RESUMO

Veterinary dentistry is one of the specialties with the greatest potential to contribute to animal welfare; however, it requires a deep anatomical knowledge of the region to be treated. Therefore, the aim was to describe the macroscopic, morphometric, and tomographic anatomy of the mandible of the collared peccary in order to provide support for a better understanding of local morpho-physiology and to improve clinical procedures and interpretation of imaging exams in live adult specimens. Four mandibles from wild adult Pecari tajacu were used. The mandibles were submitted to CT scanning, and comparative analyses were performed using multiplanar views. Afterward, mandibular morphometry was conducted following the literature. Each hemimandible is composed of body, angle, and ramus. The main bony landmarks are the mandibular foramen, three main lateral mental foramina, two medial mental foramina, condylar and coronoid processes, and mandibular and angular notches. The teeth are bunodont, and the dental formula is I3/C1/PM3/M3. All bony structures were observed both in the prepared mandible and in the tomographic images and their 3D reconstruction. No obvious differences were observed in the morphometric data between males and females, or between right and left hemimandibles. It can be concluded that the mandible of the collared peccary may be anatomically structured to favor its omnivorous feeding habit. CT scan proved to be an excellent tool for evaluating the teeth and mandible, and it also provides reliable 3D bone reconstructions that can be helpful in the structural identification and the planning of oral care in live adult animals.

Assuntos

RESUMO

The disposition and topography of the facial nerve are arguably of critical importance for professionals who work directly with oral health. This paper reports a case of anatomical variation in which the dorsal buccal branch of the facial nerve perforated the parotid lymph node parenchyma in two hemiheads of Ovis aries. The infratemporal and facial regions of 30 hemiheads were dissected in a practical class following the methodology indicated in the literature. As expected, after emerging from the stylomastoid foramen, the facial nerve subdivided into the dorsal and ventral buccal branches in all animals. However, in 6.66% of the hemiheads, the dorsal branch perforated longitudinally the parotid lymph node parenchyma. We concluded that even with a low rate of occurrence, anatomical variations of the dorsal buccal branch of the facial nerve may be present in sheep. This knowledge is of essential importance because subsequent traumatic and/or inflammatory changes can cause neural compression and compromise the innervation of the face, leading to semiological and diagnostic confusion.

O nervo facial é, indiscutivelmente, um dos mais importantes para aqueles profissionais que trabalham diretamente com a saúde oral. Sabendo que a disposição e topografia do nervo facial são de importância crítica para a prática médica, objetivou-se relatar um caso de variação anatômica em que o ramo bucal dorsal do nervo facial perfurou o parênquima do linfonodo parotídeo em duas hemicabeças de Ovis aries. As regiões infratemporal e facial de 30 hemicabeças foram dissecadas e conforme esperado, após emergir pelo forame estilomastóideo o nervo facial subdividiu-se nos ramos bucal dorsal e bucal ventral em todos os animais, entretanto, em 6,66% das hemicabeças este primeiro ramo perfurou longitudinalmente o parênquima do linfonodo parotídeo. Concluiu-se que, ainda que com uma taxa de ocorrência baixa, variações anatômicas do ramo bucal dorsal do nervo facial podem estar presentes nos ovinos. Este conhecimento é de essencial importância uma vez que em casos como este as alterações traumáticas e/ou inflamatórias podem causar a compressão neural e comprometimento da inervação da face, possibilitando uma confusão semiológica e diagnóstica.

