RESUMO

PURPOSE: To introduce a computational tool for peri-interventional intracranial aneurysm treatment guidance that maps preoperative planning information from simulation onto real-time X-Ray imaging. METHODS: Preoperatively, multiple flow diverter (FD) devices are simulated based on the 3D mesh of the vessel to treat, to choose the optimal size and location. In the peri-operative stage, this 3D information is aligned and mapped to the continuous 2D-X-Ray scan feed from the operating room. The current flow diverter position in the 3D model is estimated by automatically detecting the distal FD marker locations and mapping them to the treated vessel. This allows to visually assess the possible outcome of releasing the device at the current position, and compare it with the one chosen pre-operatively. RESULTS: The full pipeline was validated using retrospectively collected biplane images from four different patients (5 3D-DSA datasets in total). The distal FD marker detector obtained an average F1-score of 0.67 ( ± 0.224 ) in 412 2D-X-Ray scans. After aligning 3D-DSA + 2D-X-Ray datasets, the average difference between simulated and deployed positions was 0.832 mm ( ± 0.521 mm). Finally, we qualitatively show that the proposed approach is able to display the current location of the FD compared to their pre-operatively planned position. CONCLUSIONS: The proposed method allows to support the FD deployment procedure by merging and presenting preoperative simulation information to the interventionists, aiding them to make more accurate and less risky decisions.

RESUMO

This study presents the design and development of an ultrasonic sensor as a fundamental tool for characterizing the properties of fluids and biofluids. The analysis primarily focuses on measuring the electrical parameters of the system, which correlate with the density and viscosity of the solutions, in sample volumes of microliters and with high temporal resolution (up to 1 data point per second). The use of this sensor allows the fast and non-destructive evaluation of the viscosity and density of fluids deposited on its free surface. The measurements are based on obtaining the impedance versus frequency curve and the phase difference curve (between current and voltage) versus frequency. In this way, characteristic parameters of the transducer, such as the resonance frequency, phase, minimum impedance, and the quality factor of the resonant system, can characterize variations in density and viscosity in the fluid under study. The results obtained revealed the sensor's ability to identify two parameters sensitive to viscosity and two parameters sensitive to density. As a proof of concept, the unfolding of the bovine albumin protein was studied, resulting in a curve that reflects its unfolding kinetics in the presence of urea.

Assuntos

RESUMO

During follow-up of patients treated with WEB devices, shape changes have been observed. The quantitative three-dimensional measurement of the WEB shape modification (WSM) would offer useful information to be studied in association with the anatomical results and try to better understand mechanisms implicated in this modification phenomenon. We present a methodology to quantify the morphology and position of the WEB device in relation to the vascular anatomy. Three-dimensional rotational angiography (3DRA) images of seven aneurysms patients treated with WEBs were used, which also accompanied by a post-treatment 3DRA image and a follow-up 3DRA image. The device was manually segmented, obtaining the 3D models after treatment and at the follow-up. Volume, surface area, height, maximum diameter and WSM ratio of both surfaces were calculated. Position changes were evaluated measuring WEB axis and relative position between post-treatment and follow-up. Changes in WEB volume and surface area were observed with a mean modification of - 5.04 % ( ± 14.19 ) and - 1.68 % ( ± 8.29 ) , respectively. The positional variables also showed differences, mean change of device axis direction was 26.25 % ( ± 24.09 ) and mean change of distance l b was 5.87 % ( ± 10.59 ) . Inter-observer and intra-observer variability analyses did not show differences (ANOVA p > 0.05 ). This methodology allows quantifying the morphological and position changes suffered by the WEB device after treatment, offering new information to be studied in relation to the occurrence of WEB shape modification.

