RESUMO

The present review describes the state of the art in the conversion of pharmaceutically active ingredients (API) in amphiphilic Ionic Liquids (ILs) as alternative drug delivery systems. In particular, we focus our attention on the compounds generated by ionic exchange and without original counterions which generate different systems in comparison with the simple mixtures. In water, these new amphiphiles show similar or even better properties as surfactants in comparison with their precursors. Cations such as 1-alkyl-3-methyl-imidazolium and anions such as dioctyl sulfosuccinate or sodium dodecyl sulfate appear as the amphiphilic components most studied. In conclusion, this work shows interesting information on several promissory compounds and they appear as an interesting challenge to extend the application of ILs in the medical field.

Assuntos

RESUMO

Ionic liquids (ILs) have received attention for many years due to them being very promising as green solvent substitutes, but they are not fully understood, especially their behavior dissolved in other solvents, for example, water. Thus, the goal of this contribution is to show insight into the different IL-water mixtures interaction. In this way, two protic ILs (PILs), ethylammonium nitrate (EAN) and 1-methylimidazolium acetate (MIA), mixed with water were investigated. To study the PILs-water interaction, the unique spectroscopical behavior in water of the molecular probe 4-aminophthalimide (4-AP) was used. 4-AP emission spectra show hypsochromic shifting by changing the excitation wavelength and, using time-resolved spectroscopy, can be detected by a blue shifting with time. Also, the water mixture of an aprotic IL, 1-methyl-3-butylimidazolium tetrafluoroborate (bmimBF4), and three alcohols, methanol (MeOH), 2-propanol (2-PrOH), and t-butanol (t-BOH), were investigated for comparison. Our results show that the water-ILs interaction is dominated by the size of the IL components, in particular, the cation size. Thus, in MIA-water and bmimBF4-water mixtures, 4-AP is mostly solvated by the IL, even at a low IL molar fraction, as in the t-BOH-water mixture. This finding is especially interesting when ILs-water mixtures are used as a solvent in an organic reaction, where it may call attention to water probably not being the solvent that is interacting with the reactants.

Assuntos

RESUMO

In this review, we deal with the formation and application of biocompatible water-in-oil microemulsions commonly known as reverse micelles (RMs). These RMs are extremely important to facilitate the dissolution of hydrophilic and hydrophobic compounds for biocompatibility in applications in drug delivery, food science, and nanomedicine. The combination of two wisely chosen types of compounds such as biocompatible non-polar solvents and ionic liquids (ILs) with amphiphilic character (surface-active ionic liquids, SAILs) can be used to generate organized systems that perfectly align with the Green Chemistry concepts. Thus, we describe the current state of SAILs (protic and aprotic) to prepare RMs using non-polar but safe solvents such as esters derived from fatty acids, among others. Moreover, the use of the biocompatible solvents as the external phase in RMs and microemulsions/nanoemulsions with the other commonly used biocompatible surfactants is detailed showing the diversity of preparations and important applications. As shown by multiple examples, the properties of the RMs can be modified by changes in the type of surfactant and/or external solvents but a key fact to note is that all these modifications generate novel systems with dissimilar properties. These interesting properties cannot be anticipated or extrapolated, and deep analysis is always required. Finally, the works presented provide valuable information about the use of biocompatible RMs, making them a green and promising alternative toward efficient and sustainable chemistry.

RESUMO

Herein, we report the effect of employing two different alcohols, such as n-pentanol and 2,2,3,3,4,4,5,5-octafluoro pentanol (from now on F-pentanol), into 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs), to determine the interfacial activity and establish the best candidate to act as a cosurfactant in supercritical RMs. Dynamic light scattering (DLS), Fourier transform infrared (FT-IR), and fluorescence emission spectroscopy allowed us to determine and understand the behavior of alkanols in RMs. As a result, we found interesting displacements of alkanol molecules within the RMs, suggesting that the electrostatic interaction between SO3- and Na+ weakens because of new interactions of n-pentanol with SO3- through H-bonds, changing the curvature of the micellar interface. According to FT-IR and DLS studies, F-pentanol forms a RM polar core interacting through intermolecular H-bonds, suggesting no perturbations of the AOT RM interface. Hence, n-pentanol was selected as a cosurfactant to form supercritical RMs, which is confirmed by red edge excitation shift studies, using C343 as a molecular probe. Herein, we were able to create RMs under supercritical conditions without the presence of modified surfactants, fluorinated or multitailed compounds, which, to the best of our knowledge, was not shown before.