Assuntos

RESUMO

The disposition and topography of the facial nerve are arguably of critical importance for professionals who work directly with oral health. This paper reports a case of anatomical variation in which the dorsal buccal branch of the facial nerve perforated the parotid lymph node parenchyma in two hemiheads of Ovis aries. The infratemporal and facial regions of 30 hemiheads were dissected in a practical class following the methodology indicated in the literature. As expected, after emerging from the stylomastoid foramen, the facial nerve subdivided into the dorsal and ventral buccal branches in all animals. However, in 6.66% of the hemiheads, the dorsal branch perforated longitudinally the parotid lymph node parenchyma. We concluded that even with a low rate of occurrence, anatomical variations of the dorsal buccal branch of the facial nerve may be present in sheep. This knowledge is of essential importance because subsequent traumatic and/or inflammatory changes can cause neural compression and compromise the innervation of the face, leading to semiological and diagnostic confusion.(AU)

O nervo facial é, indiscutivelmente, um dos mais importantes para aqueles profissionais que trabalham diretamente com a saúde oral. Sabendo que a disposição e topografia do nervo facial são de importância crítica para a prática médica, objetivou-se relatar um caso de variação anatômica em que o ramo bucal dorsal do nervo facial perfurou o parênquima do linfonodo parotídeo em duas hemicabeças de Ovis aries. As regiões infratemporal e facial de 30 hemicabeças foram dissecadas e conforme esperado, após emergir pelo forame estilomastóideo o nervo facial subdividiu-se nos ramos bucal dorsal e bucal ventral em todos os animais, entretanto, em 6,66% das hemicabeças este primeiro ramo perfurou longitudinalmente o parênquima do linfonodo parotídeo. Concluiu-se que, ainda que com uma taxa de ocorrência baixa, variações anatômicas do ramo bucal dorsal do nervo facial podem estar presentes nos ovinos. Este conhecimento é de essencial importância uma vez que em casos como este as alterações traumáticas e/ou inflamatórias podem causar a compressão neural e comprometimento da inervação da face, possibilitando uma confusão semiológica e diagnóstica.(AU)

Assuntos

RESUMO

Considering Suidae Familie as a perfect and viable experimental biomedical model for research applied to human medicine, it has been sought to describe the comparative anatomy of the digastric and the stylohyoid muscles between boars and domestic swine. Heads of Sus scrofa scrofa and Sus scrofa domesticus were dissected. The digastric muscle presented only one muscle belly as anatomical component of a tendinous origin in the jugular process of the occipital bone, and muscle insertion in the midventral edge of the caudal two thirds of the body of the mandible. Thus, its function is fundamentally associated with the lowering and the retracting of the mandible which, by the way, can deliver greater muscle power at lesser energy expense. For the stylohyoid muscle, the tendinous origin was in the laterocaudal edge of the dorsal third of the stylohyoid bone. The muscle insertion - primarily, was in the lateral and caudal edges from the mid third portion up to the ventral extremity of the thyrohyoid bone, and secondarily as a laterolateral aponeurotic blade which would unite, in a bilateral manner, an insertion that was common to the sternohyoid, the geniohyoid, and the mylohyoid muscles in a median ventral region. This morphology were similar to the two specimens studied expanding the information available, which were completely unknown for the suidae until the moment.

RESUMO

The study of the muscular anatomy of wild boar (Sus scrofa) is important, because it allows the understanding of the locomotor and evolutionary aspects, besides the improvement of surgical techniques used by veterinarians in swine. Thus, the objective of this study was to describe the morphology and disposition of the shoulder and arm muscles of S. scrofa. Twelve young specimens of hybrid S. scrofa, six males and six females were fixed and dissected following usual anatomy techniques. The bones of two specimens were prepared to analyze the fixation points of the muscles. The shoulder muscles presented fixation at the scapula and humerus, in distinct bone accidents, and were divided on lateral and medial faces. On the lateral face, the deltoid (divided in acromial and scapular parts), supraspinatus, infraspinatus (divided in cranial and caudal parts) and teres minor (deep to the caudal part of the infraspinatus) muscles were found. In the medial face, the subscapular, coracobrachialis and teres major muscles were observed. The arm muscles were arranged essentially around the humerus and were seen largely on its medial face, namely biceps brachii (originated by a single tendon), brachialis, tensor fasciae antebrachii (fused with the long head of the triceps brachii), triceps brachii (divided in lateral, long and medial heads) and anconeus (located mostly on the lateral side) muscles. Thus, it can be concluded that the S. scrofa presented seven muscles in the shoulder region and six muscles in the arm region, all with morphological similarities to domestic and some wild animals. Some differences were found, for the most part, in the shape, division and fixation points of certain muscles.

