RESUMO

Melanoma is the most dangerous form of skin cancer, with an abrupt growth of its incidence over the last years. It is extremely resistant to traditional treatments such as chemotherapy and radiotherapy, but therapies for this cancer are gaining attention. Photodynamic therapy (PDT) is considered an effective modality to treat several types of skin cancers and can offer the possibility to treat one of the most aggressive ones: melanoma. In this work, the effect of PDT on a melanotic cell line (B16F10 cells) was assessed by exposing cultured cells to 5,10,15-tris(pentafluorophenyl)-20-(4-pyridyl)porphyrin (PS1) and to its chlorin (PS2) and isobacteriochlorin (PS3) corresponding derivatives and red LED light (λ = 660 ± 20 nm). The PDT effect in the cells' viability was measured using the MTT assay. The cell apoptosis was quantified by flow cytometry, and the subcellular localization of the photosensitizer was determined by fluorescence microscopy. In addition, the ability of PS2 to generate superoxide radicals was qualitatively assessed by tyrosine nitration. The results show that the efficiency of the PDT process is dependent on the structure of the PS and on their ability to produce singlet oxygen. Besides that, the photoactivation efficiency is highly dependent on the cellular sublocalization of the PS and on its cellular uptake and singlet oxygen production. We also found that the resistant cell line B16F10 has distinctive chlorin, isobacteriochlorin, or porphyrin-specific resistance profiles. Furthermore, it is shown that the highly fluorescent chlorin derivative PS2 can also be considered in imaging diagnostics.

Assuntos

RESUMO

This paper reports the use of two layered hydroxide salts (LHS) (zinc hydroxide nitrate - ZHN - Zn5(OH)8(NO3)2·2H2O, and zinc hydroxide chloride - ZHC - Zn5(OH)8Cl2·H2O) as catalysts for brilliant green (BG) organic dye bleaching, using hydrogen peroxide as oxidant. The LHS were prepared by precipitation reaction between an aqueous solution of zinc salts and an aqueous ammonia solution. The solids were characterized by powder X-ray diffraction (XRD), electron paramagnetic resonance (EPR), ultraviolet-visible electronic spectroscopy (UV-Vis) and Fourier-transform infrared spectroscopy (FTIR). The catalytic activity of the solids was investigated at temperatures of 25, 35 and 45 °C, using different molar ratios of oxidant:dye:Zn2+ ions (present in the catalyst), in the absence and presence of ambient light. The kinetic aspect of the reaction was investigated considering that the reaction showed pseudo-first order behavior in relation to BG dye concentration. We propose a mechanism where superoxide radicals account for most of the bleaching taking place. The catalytic results obtained, along with the low cost and low toxicity of zinc compounds, establish ZHN and ZHC as novel catalysts for dye wastewater treatment, an area with constant demand for new methods and materials given its relationship with environmental equilibrium and human health.

RESUMO

Complexes of porphyrins and of other similar tetrapyrrolic macrocycles are extensively explored as catalysts for different chemical processes, and the development of solid catalysts for heterogeneous processes using molecules with the ability to act as multifunctional catalysts in one-pot reactions is increasing and can lead to the wider use of this class of molecules as catalysts. This mini review focuses on the application of this class of complexes as catalysts in a variety of sequential one-pot reactions.

Assuntos

RESUMO

Several functional hybrid materials have been reported as immobilized porphyrin derivatives in various organic and inorganic host materials (polymers, mineral clays, silica, etc.), with potential applications in various fields, such as photochemistry, electrochemistry and heterogeneous catalysis. Layered double hydroxides (LDHs), commonly known as hydrotalcite-like materials, have also been analyzed for use as supports for metallocomplexes. Recently, nanocomposite materials with a core-shell structure produced by combining two kinds of nanometer-size materials have received considerable attention, since the use of these materials is a promising strategy to prevent the aggregation and self-oxidation of molecules, reducing the catalytic activity. In this study, monodispersed hierarchical layered double hydroxides on silica spheres (LDH@SiO2) with core-shell structures were developed for metalloporphyrin immobilization and the materials were used as the oxidant catalysts of different substrates.

