RESUMO

O arco ortodôntico representa o elemento ativo do tratamento e é o principal responsável pela movimentação dentária induzida. O objetivo deste trabalho foi apresentar uma sequência de fios ortodônticos a ser utilizada durante a fase inicial, intermediária e final do tratamento com aparelhos fixos e os critérios a serem observados na seleção destes arcos (AU)

The orthodontic archwire represents the active element for treatment, and it is the main responsible for induced tooth movement. This study aims to present a sequence of orthodontic wires to be used in the early, intermediate and final phases of fixed appliance therapy as well as the criteria to be observed in the selection of these archwires (AU)

Assuntos

RESUMO

PURPOSE: To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. METHODS: A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. RESULTS: There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. CONCLUSION: Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

Assuntos

RESUMO

ABSTRACT Purpose To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. Methods A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. Results There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. Conclusion Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

RESUMO Objetivo comparar a pressão máxima anterior e posterior da língua, a resistência da língua e a pressão labial em indivíduos com más oclusões Classe I, II e III e diferentes tipos faciais. Método foi realizado um estudo analítico observacional transversal em 55 indivíduos (29 homens e 26 mulheres) com idades entre 18 e 55 anos. Os participantes foram divididos em grupos de acordo com a classificação de Angle para má oclusão (Classe I, II e III) e tipo facial. A pressão máxima anterior e posterior da língua, a resistência da língua e a pressão máxima dos lábios foram medidas usando o IOPI (Iowa Oral Performance Instrument). Para determinar o tipo facial, a análise cefalométrica foi realizada utilizando como referência a análise Ricketts VERT. Resultados não houve diferença estatisticamente significativa ao comparar a pressão máxima das regiões anterior e posterior da língua, a pressão máxima dos lábios ou a resistência da língua nos diferentes tipos de má oclusão. A pressão máxima posterior da língua foi menor em indivíduos com tipo facial vertical do que nos indivíduos mesofaciais. Conclusão a pressão de língua e lábios, assim como a resistência de língua em adultos não foi associada ao tipo de má oclusão. No entanto, existe uma associação entre o tipo facial e a pressão posterior da língua.

RESUMO

Resumo O propósito deste estudo foi comparar a magnitude de torque de fios retangulares de níquel titânio (NiTi) estéticos e convencionais submetidos aos testes de torção. Foram testados fios comerciais de NiTi pré-contornados estéticos e convencionais de 4 marcas comerciais (American Orthodontics, Eurodonto, Orthometric e TP Orthodontics) de secção transversal 0.016" x 0.022". Os testes foram realizados em máquina de torção com rotação de 0° a 90° e foi analisado o comportamento na desativação em 20° e no torque máximo a 90°. Aos 20° no descarregamento, os fios estéticos e convencionais da American Orthodontics tiveram maior expressão de torque, enquanto os fios da Eurodonto convencional e TP Orthodontics estético apresentaram menor torque. No torque máximo a 90°, os fios que tiveram maior expressão foram da TP Orthodontics convencional e American Orthodontics estético, e os fios de menor torque foram da Eurodonto convencional e Orthometric estético. Não foram encontradas diferenças estatisticamente significativas quando os fios estéticos foram comparados entre si. Ao comparar fios estéticos e convencionais de mesma marca comercial, a única que apresentou diferença estatisticamente significativa foi a Eurodonto. Concluiu-se que, quando comparados os torques dos fios estéticos e convencionais de mesma marca, não foram encontradas diferenças estatisticamente significativas, exceto o da marca Eurodonto, que apresentou menor torque para os fios convencionais. (AU)

Abstract The purpose of this study was to compare the torque magnitude of aesthetic and conventional nickel titanium (NiTi) rectangular wires subjected to torsion tests. Commercial esthetic and conventional pre-contoured NiTi wires from 4 brands (American Orthodontics, Eurodonto, Orthometric, and TP Orthodontics) with a cross-section of 0.016" x 0.022" were tested. The tests were carried out in a torsion machine with rotation from 0º to 90° and the behavior in deactivation at 20° and at a maximum torque at 90° was analyzed. At 20° in unloading, American Orthodontics esthetic and conventional wires had higher torque, while conventional Eurodonto and TP Orthodontics esthetic wires had lower torque. At maximum torque (90°), the wires that had the highest torque were conventional TP Orthodontics and aesthetic American Orthodontics, and the wires with the lowest torque were conventional Eurodonto and aesthetic Orthometric. No statistically significant differences were found when the aesthetic threads were compared to each other. When comparing aesthetic and conventional wires from the same brand, the only one that showed a statistically significant difference was Eurodonto. It was concluded that, when comparing the torques of the aesthetic and conventional wires of the same brand, no statistically significant differences were found, except for the Eurodonto brand, which presented lower torque for the conventional wires. (AU)

