RESUMO
BACKGROUND: Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyse the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behaviour of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests. METHODS: Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group). RESULTS: There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p < 0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations. CONCLUSIONS: Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs.
Assuntos
Dente Pré-Molar/fisiologia , Mandíbula , Colo do Dente/fisiologia , Fraturas dos Dentes/cirurgia , Adulto , Fenômenos Biomecânicos , Resinas Compostas , Restauração Dentária Permanente/métodos , Análise do Estresse Dentário/métodos , Análise de Elementos Finitos , HumanosRESUMO
BACKGROUND: The present study analysed the effects of different occlusal loading on premolars displaying various non-carious cervical lesions morphologies, restored (or not) with composites, by 3D finite element analysis. METHODS: A three-dimensional digital model of a maxillary premolar was generated using CAD software. Three non-carious cervical lesions morphological types were simulated: wedged-shaped, saucer and mixed. All virtual models underwent three loading types (100 N): vertical, buccal and palatal loading. The simulated non-carious cervical lesions morphologies were analysed with and without restorations to consider specific regions, such as the occlusal and gingival walls as well as the depth of the lesions. Data summarizing the stress distribution were obtained in MPa using Maximum Principal Stress. RESULTS: Palatal loads were responsible for providing the highest values of accumulated tensile stress on the buccal wall; 27.66 MPa and 25.76 MPa for mixed and wedged-shaped morphologies, respectively. The highest tensile values found on non-carious cervical lesions morphologies restored with composite resin were 5.9 MPa in the mixed morphology, similar to those found on sound models despite their morphologies and occlusal loading. CONCLUSIONS: The various non-carious cervical lesions morphologies had little effect on stress distribution patterns, whereas the loading type and presence of composite restorations influenced the biomechanical behaviour of the maxillary premolars.
Assuntos
Força de Mordida , Resinas Compostas/química , Restauração Dentária Permanente/métodos , Análise de Elementos Finitos , Imageamento Tridimensional/métodos , Colo do Dente/fisiopatologia , Desgaste dos Dentes/fisiopatologia , Dente Pré-Molar/fisiopatologia , Fenômenos Biomecânicos , Análise do Estresse Dentário/métodos , Módulo de Elasticidade , Humanos , Maxila , Modelos Anatômicos , Modelos Biológicos , Estresse Mecânico , Resistência à Tração , Interface Usuário-ComputadorRESUMO
The aim of this study was to investigate the biomechanical behaviour of maxillary premolar teeth regarding root morphology and abfraction depth, submitted to axial and oblique occlusal load. The investigation was conducted using 3D finite element analysis and strain gauge test. Sound maxillary premolar single and double root were selected for 3D model generation. The teeth were scanned for external morphology data acquisition. The 3D geometry was stored in *.STL and exported to Bio-CAD software (Rhinoceros-3D) to model generation. Mesh generation, mechanical properties and boundary conditions were performed in finite element software (Femap, Noran Engineering, USA). Twelve models were generated: sound tooth, 1.25 and 2.5 mm abfraction teeth. 100N compressive static load was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauges were bonded on the teeth mounted in a mechanical testing machine. Von Mises criterion showed that the double-root teeth associated with 2.5 mm abfraction and oblique loading presented higher stress values. Axial loading associated with single-root teeth propitiated the lowest stress rates. Double root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed the highest strain values (µS): 692.6, 1043.31 and 1236.14, respectively. Single root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed 467.10, 401.51 and 420.98 strain values, respectively. Axial loading showed lower strain rates, ranging from 136.12 to 366.91. The association of deep lesions, oblique loading and double-root tooth promoted higher stress and strain concentration.
Assuntos
Dente Pré-Molar/fisiopatologia , Força de Mordida , Análise do Estresse Dentário/métodos , Estresse Mecânico , Raiz Dentária/fisiopatologia , Fenômenos Biomecânicos , Análise de Elementos Finitos , Humanos , Imageamento Tridimensional , MaxilaRESUMO
BACKGROUND: The aim of this study was to measure the effect of simulating two different loads on maxillary incisors displaying eight morphological types of non-carious cervical lesions, unrestored and restored with an adhesive restoration, by quantifying the stress distributions generated using finite element analysis. METHODS: Virtual models of maxillary incisors were generated using the CAD software (RhinoCeros). After composing virtual dental and supporting structures with and without non-carious cervical lesions, each model was meshed using a control mesh device (ANSYS Finite Element Analysis Software). All of the virtual models were subjected to two load types, oblique load and vertical load, to simulate occlusal forces of 100 N each. Comparisons were made between simulated teeth with non-carious cervical lesions, with and without composite resin restorations, and a simulated sound tooth. Data summarizing the stress distributions were obtained in MPa using von Mises criteria. RESULTS: Oblique loading on simulated non-carious cervical lesions resulted in greater stress concentration compared with vertical loading, and non-carious cervical lesions with acute angles displayed higher stress concentrations at the depth of the lesion. Restoring the lesions with an adhesive restoration, such as composite resin, appeared to overcome this stress concentration. CONCLUSIONS: Restoring NCCLs with adhesive restorative materials, such as a nanohybrid composite resin, appears to recover the biomechanical behaviour similar to sound teeth.