RESUMO

Nitrate-intercalated Mg-Al layered double hydroxides (LDHs) were synthesized and exfoliated in formamide. Reaction of the single layer suspension with thiosalicylic acid under different conditions afforded two types of solids: LDHA1, in which the outer surface was modified with the anion thiosalicylate, and LDHA2, which contained the anion thiosalicylate intercalated between the LDH layers. LDHA1 and LDHA2 were used as supports to immobilize neutral (FeP1 and FeP2) and anionic (FeP3) iron(III) porphyrins. For comparison purposes, the iron(III) porphyrins (FePs) were also immobilized on LDH intercalated with nitrate anions obtained by the co-precipitation method. Chemical modification of LDH facilitated immobilization of the FePs through interaction of the functionalizing groups in LDH with the peripheral substituents on the porphyrin ring. The resulting FePx-LDHAy solids were characterized by X-ray diffraction (powder) and UV-Vis and EPR spectroscopies and were investigated as catalysts in the oxidation of cyclooctene and cyclohexane. The immobilized neutral FePs and their homogeneous counterparts gave similar product yields in the oxidation of cyclooctene, suggesting that immobilization of the FePs on the thiosalicylate-modified LDHs only supported the catalyst species without interfering in the catalytic outcome. On the other hand, in the oxidation of cyclohexane, the thiosalicylate anions on the outer surface of LDHA1 or intercalated between the LDHA2 layers influenced the catalytic activity of FePx-LDHAy, leading to different efficiency and selectivity results. FeP1-LDHA2 performed the best (29.6% alcohol yield) due to changes in the polarity of the surface of the support and the presence of FeP1. Interestingly, FeP1 also performed better in solution as compared to the other FePs. Finally, it was possible to recycle FeP1-LDHA2 at least three times.

RESUMO

Layered materials are a very interesting class of compounds obtained by stacking of two-dimensional layers along the basal axis. A remarkable property of these materials is their capacity to interact with a variety of chemical species, irrespective of their charge (neutral, cationic or anionic). These species can be grafted onto the surface of the layered materials or intercalated between the layers, to expand or contract the interlayer distance. Metalloporphyrins, which are typically soluble oxidation catalysts, are examples of molecules that can interact with layered materials. This work presents a short review of the studies involving metalloporphyrin immobilization on two different anionic exchangers, Layered Double Hydroxides (LDHs) and Layered Hydroxide Salts (LHSs), published over the past year. After immobilization of anionic porphyrins, the resulting solids behave as reusable catalysts for heterogeneous oxidation processes. Although a large number of publications involving metalloporphyrin immobilization on LDHs exist, only a few papers have dealt with LHSs as supports, so metalloporphyrins immobilized on LHSs represent a new and promising research field. This work also describes new results on an anionic manganese porphyrin (MnP) immobilized on Mg/Al-LDH solids with different nominal Mg/Al molar ratios (2:1, 3:1 and 4:1) and intercalated with different anions (CO3(2-) or NO3(-)). The influence of the support composition on the MnP immobilization rates and the catalytic performance of the resulting solid in cyclooctene oxidation reactions will be reported.