RESUMO

The impact of the imidazolium counterion structure on the organized systems formed by the surfactant 1,4-bis-2-ethylhexylsulfosuccinate, AOT, both in aqueous solutions and in nonpolar solvents is investigated. With this in mind, we investigated if the ionic liquid-like (IL-like) surfactant 1-ethyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, emim-AOT, forms direct micelles or vesicles in water. Dynamic light scattering, zeta potential, conductivity, fluorescence spectroscopy, and UV-visible spectroscopy measurements were performed to characterize the organized systems in aqueous solutions. We also studied the self-aggregation of emim-AOT, 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, bmim-AOT, and of 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, hmim-AOT, in nonpolar solvents. The results obtained showed that the IL-like surfactant emim-AOT forms direct micelles in water, as sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) does. However, emim-AOT aggregates are larger, have a lower surface charge, are more stable, and have a more polar and less fluid micellar interface than Na-AOT micelles. It was also observed that emim-AOT and hmim-AOT form reverse micelles in nonpolar solvents. The size of the imidazolium cations dramatically influences the size of the reverse micelles and their ability to solubilize water.

RESUMO

The goal of this work is to understand the influence of the counterion nature on the organized systems formed by 1,4-bis-2-ethylhexylsulfosuccinate surfactants in aqueous solutions and how these aggregates will influence the deoxyribonucleic acid (DNA)-surfactant interactions. With this in mind, two ionic liquid-like surfactants were investigated: 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (hmim-AOT). Measurements of dynamic light scattering, ζ-potential, transmission electron microscopy, and fluorescence and UV-visible spectroscopy were performed to study the characteristics of the vesicles formed by bmim-AOT and hmim-AOT. Regarding the determination of the interaction of the surfactants with DNA, circular dichroism was used. The results obtained showed that bmim-AOT and hmim-AOT ionic liquid-like surfactants spontaneously form unilamellar vesicles in water at very low surfactant concentrations. The characteristics of these aggregates are dependent on the length of the tail of the counterions. The length of the hydrophobic chains of the counterions also influences the DNA-surfactant interactions through hydrophobic effects.

RESUMO

The effect of interfacial water entrapped in two types of catanionic reverse micelles (RMs) on the kinetic parameters of the SN2 reaction between dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate (S+) and n-butylamine (BuNH2) was explored. Two catanionic surfactants, composed of a mixture of oppositely charged ionic surfactants without their original counterions, were used to create the RMs. Thus, benzyl- n-hexadecyldimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (BHD-AOT) and cetyltrimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (CTA-AOT) were formed. Also, the well-known anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (Na-AOT) was employed as a comparison. Our results showed an important catalytic-like effect of all RMs investigated in comparison with a water-benzene mixture, and the rate constant values depend on the type of surfactant used. Faster reaction in BHD-AOT RMs than in CTA-AOT and Na-AOT RMs was observed. This behavior was attributed to the strong interaction (by hydrogen bonding with AOT anion and ion-dipole interaction with BHD+) between the entrapped water and the BHD-AOT interface, which reduces the solvation capacity of water on S+. In CTA-AOT (and Na-AOT) RMs, the water-interface interaction is weaker and the electron pairs of water can solvate S+ ions. In summary, the chemical structure of the counterion on the catanionic surfactant alters the interfacial region, allowing the progress of a reaction inside the RMs to be controlled.