Assuntos

RESUMO

MOTIVATION: Intra-saccular devices (ID), developed for the treatment of bifurcation aneurysms, offer new alternatives for treating complex terminal and bifurcation aneurysms. In this work, a complete workflow going from medical images to post-treatment CFD analysis is described and used in the assessment of a concrete clinical problem. MATERIALS AND METHODS: Two different intra-saccular device sizes were virtually implanted in 3D models of the patient vasculature using the ID-Fit method. After deployment, the local porosity at the closed end of the device in contact with the blood flow was computed. This porosity was then used to produce a CFD porous medium model of the device. Velocities and wall shear stress were assessed for each model. RESULTS: Six patients treated with intra-saccular devices were included in this work. For each case, 2 different device sizes were virtually implanted and 3 CFD simulations were performed: after deployment simulation with each size and before deployment simulation (untreated). A visible reduction in velocities was observed after device implantation. Velocity and WSS reduction was statistically significant (K-S statistics, [Formula: see text]). CONCLUSIONS: Placement of different device size can lead to a partial filling of the aneurysm, either at the dome or at the neck, depending on the particular positioning by the interventionist. The methodology used in this work can have a strong clinical impact, since it provides additional information in the process of device selection using preoperative data.

Assuntos

RESUMO

The accurate characterization of proteins in both their native and denatured states is essential to effectively understand protein function, folding and stability. As a proof of concept, a micro rheological method is applied, based on the characterization of thermal fluctuations of a micro cantilever immersed in a bovine serum albumin solution, to assess changes in the viscosity associated with modifications in the protein's structure under the denaturant effect of urea. Through modeling the power spectrum density of the cantilever's fluctuations over a broad frequency band, it is possible to implement a fitting procedure to accurately determine the viscosity of the fluid, even at low volumes. Increases in viscosity during the denaturant process are identified using the assumption that the protein is a hard sphere, with a hydrodynamic radius that increases during unfolding. This is modeled accordingly through the Einstein-Batchelor formula. The Einstein-Batchelor formula estimates are verified through dynamic light scattering, which measures the hydrodynamic radius of proteins. Thus, this methodology is proven to be suitable for the study of protein folding in samples of small size at vanishing shear stresses.

Assuntos

RESUMO

This paper demonstrates that it is possible to trap and release a super paramagnetic micro bead by fixing three super paramagnetic micro beads in a triangular array at the sensitive end of a micro cantilever, and by simply switching on/off an external magnetic field. To provide evidence of this principle we trap a micro bead that is attached to the free end of single DNA molecule and that has been previously fixed at the other end to a glass surface, using the standard sample preparation protocol of magnetic tweezers assays. The switching process is reversible which preserves the integrity of the tethered molecule, and a local force applied over the tethered bead excludes the neighbouring beads from the magnetic trap. We have developed a quadrature phase interferometer which is able to perform under fluid environments to accurately measure small deflections, which permits the exploration of DNA elasticity. Our results agree with measurements from magnetic tweezer assays performed under similar conditions. Furthermore, compared to the magnetic tweezer methodology, the combination of the magnetic trap with a suitable measurement system for cantilever deflection, allows for the exploration of a wide range of forces using a local method that has an improved temporal resolution.

Assuntos

RESUMO

We study experimentally the interaction between two solitary waves that approach one another in a linear chain of spheres interacting via the Hertz potential. When these counterpropagating waves collide, they cross each other and a phase shift in respect to the noninteracting waves is introduced as a result of the nonlinear interaction potential. This observation is well reproduced by our numerical simulations and is shown to be independent of viscoelastic dissipation at the bead contact. In addition, when the collision of equal amplitude and synchronized counterpropagating waves takes place, we observe that two secondary solitary waves emerge from the interacting region. The amplitude of the secondary solitary waves is proportional to the amplitude of incident waves. However, secondary solitary waves are stronger when the collision occurs at the middle contact in chains with an even number of beads. Although numerical simulations correctly predict the existence of these waves, experiments show that their respective amplitudes are significantly larger than predicted. We attribute this discrepancy to the rolling friction at the bead contact during solitary wave propagation.