Assuntos

RESUMO

Whilst considering the need anesthetic techniques supported by species-specific morphology, it has been sought to describe the morphometry of the Hoary Fox's infraorbital foramen with aims at correlating its topography with points of anatomic reference in the skull, thereby providing subsidy for a more effective local anesthetic block in that species. Four skulls of Lycalopex vetulus had been used, from which all of the measurements in each antimere were performed. The infraorbital foramen was located at the maxilla bone, dorsally-wise from the third upper pre-molar tooth, and, from the ventral end of its caudal margin, it would stand apart from the alveolar margin of that bone by 4.19 mm, in average; from the orbital margin at the level of the lacrimal foramen by 14.10 mm; from the dorsal end of the frontal process of the zygomatic bone by 37.10 mm; from the rostral end of the alveolar margin of the first upper incisor tooth by 38.54 mm; and, from the caudal end of the nuchal crest by 100.53mm - at the level of the median sagittal plane; as it also presented a sagittal axis of 5.21 mm in average. It is suggested that, for the Hoary Fox, the needle be introduced by 4.19 mm in contact with the maxilla bone, in a perpendicular fashion, and in a ventral-dorsal orientation from the alveolar margin of the same - whilst using, as an anatomic reference, the diastema that exists between the third and the fourth upper pre-molar teeth.(AU)

Considerando-se a necessidade de técnicas anestésicas respaldadas pela morfologia espécie-específica, objetivou-se descrever a morfometria do forame infraorbital de Raposa-do-campo a fim de correlacionar sua topografia com pontos de referência anatômica no crânio, oferecendo subsídio para um bloqueio anestésico local mais efetivo nesta espécie. Foram utilizados quatro crânios de Lycalopex vetulus, a partir dos quais foram realizadas todas as mensurações em cada antímero. O forame infraorbital localizou-se no osso maxila, dorsalmente ao terceiro dente pré-molar superior e, a partir do extremo caudal de sua margem ventral, distanciou-se, em média, 4,19 mm da margem alveolar desse osso; 14,10 mm da margem orbital ao nível do forame lacrimal; 37,10 mm do extremo dorsal do processo frontal do osso zigomático; 38,54 mm do extremo rostral da margem alveolar do dente incisivo medial superior; e 100,53 mm do extremo caudal da crista nucal ao nível do plano sagital mediano; além de apresentar um eixo sagital com uma média de 5,21 mm. Para a Raposa-do-campo sugere-se que a agulha seja introduzida por 4,19 mm em contato com o osso maxila, de forma perpendicular e em sentido ventrodorsal a partir de sua margem alveolar, utilizando como referência o diastema existente entre o terceiro e quarto dentes pré-molares superiores.(AU)

Assuntos

RESUMO

Whilst considering the need anesthetic techniques supported by species-specific morphology, it has been sought to describe the morphometry of the Hoary Fox's infraorbital foramen with aims at correlating its topography with points of anatomic reference in the skull, thereby providing subsidy for a more effective local anesthetic block in that species. Four skulls of Lycalopex vetulus had been used, from which all of the measurements in each antimere were performed. The infraorbital foramen was located at the maxilla bone, dorsally-wise from the third upper pre-molar tooth, and, from the ventral end of its caudal margin, it would stand apart from the alveolar margin of that bone by 4.19 mm, in average; from the orbital margin at the level of the lacrimal foramen by 14.10 mm; from the dorsal end of the frontal process of the zygomatic bone by 37.10 mm; from the rostral end of the alveolar margin of the first upper incisor tooth by 38.54 mm; and, from the caudal end of the nuchal crest by 100.53mm - at the level of the median sagittal plane; as it also presented a sagittal axis of 5.21 mm in average. It is suggested that, for the Hoary Fox, the needle be introduced by 4.19 mm in contact with the maxilla bone, in a perpendicular fashion, and in a ventral-dorsal orientation from the alveolar margin of the same - whilst using, as an anatomic reference, the diastema that exists between the third and the fourth upper pre-molar teeth.