Assuntos

RESUMO

Resumo O tratamento compensatório da má oclusão de Classe III esquelética representa uma opção para pacientes adultos que não desejam se submeter ao tratamento ortodôntico-cirúrgico e desejam melhorias na oclusão e estética facial. O sucesso do tratamento compensatório da má oclusão de Classe III depende de um correto diagnóstico e planejamento de tratamento que considere a gravidade das discrepâncias verticais e anteroposteriores e o padrão de crescimento do paciente. O objetivo deste estudo é apresentar o tratamento de um paciente adulto com má oclusão esquelética moderada de Classe III e protrusão mandibular tratada com ancoragem esquelética e sliding jig ancorado em mini implantes e elásticos intermaxilares de Classe III. Os resultados alcançados levaram a uma melhora significativa no perfil do paciente com a estética do sorriso. Relações de molares e caninos de Classe I foram alcançadas. O sucesso na correção da discrepância oclusal anteroposterior e a correção estética de uma má oclusão de Classe III através do tratamento compensatório com elásticos de Classe III e mini implantes podem ser alcançados se a adesão do paciente for satisfatória. (AU)

Abstract Compensatory treatment of skeletal Class III malocclusion represents an option for adult patients who do not want to undergo orthodontic-surgical treatment and wish occlusion and facial aesthetics improvements. The success of the compensatory treatment of Classe III malocclusion depend on a correct diagnosis and treatment planning that considers the severity of vertical and anteroposterior discrepancies and the patient growth pattern. The aim of this study is to present the treatment of an adult patient with moderate skeletal Class III malocclusion and mandibular protrusion treated with skeletal anchorage whit miniscrew-anchored sliding jig and Class III intermaxillary elastics. The results achieved led to a significant improvement in the patient profile whit smiles esthetics. Class I molar and canine relationships were achieved. Successful on the correction of the anteroposterior occlusal discrepancy and esthetic correction of a Class III malocclusion through compensatory treatment with Class III elastics and miniscrew can be achieved if patient's compliance is satisfactory. (AU)

Assuntos

RESUMO

Resumo A automedicação, uma conduta realizada pelos pacientes com o objetivo de aliviar alguns sintomas de desconforto, é extremamente condenada pelos profissionais da saúde pelas possíveis consequências negativas que este ato pode causar, podendo gerar sequelas graves e irreversíveis. Tal situação não é diferente na Odontologia, quando os pacientes realizam procedimentos domésticos para camuflar um problema odontológico, principalmente quando há um comprometimento importante da estética do sorriso. O objetivo do presente artigo é relatar uma abordagem de tratamento multidisciplinar, a qual o ortodontista teve papel fundamental na correção dos efeitos adversos na oclusão causados pela autointervenção de uma paciente, que utilizou de artifícios domésticos para restabelecer de forma emergencial sua estética do sorriso. (AU)

Abstract Self-medication, a procedure performed by patients to relieve some symptoms of discomfort, is extremely disapproved of by health professionals for the possible negative consequences that this act can cause, which can generate serious and irreversible sequelae. Such a situation is no different in dentistry, when patients perform domestic procedures to camouflage a dental problem, especially when there is an important commitment to the smile's aesthetics. The aim of this article is to report a multidisciplinary treatment approach, one in which the orthodontist played a relevant role in correcting the adverse effects of the occlusion caused by the self-intervention of a patient, who used domestic devices to urgently restore her smile aesthetics (AU)

