RESUMO
Biocompatible scaffolds are porous matrices that are bone substitutes with great potential in tissue regeneration. For this, these scaffolds need to have bioactivity and biodegradability. From this perspective, 3D printing presents itself as one of the techniques with the greatest potential for scaffold manufacturing with porosity and established structure, based on 3D digital modeling. Thus, the objective of the present work was to produce 3D scaffolds from the poly (lactic acid) (PLA) and the nanostructured hydroxyapatite doped with carbonate ions (CHA). For this purpose, filaments were produced via fusion for the fused-filament 3D printing and used to produce scaffolds with 50% porosity in the cubic shape and 0/90°configuration. The dispersive energy spectroscopy and Fourier transform infrared spectroscopy (FTIR) analysis demonstrated the presence of CHA in the polymeric matrix, confirming the presence and incorporation into the composite. The thermogravimetric analysis made it possible to determine that the filler concentration incorporated in the matrix was very similar to the proposed percentage, indicating that there were no major losses in the process of obtaining the filaments. It can be assumed that the influence of CHA as a filler presents better mechanical properties up to a certain amount. The biological results point to a great potential for the application of PLA/CHA scaffolds in bone tissue engineering with effective cell adhesion, proliferation, biocompatibility, and no cytotoxicity effects.
RESUMO
Objetivo: o presente estudo teve como objetivo caracterizar as dimensões dos instrumentos Reciproc R25 e X1 Blue File, e dos cones de guta-percha da Mk Life R25, Reciproc R25 e DiaDent R25, para verificar qual cone de guta-percha se adapta melhor no preparo dos instrumentos. Métodos: dez instrumentos Reciproc R25 25/0,08v e X1Blue File 25/0,06; e dez cones de guta-percha Dia- Dent R25, Mk Life R25 e Reciproc R25 foram utilizados. As imagens foram obtidas através de uma lupa estereoscópica com uma câmera digital acoplada. As medidas foram obtidas através do programa TS View. Os diâmetros dos instrumentos e dos cones de guta-percha foram determinados em D0 até D9, com intervalos de medidas de 1,0 mm; e a conicidade foi calculada adotando-se os diâmetros D8 e D1. Os resultados obtidos foram submetidos à análise estatística utilizando o programa Primer of biostatistics versão 6.0. Resultados: apesar da maior conicidade dos instrumentos X1Blue file (0,07mm/mm), não houve diferença estatisticamente significativa entre os instrumentos nos três primeiros milímetros (p > 0,05), o mesmo ocorreu para a conicidade dos cones (p > 0,05). Os cones de guta-percha apresentaram diferença estatisticamente significativa em todos os diâmetros aferidos (p < 0,05). Conclusão: os instrumentos e os cones de guta-percha atenderam à recomendação das respectivas normas ANSI/ADA. O cone de guta-percha que apresentou maior compatibilidade dimensional com os diâmetros dos instrumentos foi o MK life, e VDW foi o que apresentou maior desajuste (AU).
Objective: The aim of this study was to characterize the dimensions of the Reciproc R25 and X1 Blue File instruments and the gutta-percha points of Mk Life R25, Reciproc R25 and DiaDent R25 to verify which gutta-percha point better fits to the instruments preparation. Material and methods: Ten Reciproc R25 25/0.08v and X1Blue File 25/0.06 instruments; and ten DiaDent R25, Mk Life R25 and Reciproc R25 gutta-percha points were used. The images were obtained through a stereomicroscopic with a digital camera coupled. The measurements were obtained through the TS View program. The diameters of instruments and gutta-percha points were determined in D0 through D9 at 1.0 mm intervals, and the taper was calculated by adopting diameters D8 and D1. The results were submitted to statistical analysis using the program Primer of biostatistics version 6.0. Results: Despite the greater taper of the X1Blue file instruments (0.07mm /mm), there was no statistically significant difference between the instruments in the first 3 millimeters (p> 0.05), the same was observed for the tapers of the guta-percha points (p> 0.05). The gutta-percha points presented a statistically significant difference in all measured diameters (p <0.05). Conclusion: Gutta-percha points and instruments have met the recommendations of their respective ANSI/ADA standards. The gutta-percha point that presented greater dimensional compatibility with the diameters of the instruments was the MK life, and VDW presented the greatest mismatch (AU).
Assuntos
Materiais Restauradores do Canal Radicular , Obturação do Canal Radicular , Instrumentos Odontológicos , Guta-PerchaRESUMO
OBJECTIVES: The hormonal treatment for endometriosis frequently fails to completely eradicate endometriotic implants. A new therapeutic treatment is needed. This study investigates the in-vitro effect of Copaifera langsdorffii oil-resin on human eutopic and ectopic endometrium stromal cell cultures (EuESCs and EctESCs). METHODS: A nanocomposite system containing the copaiba oil-resin (NanoCOR) was developed and acute toxicity test was performed. Endometrial stromal cells (ESCs) from non-endometriotics controls (CESCs), EuESCs and EctESCs were isolated and treated with different concentrations of NanoCOR, at different time intervals to evaluate its effect on cell morphology, proliferation, viability, necrosis and apoptosis induction. KEY FINDINGS: When treated with 50 µg/ml of NanoCOR, the morphology of EctESCs changed, as the actin microfilaments were disorganized, disassembled or disrupted. Moreover, at 24 h of treatment with NanoCOR, the EctESCs viability was inhibited, and a significant number of these cells underwent apoptosis. In EuESCs, these effects were observed only at 48 h. Finally, the treatment of EctESCs with NanoCOR increased the lactate dehydrogenase release into the extracellular medium more than in EuESCs. CONCLUSIONS: Our data indicate that NanoCOR has a greater impact on the behaviour of human endometriotic stromal cells than on the eutopic endometrium stromal cells, supporting the idea that NanoCOR should be further investigated as a novel and valuable alternative to treat endometriosis.