Assuntos

RESUMO

The synthetic versatility and the potential application of metalloporphyrins (MP) in different fields have aroused researchers' interest in studying these complexes, in an attempt to mimic biological systems such as cytochrome P-450. Over the last 40 years, synthetic MPs have been mainly used as catalysts for homogeneous or heterogeneous chemical reactions. To employ them in heterogeneous catalysis, chemists have prepared new MP-based solids by immobilizing MP onto rigid inorganic supports, a strategy that affords hybrid inorganic-organic materials. More recently, materials obtained by supramolecular assembly processes and containing MPs as building blocks have been applied in a variety of areas, like gas storage, photonic devices, separation, molecular sensing, magnets, and heterogeneous catalysis, among others. These coordination polymers, known as metal-organic frameworks (MOFs), contain organic ligands or complexes connected by metal ions or clusters, which give rise to a 1-, 2- or 3-D network. These kinds of materials presents large surface areas, Brønsted or redox sites, and high porosity, all of which are desirable features in catalysts with potential use in heterogeneous phases. Building MOFs based on MP is a good way to obtain solid catalysts that offer the advantages of bioinspired systems and zeolitic materials. In this mini review, we will adopt a historical approach to present the most relevant MP-based MOFs applicable to catalytic reactions such as oxidation, reduction, insertion of functional groups, and exchange of organic functions.

Assuntos

RESUMO

A family of anionic iron(III) porphyrins (FePor) was immobilized onto zinc oxide (ZnO) obtained by the in situ hydrothermal decomposition of zinc hydroxide nitrate, a layered hydroxide salt. The immobilization probably occurred via the interaction between the anionic charges on the porphyrins and the positively charged surface of the ZnO, in slightly acidic to neutral pH. The resulting solids were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRDP), Fourier transform infrared spectroscopy (FTIR), electron paramagnetic resonance (EPR), and ultraviolet-visible spectroscopy (UV-Vis) (solid samples), which confirmed the formation of ZnO and the immobilization of the FePor. The prepared materials were employed as catalysts for the heterogeneous catalytic oxidation of cyclooctene, cyclohexane, and n-heptane, using iodosylbenzene as the oxygen donor. Good catalytic results were achieved for all the substrates, and selectivity for the alcohol was verified during the oxidation of alkanes. The reuse capacity of the solid catalyst was also investigated.

Assuntos

RESUMO

Raw kaolinite was modified with triethanolamine (TEA), in an attempt to create a new support for the immobilization of metalloporphyrins. Anionic metalloporphyrins containing Fe(3+) or Mn(3+) as metallic centers were immobilized on the prepared support, and the obtained solids were characterized by Fourier-transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRPD), thermal analysis (thermogravimetric and differential thermal analyses--TGA/DTA), and scanning electron microscopy (SEM). The solids were used in heterogeneous oxidation catalysis of cyclooctene and cyclohexane. The yields from the oxidation of cyclooctene depended on the amount of TEA and/or water present in the solids. Good reaction yields were obtained for the oxidation of cyclohexane, with selectivity for the alcohol. In one specific case, a possible co-catalytic activity was verified for TEA during the oxidation of cyclohexane.

Assuntos

RESUMO

The preparation, characterization, and application in oxidation reactions of new biomimetic catalysts are reported. Brazilian Sao Simao kaolinite clay has been functionalized with [meso-tetrakis(pentafluorophenyl)porphinato]iron(III), Fe(TPFPP). To obtain the functionalized clay, the natural clay was purified by dispersion-sedimentation, expanded by insertion of dimethyl sulfoxide (DMSO), and functionalized with amino groups by substitution of DMSO with ethanolamine. These previous steps allowed clay functionalization with Fe(TPFPP), leading to a layered material with a basal spacing of 10.73 A. Clay functionalization with the porphyrin was confirmed by formation of the secondary amine, as demonstrated by FTIR bands at 3500-3700 cm(-1). UV-vis spectroscopy revealed a red shift in the Soret band of the iron porphyrin in the functionalized material as compared to the parent iron porphyrin catalyst in solution, indicating Fe(III)P --> Fe(II)P reduction. The catalytic performance of the functionalized clay was evaluated in the epoxidation of cyclooctene, with complete selectivity for the epoxide (100% epoxide yield), and ketonization of cyclohexane, cyclohexanone being the major product. The novel catalyst was also evaluated in the Baeyer-Villiger (BV) oxidation of cyclohexanone, with 85% conversion of cyclohexanone in epsilon-caprolactone, with total selectivity to epsilon-caprolactone.