RESUMO

We designed a real time, single-laser focus tracking system using low coherence properties of the machining femtosecond laser itself in order to monitor and correct the sample position relative to the focal plane. Using a Michelson Interferometer, the system collects data arising from part of the beam backscattered at the ablation spot. The data is analyzed by a custom software for position correction (employing an XYZ automated translation stage). With the focus tracking enabled we were able to etch channels with a stable cross-section profile on a bovine tooth with relief amplitude tens of times greater than the Rayleigh length of the system, keeping the sample inside the confocal parameter during most of the processing time. Moreover, the system is also capable of monitoring crater depth evolution during the ablation process, allowing for material removal assessment.

RESUMO

Thousands of people die every year from burn injuries. The aim of this study is to evaluate the feasibility of high intensity femtosecond lasers as an auxiliary treatment of skin burns. We used an in vivo animal model and monitored the healing process using 4 different imaging modalities: histology, Optical Coherence Tomography (OCT), Second Harmonic Generation (SHG), and Fourier Transform Infrared (FTIR) spectroscopy. 3 dorsal areas of 20 anesthetized Wistar rats were burned by water vapor exposure and subsequently treated either by classical surgical debridement, by laser ablation, or left without treatment. Skin burn tissues were non-invasively characterized by OCT images and biopsied for further histopathology analysis, SHG imaging and FTIR spectroscopy at 3, 5, 7 and 14 days after burn. The laser protocol was found as efficient as the classical treatment for promoting the healing process. The study concludes to the validation of femtosecond ultra-short pulses laser treatment for skinburns, with the advantage of minimizing operatory trauma.

RESUMO

In this work the diffusion of mercury and other elements from amalgam tooth restorations through the surrounding dental tissue (dentin) was evaluated using femtosecond laser-induced breakdown spectroscopy (fs-LIBS). To achieve this, seven deciduous and eight permanent extracted human molar teeth with occlusal amalgam restorations were half-sectioned and analyzed using pulses from a femtosecond laser. The measurements were performed from the amalgam restoration along the amalgam/dentin interface to the apical direction. It was possible to observe the presence of metallic elements (silver, mercury, copper and tin) emission lines, as well as dental constituent ones, providing fingerprints of each material and comparable data for checking the consistence of the results. It was also shown that the elements penetration depth values in each tooth are usually similar and consistent, for both deciduous and permanent teeth, indicating that all the metals diffuse into the dentin by the same mechanism. We propose that this diffusion mechanism is mainly through liquid dragging inside the dentin tubules. The mercury diffused further in permanent teeth than in deciduous teeth, probably due to the longer diffusion times due to the age of the restorations. It was possible to conclude that the proposed femtosecond-LIBS system can detect the presence of metals in the dental tissue, among the tooth constituent elements, and map the distribution of endogenous and exogenous chemical elements, with a spatial resolution that can be brought under 100 µm.

Assuntos

RESUMO

In this paper we report the effects of the irradiation of low-density lipoprotein (LDL) by ultra-short laser pulses to obtain in vitro alterations mimicking proatherogenic modifications occurring in vivo in LDL. The modifications by metallic ions (copper and iron) and ultra-short laser pulses were studied by fluorescence steady state and time-resolved lifetime measurements. The results demonstrate that the modifications caused by ultra-short laser pulses and by iron affect the tryptophan residues of apolipoprotein B-100 (Apo-B), slightly decreasing fluorescent lifetimes, with almost no modifications in pre-exponential factors, indicating preservation of structural properties around the fluorophore. On the other hand, oxidation by copper strongly affects the Apo-B protein associated with LDL. We describe a fast, inexpensive, and nondestructive fluorescence-based method that is readily accessible to provide the LDL particle characterization.

Assuntos

RESUMO

We report the validation of the Diagonal Scan (D-Scan) technique to determine the incubation parameter for ultrashort laser pulses ablation. A theory to calculate the laser pulses superposition and a procedure for quantifying incubation effects are described, and the results obtained for BK7 samples in the 100 fs regime are compared to the ones given by the traditional method, showing a good agreement.