Considerando-se a necessidade de técnicas anestésicas respaldadas pela morfologia espécie-específica, objetivou-se descrever a morfometria do forame infraorbital de Raposa-do-campo a fim de correlacionar sua topografia com pontos de referência anatômica no crânio, oferecendo subsídio para um bloqueio anestésico local mais efetivo nesta espécie. Foram utilizados quatro crânios de Lycalopex vetulus, a partir dos quais foram realizadas todas as mensurações em cada antímero. O forame infraorbital localizou-se no osso maxila, dorsalmente ao terceiro dente pré-molar superior e, a partir do extremo caudal de sua margem ventral, distanciou-se, em média, 4,19 mm da margem alveolar desse osso; 14,10 mm da margem orbital ao nível do forame lacrimal; 37,10 mm do extremo dorsal do processo frontal do osso zigomático; 38,54 mm do extremo rostral da margem alveolar do dente incisivo medial superior; e 100,53 mm do extremo caudal da crista nucal ao nível do plano sagital mediano; além de apresentar um eixo sagital com uma média de 5,21 mm. Para a Raposa-do-campo sugere-se que a agulha seja introduzida por 4,19 mm em contato com o osso maxila, de forma perpendicular e em sentido ventrodorsal a partir de sua margem alveolar, utilizando como referência o diastema existente entre o terceiro e quarto dentes pré-molares superiores.

Assuntos

RESUMO

Boars kept on commercial farms use their canine teeth as a mechanism of defense and attack in order to express their natural instincts, which could result in fractures of the teeth and jaws. Thus, utilizing local desensitization of the inferior alveolar nerve is crucial for executing therapeutic procedures in the oral cavities of those animals. Then, the goal is to carry out the morphometry of the mandibular foramen of that species, correlating it with the mandibular structures, while doing so in the safest manner for the animals. For that purpose, six hemimandibles of young-aged Sus scrofa scrofa were used, from which the proposed measurements were taken. On average, the lateral margin of the condylar process stood 142.43 mm away from the root of the lower medial incisive tooth. The longitudinal axis of the body of the mandible measured 22.3 mm at the level of the diastema that exists between the fourth lower premolar tooth and the first lower molar tooth. The mandibular foramen, from the caudal limit of the ventral margin, would be positioned at 26.6 mm from the ventral margin of the angle of the mandible in that level, 34.92 mm away from the medial margin of the condylar process, and 38.63 mm away from the dorsal limit from the caudal margin of the coronoid process. The lack of statistically significant differences, and observing that the osseous accident under scrutiny had been positioned in the ramus of the mandible, indicated that the proposed procedure should be performed from the introduction of the needle in an oblique and rostrodorsal direction for 2.0 cm, and angulated at 60º with the anatomic reference created by the medial demarcation obtained via the support of the thumb on the lateral margin of the ramus of the mandible, ventrally to the zygomatic arch, all while preserving neighboring structures and establishing an unheard-of anesthetic methodology for boars.(AU)

