RESUMO
The conducting polymer, poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT:PSS), is certainly one of the most important substitute materials for indium tin oxide in organic devices. Its metallic conductivity and transmittance bring favorable perspectives for organic photovoltaic applications. Although graphene oxide (GO) is not a good conductor, it can form high-quality thin films and can be transparent, and additionally, GO is an inexpensive material and can be easily synthesized. This study investigated how the conductivity of a composite film of graphene oxide (GO) and different amounts of PEDOT:PSS can be modified. The effects of GO:PEDOT:PSS composites with several PEDOT:PSS proportions were analyzed in regards to the composite molecular structure and ordering, charge transfer dynamics (in the femtosecond range), electrical properties and morphology. For the best conductivity ratio GO found with 5% PEDOT:PSS, a solvent treatment was also performed, comparing the resistivity of the film when treated with dimethyl sulfoxide (DMSO) and with ethylene glycol.
RESUMO
Most of the dye-sensitized solar cells (DSSCs) developed so far use organic electrolytes and water-sensible sensitizers. The search for aqueous DSSCs, a promising technology for solar-energy conversion, implies finding materials that are stable in aqueous solution. In this study, Prussian blue (PB) was utilized as an innovative sensitizer in a photoanode for DSSCs and a novel synthetic approach to a carbon nanotubes/TiO2 /PB nanocomposite thin film was developed. The photoresponse was evaluated in a total aqueous electrolyte, and photocurrents of 600â µA cm-2 were achieved.
RESUMO
We use X-ray photoelectron spectroscopy (XPS), Near-edge X-ray absorption fine structure (NEXAFS), resonant Auger spectroscopy (RAS), Attenuation Total Reflection Infrared (ATR-IR) and Atomic Force Microscopy (AFM) to study the blend between the copolymer poly[2,7-(9,9-bis(2-ethylhexyl)-dibenzosilole)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadiazole] (PSiF-DBT) and the fullerene derivative PC71BM submitted to different annealing temperatures. Those measurements indicate that there is an incidental anchoring of a fullerene derivative to the Si-bridging atoms of a copolymer induced by thermal annealing of the film. Insights about the physical properties of one possible PSiF-DBT/PC71BM anchored structure are obtained using Density Functional Theory calculations. Since the performance of organic photovoltaic based on polymer-fullerene blends depends on the chemical structure of the blend components, the anchoring effect might affect the photovoltaic properties of those devices.
RESUMO
A versatile and room temperature synthesis of thin films of polymer/graphene is reported. Drastically differing from other methods, not only the polymer but also the graphene are completely built from their simplest monomers (thiophene and benzene) in a one-pot polymerization reaction at a liquid-liquid interface. The materials were characterized and electronic properties are presented.
RESUMO
Iron-oxide-filled carbon nanotubes exhibit an intriguing charge bipolarization behavior which allows the material to be applied in resistive memory devices. Raman analysis conducted with an electric field applied in situ shows the Kohn anomalies and a strong modification of the electronic properties related to the applied voltage intensity. In addition, the I(D)/I(G) ratio indicated the reversibility of this process. The electrical characterization indicated an electronic transport governed by two main kinds of charge hopping, one between the filling and the nanotube and the other between the nanotube shells.
RESUMO
This work presents a study on iron-oxide filled carbon nanotubes (CNTs) and their interaction with the surrounding atmosphere. Theoretical and experimental methods were employed to determine the interaction mechanism between the CNTs and some gases, such as O2 and N2. The electrical behavior of these CNTs under different atmospheric conditions was studied through resistance measurements, and for comparison, similar studies were conducted on non-filled carbon nanotubes. The iron-oxide filled CNTs were found to be more sensitive to the presence of O2 than the non-filled carbon nanotubes. This behavior was confirmed by the first-principles simulations based on density functional theory with local spin density approximations for CNTs filled with hematite and magnetite iron-oxides. The theoretical study on the interactions of iron-oxide filled CNTs with gas molecules demonstrated a physisorption regime between the nanotube and the surrounding atmosphere, resulting in modifications of the electronic properties of this material.
RESUMO
The conductive blend of the poly (3,4-ethylene dioxythiophene) and polystyrene sulfonated acid (PEDOT-PSS) polymers were doped with Methyl Red (MR) dye in the acid form and were used as the basis for a chemiresistor sensor for detection of ethanol vapor. This Au | Polymers-dye blend | Au device was manufactured by chemical vapor deposition and spin-coating, the first for deposition of the metal electrodes onto a glass substrate, and the second for preparation of the organic thin film forming â¼1.0 mm2 of active area. The results obtained are the following: (i) electrical resistance dependence with atmospheres containing ethanol vapor carried by nitrogen gas and humidity; (ii) sensitivity at 1.15 for limit detection of 26.25 ppm analyte and an operating temperature of 25 °C; and (iii) the sensing process is quickly reversible and shows very a low power consumption of 20 µW. The thin film morphology of â¼200 nm thickness was analyzed by Atomic Force Microscopy (AFM), where it was observed to have a peculiarly granulometric surface favorable to adsorption. This work indicates that PEDOT-PSS doped with MR dye to compose blend film shows good performance like resistive sensor.
RESUMO
Novel silver nanoparticles/polyaniline composites were obtained through a two-phase water/toluene interfacial reaction. We show that by rigorously controlling the reaction time, different structures of the nanocomposites can be obtained, such as a thin sheet of polyaniline around the silver nanoparticles or a polymer mass with nanoparticles homogeneously embedded within it. Samples were characterized by FT-IR, UV-vis-NIR and Raman spectroscopy, X-ray diffraction, cyclic voltammetry, TEM, and HRTEM. Conductivity and current-voltage characteristics of the nanocomposites were measured, and the results indicate that different properties result from the different structures in which the nanocomposites were formed.