tests for HCV infection accessible and to provide timely treatment, which not only reduces the spread of infection but also stops the progression of HCV disease without symptoms. Objective: To determine the prevalence of chronic infection by HCV in patients with risk factors by using rapid tests in Cartagena, Colombia, and describe their epidemiological characteristics. Methodology: A cross-sectional descriptive observational study was carried out on asymptomatic adults with risk factors for HCV infection in the city of Cartagena between December 2017 and November 2019. A rapid immunochromatographic test was performed to detect antibodies, characterizing the population. Results: In total, 1,023 patients were identified who met the inclusion criteria, 58.5% women and 41.4% men, obtaining nine positive results, confirming chronic infection with viral load for HCV, finding seven cases of genotype 1b and two genotype 1a. Conclusion: In our study, a prevalence of hepatitis C infection of 0.9% was found in asymptomatic individuals with risk factors, which allows us to deduce that the active search for cases in risk groups constitutes a pillar for the identification of the disease, the initiation of antiviral therapy, and decreased morbidity and mortality.
RESUMO
OBJECTIVES: To evaluate the influence of dentin pretreatments on the push-out bond strength (POBS) of self-adhesive resin cements (SARCs) to radicular dentin. MATERIALS AND METHODS: Two experimental pretreatments (2.5% titanium tetrafluoride (TiF4 ) and 26% polyacrylic acid (PA)) and two SARCs: Maxcem Elite (MAX) and Calibra Universal (CAL) were used. For each cement, a control group was applied as indicated by the manufacturer. Sixty bovine incisors were restored (n = 10) and subjected to POBS evaluation. Failure mode, adhesive interface and surface morphology were analyzed by a Scanning Electron Microscopy (SEM) and resin infiltration was performed by confocal laser scanning microscopy (CLSM). Data for POBS and CLSM were analyzed by three-way ANOVA and Bonferroni post-hoc (α = 0.05). RESULTS: For MAX, both experimental pretreatments resulted in increased POBS in the cervical third, and for CAL, only the PA resulted in higher POBS in the cervical third. The most failures occurred between the dentin and the resin cement, except when TiF4 was applied. For PA, analysis of surface morphology showed open dentinal tubules, while TiF4 presented particle agglomerates. SEM and CLSM images confirmed presence of resin tags for both pretreatments. CONCLUSION: Pretreating radicular dentin with PA and TiF4 solutions improves the bond strength of SARCs.
Assuntos
Colagem Dentária , Cimentos de Resina , Animais , Bovinos , Colagem Dentária/métodos , Cimentos Dentários/química , Análise do Estresse Dentário , Dentina , Adesivos Dentinários/química , Teste de Materiais , Cimentos de Resina/química , Propriedades de SuperfícieRESUMO
During 1991, in Brazil, the presence of the exotic Bemisia tabaci B mitotype was reported in São Paulo state. However, the duration from the time of initial introduction to population upsurges is not known. To investigate whether the 1991 B mitotype outbreaks in Brazil originated in São Paulo or from migrating populations from neighboring introduction sites, country-wide field samples of B. tabaci archived from 1989-2005 collections were subjected to analysis of mitochondrial cytochrome oxidase I (mtCOI) and nuclear RNA-binding protein 15 (RP-15) sequences. The results of mtCOI sequence analysis identified all B. tabaci as the NAFME 8 haplotype of the B mitotype. Phylogenetic analyses of RP-15 sequences revealed that the B mitotype was likely a hybrid between a B type parent related to a haplotype Ethiopian endemism (NAFME 1-3), and an unidentified parent from the North Africa-Middle East (NAF-ME) region. Results provide the first evidence that this widely invasive B mitotype has evolved from a previously undocumented hybridization event. Samples from Rio de Janeiro (1989) and Ceará state (1990), respectively, are the earliest known B mitotype records in Brazil. A simulated migration for the 1989 introduction predicted a dispersal rate of 200-500 km/year, indicating that the population was unlikely to have reached Ceará by 1990. Results implicated two independent introductions of the B mitotype in Brazil in 1989 and 1990, that together were predicted to have contributed to the complete invasion of Brazil in only 30 generations.
RESUMO
OBJECTIVES: This study characterized a violet LED light (V-LED; bright max whitening) tooth whitening device and evaluated its efficacy on stained enamel compared to hydrogen peroxide (HP). MATERIALS AND METHODS: Characterization of the V-LED beam profile was performed using a laser beam-profiler. The irradiance was measured throughout an exposure cycle at 0- and 8-mm distances using an integrating sphere and a spectral radiometer. Bovine enamel/dentin blocks stained with black tea (BT), cigarette smoke (CS), or without staining (CONT) were subjected to V-LED or 40% HP (n = 10/group). Color parameters (ΔL, Δa, Δb, and ΔE00) were measured using a digital spectrophotometer. Light transmission was estimated through 1-mm-thick bovine enamel slices (n = 5). ΔL, Δb, ΔE00, and irradiance were analyzed by two-way ANOVAs and Tukey's tests, Δa by Kruskal-Wallis and Mann-Whitney tests, and light transmission by t-test (α = 5%). RESULTS: Heterogeneous beam distribution was observed for the emitting V-LED chips. After 20 sequential exposures, irradiance levels were reduced 25-50%, regardless of the distance from V-LED. Localized irradiance values were statistically different between beam locations and different distances from the target. V-LED produced lower ΔE00, ΔL, Δa, and Δb values than HP for CONT and BT, with no differences for CS. Light transmittance decreased approximately 98% through 1-mm thick enamel. CONCLUSIONS: V-LED irradiance was heterogeneous and decreased throughout the exposure cycles and was also greatly reduced with increasing tip distance. V-LED produced a significantly lower whitening effect on BT and control teeth. CLINICAL RELEVANCE: This study contributes to the knowledge of V-LED and its clinical use.