Javalis mantidos em criatórios comerciais utilizam os dentes caninos como mecanismo de defesa e ataque a fim de expressar seus instintos naturais, o que pode resultar em fraturas dentárias e da mandíbula propriamente dita. Desta forma, propiciar a dessensibilização local do nervo alveolar inferior é essencial para a execução de procedimentos terapêuticos na cavidade oral destes animais. Logo, objetivou-se realizar a morfometria do forame mandibular desta espécie a fim de correlacioná-lo com as estruturas mandibulares, inferindo, também, sobre a forma mais segura de realização da referida técnica nos espécimes. Para tanto, foram utilizadas seis hemimandíbulas de Sus scrofa scrofa jovens, a partir das quais foram realizadas as mensurações propostas. Em média, a margem lateral do processo condilar distanciou-se 142,43 mm da raiz do dente incisivo medial inferior; o eixo longitudinal do corpo da mandíbula mediu 22,3 mm ao nível do diastema existente entre o quarto dente pré-molar e o primeiro dente molar inferiores; e o forame mandibular, a partir do extremo caudal de sua margem ventral, posicionou-se a 26,6 mm da margem ventral do ângulo da mandíbula neste nível, 34,92 mm da margem medial do processo condilar, e 38,63 mm do extremo dorsal da margem caudal do processo coronóide. Na falta de diferenças estatisticamente significantes, e observando que o acidente ósseo estudado posicionou-se no ramo da mandíbula, indica que o procedimento proposto deva ser realizado a partir da introdução da agulha em sentido oblíquo rostroventral por 2,0 cm e angulada a 60º com o referencial anatômico criado pela delimitação medial obtida pelo apoio do dedo polegar na margem lateral do ramo da mandíbula, ventralmente ao arco zigomático, preservando as estruturas próximas e definindo-se uma metodologia anestésica inédita para os Javalis.(AU)

Assuntos

RESUMO

Boars kept on commercial farms use their canine teeth as a mechanism of defense and attack in order to express their natural instincts, which could result in fractures of the teeth and jaws. Thus, utilizing local desensitization of the inferior alveolar nerve is crucial for executing therapeutic procedures in the oral cavities of those animals. Then, the goal is to carry out the morphometry of the mandibular foramen of that species, correlating it with the mandibular structures, while doing so in the safest manner for the animals. For that purpose, six hemimandibles of young-aged Sus scrofa scrofa were used, from which the proposed measurements were taken. On average, the lateral margin of the condylar process stood 142.43 mm away from the root of the lower medial incisive tooth. The longitudinal axis of the body of the mandible measured 22.3 mm at the level of the diastema that exists between the fourth lower premolar tooth and the first lower molar tooth. The mandibular foramen, from the caudal limit of the ventral margin, would be positioned at26.6 mm from the ventral margin of the angle of the mandible in that level, 34.92 mm away from the medial margin of the condylar process, and 38.63 mm away from the dorsal limit from the caudal margin of the coronoid process. The lack of statistic

Javalis mantidos em criatórios comerciais utilizam os dentes caninos como mecanismo de defesa e ataque a fim de expressar seus instintos naturais, o que pode resultar em fraturas dentárias e da mandíbula propriamente dita. Desta forma, propiciar a dessensibilização local do nervo alveolar inferior é essencial para a execução de procedimentos terapêuticos na cavidade oral destes animais. Logo, objetivou-se realizar a morfometria do forame mandibular desta espécie a fim de correlacioná-lo com as estruturas mandibulares, inferindo, também, sobre a forma mais segura de realização da referida técnica nos espécimes. Para tanto, foram utilizadas seis hemimandíbulas de Sus scrofa scrofa jovens, a partir das quais foram realizadas as mensurações propostas. Em média, a margem lateral do processo condilar distanciou-se 142,43 mm da raiz do dente incisivo medial inferior; o eixo longitudinal do corpo da mandíbula mediu 22,3 mm ao nível do diastema existente entre o quarto dente pré-molar e o primeiro dente molar inferiores; e o forame mandibular, a partir do extremo caudal de sua margem ventral, posicionou-se a 26,6 mm da margem ventral do ângulo da mandíbula neste nível, 34,92 mm da margem medial do processo condilar, e 38,63 mm do extremo dorsal da margem caudal do processo coronóide. Na fa