Assuntos

RESUMO

Resumo As ligas de níquel-titânio (NiTi) possuem elasticidade elevada sem sofrer deformações plásticas permanentes, sendo amplamente indicadas nas primeiras fases do tratamento ortodôntico. O Objetivo deste estudo é avaliar a resistência de fios ortodônticos de NiTi termoativados em relação à deformação plástica. Foram avaliados fios de 6 marcas comerciais (GAC®, Morelli®, American Orthodontics®, Infinity®e 3M®). Primeiramente a partir de modelos prototipados foi simulada a relação entre deformação plástica e deflexão pela distância interbráquetes em 4 níveis de força a 37°C por 30 dias. Um segundo experimento foi realizado através da análise de fotografias padronizadas com diagramas observando o antes e depois de aplicada uma deformação ao fio a diferentes temperaturas. Os resultados do primeiro teste mostraram que todas as marcas comerciais testadas retornaram a sua forma original após sofrer deflexão por 30 dias. O segundo experimento mostrou que os fios da marca GAC® e American Orthodontics® não apresentaram diferenças estatisticamente significativas comparando as medidas do fio antes da deformação, deformado e após aquecimento (fio aquecido). Já os fios das marcas 3M®, Orthometric® e Infinity®, Morelli apresentaram diferenças significantes entre os fios novos e os fios deformados, e entre os fios deformados e os fios aquecidos, porém, não houve diferenças significantes entre os fios novos e aquecidos. Concluiu-se que nenhum fio, em nenhuma magnitude de deflexão aplicada, sofreu deformação plástica (permanente). Assim, todos os fios das marcas comerciais testadas foram considerados satisfatórios para a prática clínica da Ortodontia no que diz respeito à resistência a deformação plástica. (AU)

Abstract Nickel-titanium (NiTi) alloys have high elasticity without suffering permanent plastic deformations, widely indicated in the early stages of orthodontic treatment. This study aims to evaluate the heat-activated NiTi orthodontic wires' resistance to plastic deformation. The wire from 6 commercial brands (GAC®, Morelli®, American Orthodontics®, Infinity®, and 3M®) was evaluated first from prototype models, simulating the relationship between plastic deformation and deflection by the inter bracket distance at four levels of force at 37° C for 30 days. A second experiment was carried out by analyzing standardized photographs with diagrams observing the before and after deformation was applied to the wire at different temperatures. The first test showed that all tested trademarks returned to their original shape after deflecting for 30 days. The second experiment showed that GAC® and American Orthodontics® wires did not present statistically significant differences comparing the wire measurements before deformed deformation and after heating (heated wire). On the other hand, 3M®, Orthometric® and Infinity®, Morelli wires showed significant differences between new and deformed wires and between twisted and heated wires; however, there were no significant differences between new and heated wires. It was concluded that no wire, at any magnitude of applied deflection, suffered plastic (permanent) deformation. Thus, all wires of the commercial brands tested were considered satisfactory for the clinical practice of Orthodontics in terms of resistance to plastic deformation.(AU)

Assuntos

RESUMO

Resumo O presente estudo teve como objetivo avaliar o conhecimento dos ortodontistas inscritos na Associação Brasileira de Ortodontia e Ortopedia Facial ­ Seção Minas Gerais (ABOR/MG) sobre a movimentação ortodôntica de dentes traumatizados. A pesquisa foi realizada por meio de um questionário eletrônico desenvolvido na plataforma Google Forms® e enviado via e-mail. O questionário foi baseado no trabalho de Tondelli et al.1 (2010), composto por 21 questões objetivas, o qual foi dividido em 3 partes: a parte 1 abordou os dados demográficos dos participantes; a parte 2 coletou informações a respeito do conhecimento sobre traumatismo dentoalveolar e a parte 3 buscou avaliar o conhecimento dos profissionais em relação à movimentação ortodôntica de dentes traumatizados. A amostra consistiu de 93 (32%) de 289 ortodontistas registrados na ABOR/MG que responderam voluntariamente ao questionário, sendo 52,7% do sexo masculino e 47,3% do sexo feminino. Quanto à formação, a maioria (58,1%) apresentava o curso de Especialização concluído, 34,4% tinham concluído Mestrado ou Doutorado. A maior parte da amostra tinha mais de 10 anos de exercício da Ortodontia (50,5%). Do total, 53,8% afirmaram que praticam exclusivamente Ortodontia em seu consultório e 91,4% responderam que já atenderam pacientes com traumatismo dentário. No entanto, 21,5% afirmaram que apenas às vezes perguntam sobre história prévia de dentes traumatizados. O tipo de trauma com respostas mais assertivas foi avulsão (95,7%), enquanto subluxação, foi a que teve menos respostas adequadas (75,3%). A maioria dos ortodontistas possui um nível de conhecimento considerado satisfatório em relação às classificações de traumas dentários. Porém, a conduta em relação à movimentação ortodôntica destes dentes ainda é inadequada e uma maior capacitação desses profissionais torna-se necessária para levar ao correto tratamento e ao melhor prognóstico do paciente com traumatismo dentário (AU)