RESUMO

BACKGROUND/PURPOSE: The continuous advancement in cosmetic science has led to an increasing demand for the development of non-invasive, reliable scientific techniques directed toward claim substantiation, which is of utmost relevance, to obtain data regarding the efficacy and safety of cosmetic products. METHODS: In this work, we used the optical coherence tomography (OCT) technique to produce in vitro transversal section-images of human hair. We also compared the OCT signal before and after chemical treatment with an 18% w/w ammonium thioglycolate solution. RESULTS: The mean diameter of the medulla was 29+/-7 microm and the hair diameter was 122+/-16 microm in our samples of standard Afro-ethnic hair. A three-dimensional (3D) image was constructed starting from 601 cross-sectional images (slices). Each slice was taken in steps of 6.0 microm at eight frames per second, and the entire 3D image was constructed in 60 s. CONCLUSION: It was possible to identify, using the A-scan protocol, the principal structures: the cuticle, cortex and medulla. After chemical treatment, it was not possible to identify the main structures of hair fiber due to index matching promoted by deleterious action of the chemical agent.

Assuntos

RESUMO

The aim of this work was to evaluate the performance of femtosecond laser-induced breakdown spectroscopy (fs-LIBS) for the determination of elements in animal tissues. Sample pellets were prepared from certified reference materials, such as liver, kidney, muscle, hepatopancreas, and oyster, after cryogenic grinding assisted homogenization. Individual samples were placed in a two-axis computer-controlled translation stage that moved in the plane orthogonal to a beam originating from a Ti:Sapphire chirped-pulse amplification (CPA) laser system operating at 800 nm and producing a train of 840 microJ and 40 fs pulses at 90 Hz. The plasma emission was coupled into the optical fiber of a high-resolution intensified charge-coupled device (ICCD)-echelle spectrometer. Time-resolved characteristics of the laser-produced plasmas showed that the best results were obtained with delay times between 80 and 120 ns. Data obtained indicate both that it is a matrix-independent sampling process and that fs-LIBS can be used for the determination of Ca, Cu, Fe, K, Mg, Na, and P, but efforts must be made to obtain more appropriate detection limits for Al, Sr, and Zn.

RESUMO

We report the measurement of the 20 ps ablation threshold of pure and Cr(3+) doped LiSAF samples using a simple method that employs a single scan of the sample across a focused laser beam waist. During the scan, a profile is etched in the sample surface, and the measurement of the maximum transversal size of the profile and the pulse peak power determine the ablation threshold, without any further knowledge of the beam geometry. Also, it was possible to measure the depth of the ablation profile, to calculate its effective volume, and to identify that the maximum material removal rate per pulse does not occur at the beam waist, which is not intuitively expected.

RESUMO

We report here the observation, for the first time, of the enhancement of Europium-Tetracycline complex emission in cholesterol solutions. This enhancement was initially observed with the addition of the enzyme cholesterol oxidase, which produces H(2)O(2), the agent driver of the Europium tetracycline complex, to the solution. However, it was found that the enzyme is not needed to enhance the luminescence. A calibration curve was determined, resulting in a simple method to measure the cholesterol quantity in a solution. This method shows that the complex can be used as a sensor to determine cholesterol in biological systems.

Assuntos

RESUMO

We report the performance of a flashlamp-pumped Cr:LiSrAlF(6) (Cr:LiSAF) laser developed and built by us. The pumping cavity incorporates filters that select the flashlamps' emission spectrum to match the absorption bands of the gain medium, allowing control of the amount of nonradiactive decay heat contribution of the optical cycle, minimizing thermal effects on the laser operation. The laser generated 2 J pulses at 15 Hz, resulting in 30 W of average power, the highest power extracted from a Cr:LiSAF rod laser to our knowledge. We were able to conclude that the laser efficiency is affected by resonator configuration changes due to thermal lens effects, and not to thermal quenching of the Cr:LiSAF luminescence.