RESUMO

The behavior of the interfacial water entrapped in reverse micelles (RMs) that were formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) was investigated with the use of UV-Vis absorption spectroscopy and nuclear magnetic resonance (NMR) relaxometry. The solvatochromism of two molecular probes, namely, 1-methyl-8-oxyquinolinium betaine (QB) and N,N,N',N'-tetramethylethylenediamine copper(ii)acetylacetonate tetraphenylborate ([Cu(acac)(tmen)][B(C6H5)4]), was investigated. As a comparison, the analog RMs formed by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) were also explored. By varying the water content inside the RMs and consequently the different magnitude of the water-surfactant interactions at the interface, interesting properties were observed by comparing bmim-AOT and Na-AOT RMs. From the solvatochromic behavior of ([Cu(acac)(tmen)][B(C6H5)4]), we found that the interface in bmim-AOT RMs shows a smaller electron donating capacity than that in Na-AOT RMs. QB revealed that the interfacial region is a weaker hydrogen bond donor and less polar than the corresponding Na-AOT RMs. NMR experiments showed that the molecular motion of water in bmim-AOT RMs is less restricted than that of the water molecules confined in Na-AOT RMs. In summary, the results show how the nature of the bmim+ cation affects the interaction between the entrapped water and the RM interface, greatly modifying the interfacial water structure in comparison with the results known for Na-AOT.

RESUMO

The most critical problem regarding the use of reverse micelles (RMs) in several fields is the toxicity of their partial components. In this sense, many efforts have been made to characterize nontoxic RM formulations on the basis of biological amphiphiles and/or different oils. In this contribution, the microstructure of biocompatible mixed RMs formulated by sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) and tri- n-octylphosphine oxide (TOPO) surfactants dispersed in the friendly solvent methyl laurate was studied by using SAXS and 31P NMR and by following the solvatochromic behavior of the molecular probe 4-aminophthalimide (4-AP). The results indicated the presence of RM aggregates upon TOPO incorporation with a droplet size reduction and an increase in the interfacial fluidity in comparison with pure AOT RMs. When confined inside the mixed systems, 4-AP showed a red-edge excitation shift and confirmed the increment of interfacial fluidity upon TOPO addition. Also, the partition between the external nonpolar solvent and the RM interface and an increase in both the local micropolarity and the capability to form a hydrogen bond interaction between 4-AP and a mixed interface were observed. The findings have been explained in terms of the nonionic surfactant structure and its complexing nature expressed at the interfacial level. Notably, we show how two different approaches, i.e., SAXS and the solvatochromism of the probe 4-AP, can be used in a complementary way to enhance our understanding of the interfacial fluidity of RMs, a parameter that is difficult to measure directly.

RESUMO

In the present work we show how two biocompatible solvents, methyl laurate (ML) and isopropyl myristate (IPM), can be used as a less toxic alternative to replace the nonpolar component in a sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) formulation. In this sense, the micropolarity and the hydrogen-bond ability of the interface were monitored through the use of the solvatochromism of a molecular probe (1-methyl-8-oxyquinolinium betaine, QB) and Fourier transform infrared spectroscopy (FTIR). Our results demonstrate that the micropolarity sensed by QB in ML RMs is lower than in IPM RMs. Additionally, the water molecules form stronger H-bond interactions with the polar head of AOT in ML than in IPM. By FTIR was revealed that more water molecules interact with the interface in ML/AOT RMs. On the other hand, for AOT RMs generated in IPM, the weaker water-surfactant interaction allows the water molecules to establish hydrogen bonds with each other trending to bulk water more easily than in ML RMs, a consequence of the dissimilar penetration of nonpolar solvents into the interfacial region. The penetration process is strongly controlled by the polarity and viscosity of the external solvents. All of these results allow us to characterize these biocompatible systems, providing information about interfacial properties and how they can be altered by changing the external solvent. The ability of the nontoxic solvent to penetrate or not into the AOT interface produces a new interface with attractive properties.