Abstract The aim of the present study was to evaluate the knowledge of orthodontists of the Brazilian Orthodontics and Facial Orthopedics Association ­ Minas Gerais section (ABOR/MG) in relation to orthodontic movement of traumatized teeth. The research was conducted with an electronic questionnaire answered through the Google Forms® platform and sent to the participants by e-mail. A number of 21 objective questions, based on Tondelli's et al.1 (2010) work, were divided into 3 parts: the profile data of the professionals composed part 1; part 2 collected information on the knowledge of dentoalveolar trauma; and part 3 evaluated the professional's knowledge in relation to the orthodontic movement of traumatized teeth. The sample of the study was a total of 289 orthodontists registered in the ABOR/MG association: 93 of these answered the questionnaire (32%), in which 51% were men and 49% were women. In terms of professional qualification and education, most participants (58,1%) had Specialization and 53,8% had more than 10 years of experience in the area of Orthodontics. In total, 53,8% declared having practiced exclusively Orthodontics in their clinics and 91,4% have already treated patients with dental trauma. However, 21,5% affirmed that only sometimes they ask the patients about the previous trauma history. The type of trauma with the most correct answers was avulsion (95,7%) and subluxation was the lesion with the lowest number of adequate response (75,3%). Most orthodontics has a level of knowledge in regard to dental trauma considered to be satisfactory. On the other hand, their conduct in orthodontic movement is inadequate and more capacitation and training of these professionals are necessary for the correct treatment and prognosis of the traumatized patient. (AU)

Assuntos

RESUMO

This systematic review was focused on evaluating tooth autotransplantation, considering its impacts on the teeth, bone, soft tissues, and aesthetics in orthodontic patients. A bibliographic search was conducted without limitations on year of publication or language in the databases of PubMed, Web of Science, Scopus, Medline Complete, Cochrane, Clinical Trials, and Trials Central. For triage of articles, indications, surgical planning, orthodontic movement, risk factors for treatment, and long-term follow-ups were considered. For outcomes, the results with reference to teeth, alveolar bone, periodontal tissues, and esthetic satisfaction were considered. Risk of bias was evaluated using the methodological index for nonrandomized studies-MINORS. The results showed 10 controlled clinical trials, and no randomized clinical trials were found. The selected studies included 715 patients and 934 autotransplanted teeth among which there were premolars, molars, and anterior teeth evaluated in the long term, indicating that orthodontics associated with autotransplantation indicated a result that was generally clinically acceptable. The quality of the set of evidence was considered medium due to the presence of different methodological problems, risk of bias, and significant heterogeneity in the evaluated studies. There was a sufficient body of evidence that justified autotransplantation in patients who needed orthodontic movement. In teeth, there was an increase in root resorption influenced by orthodontics, but without impacting on the general clinical result in the long term. Bone and periodontal tissue do not appear to be affected by orthodontics. The patient's aesthetic satisfaction was not considered in the studies.

RESUMO

INTRODUCTION: Conventional direct and indirect bonding techniques fail to obtain the ideal bracket position. OBJECTIVE: To compare the accuracy of virtual and conventional direct bonding of orthodontic accessories. METHODS: A single virtual configuration (dental mannequin with Class I malocclusion) served as basis for generating the reference model (treated virtually) and the intervention models (10 digital models and 10 solid models, obtained by means of prototyping). A total of 560 teeth were then equally distributed between a group of orthodontists (Group I, direct bonding; and Group II, virtual bonding), working in two different time intervals. The individual positions of the accessories were measured after three-dimensional superimposition with customized software. The Student's-t test for paired samples, and Chi-square tests were used for statistical analysis, both at the level of significance of 5%. RESULTS: In comparison of the errors in raw values, there were significant differences only in the vertical (p< 0.001) and horizontal dimensions (p< 0.001). Considering the groups of ranges by clinical limits of the deviations, these differences were significant in the three dimensions, vertical (p< 0.001), horizontal (p= 0.044) and angular (p= 0.044). CONCLUSION: Virtual bonding made it possible to obtain more precise/accurate positioning of the orthodontic accessories. The potential accuracy of this method brings new perspectives to refining the indirect bonding protocols.

Assuntos