Assuntos
Força de Mordida , Análise do Estresse Dentário/métodos , Incisivo/fisiopatologia , Abrasão Dentária/fisiopatologia , Colo do Dente , Fenômenos Biomecânicos/fisiologia , Resinas Compostas/uso terapêutico , Materiais Dentários/uso terapêutico , Análise de Elementos Finitos , Humanos , Maxila , Resistência à Tração , Abrasão Dentária/patologia , Abrasão Dentária/terapiaRESUMO
AIM: To investigate ex vivo the influence of post system and amount of remaining coronal tooth tissue on the fracture resistance, fracture mode and strain of root filled molar teeth. METHODOLOGY: Seventy mandibular human molar teeth were divided into seven groups (n = 10), one control (sound teeth) and six experimental groups resulting from the interaction between the two study factors: post system (Pa, post absence; Gfp, glass fibre post; Cmp, cast Ni-Cr alloy post and core) and amount of remaining coronal tooth tissue (Fe, 2 mm of ferrule; NFe, no ferrule). Teeth in the experimental groups were restored with metal crowns. For the strain gauge test, two strain gauges per sample were attached on the buccal and proximal root surfaces, and the samples of each group (n = 5) were submitted to a load of 0-100N. Fracture resistance (N) was assessed in a mechanical testing device (n = 10). Strain gauge and fracture resistance data were analysed by two-way anova (3 × 2) followed by the Tukey's HSD and Duncan's test (α = 0.05). The failure mode was evaluated using an optical stereomicroscope and classified according to the location of the failure. RESULTS: The absence of ferrule was associated with lower fracture resistance regardless of the post system. Groups restored with glass fibre post and cast Ni-Cr alloy post and core had similar fracture resistance and higher values than groups without posts, regardless of the remaining coronal tooth tissue. Teeth with no ferrule and cast Ni-Cr alloy post and core resulted in catastrophic fractures and those with no ferrule and glass fibre post or no ferrule and post absence resulted in restorable failures. Buccal strain was higher in sound teeth and lower in teeth without posts. Glass fibre post insertion decreased the buccal strain compared to the teeth with ferrule and absence of post. CONCLUSIONS: Two millimetre of ferrule had a significant influence on cusp strain, fracture resistance and failure mode. The glass fibre post was as effective as the cast Ni-Cr alloy post and core in the restoration of root filled molars regardless of the remaining tooth tissue. Absence of a post decreased the fracture resistance and increased the cusp strain.
Assuntos
Planejamento de Prótese Dentária , Falha de Restauração Dentária , Técnica para Retentor Intrarradicular/instrumentação , Coroa do Dente/patologia , Fraturas dos Dentes/prevenção & controle , Fenômenos Biomecânicos , Ligas Dentárias , Análise do Estresse Dentário , Vidro , Humanos , Mandíbula , Dente Molar , Tratamento do Canal Radicular/instrumentação , Tratamento do Canal Radicular/métodos , Estresse MecânicoRESUMO
AIM: To test the hypothesis that the presence of an anti-rotation device (ARD) and its location can influence the biomechanical behaviour of root filled teeth restored with cast post-and-cores and metallic crowns. METHODOLOGY: Fifth two bovine incisor roots were selected and divided into four groups (n = 13): Nd- without ARD; Bd- buccal ARD; Ld- lingual ARD; BLd- buccal and lingual ARD. The specimens were restored with cast post-and-cores and metallic crowns. After a fatigue process (3 x 10(5) 50 N), three strain gauges were attached on the buccal, lingual and proximal surfaces and the samples of each group (n = 3) were submitted to a 0-100 N load. Fracture resistance was assessed in a mechanical testing machine (n = 10). Strain values and fracture resistance data were analysed by one-way anova and Tukey Honestly Significant Difference (HSD) test (alpha = 0.05). The failure mode was then evaluated under an optical stereomicroscope. Bidimensional models of each group were generated for finite element analysis (FEA) and analysed using the von Mises criteria. RESULTS: No significant difference in fracture resistance values and fracture modes occurred between the four groups. The BLd group had higher stress concentrations in the buccal dentine and higher strain values on the proximal surfaces. CONCLUSIONS: The anti-rotation devices did not influence significantly the fracture resistance and fracture mode. However, the stress-strain values were increased when the anti-rotation device was prepared on the buccal and lingual faces concomitantly.
Assuntos
Análise do Estresse Dentário , Técnica para Retentor Intrarradicular/instrumentação , Dente não Vital/fisiopatologia , Animais , Fenômenos Biomecânicos , Bovinos , Coroas , Análise do Estresse Dentário/métodos , Análise de Elementos Finitos , Rotação , Fraturas dos Dentes/prevenção & controleRESUMO
The effect of gamma irradiation therapy on the ultimate tensile strength (UTS) of enamel and dentin in relation to prism orientation, dentin tubule orientation, and location is unknown. It was hypothesized that tubule and prism orientation, location, and irradiation have an effect on the UTS of dental structures. Forty human third molars were used, half of which were subjected to 60 Gy of gamma irradiation, in daily increments of 2 Gy. The specimens were evaluated by microtensile testing. Results showed that irradiation treatment significantly decreased the UTS of coronal and radicular dentin and of enamel, regardless of tubule or prism orientation. With or without irradiation, enamel was significantly stronger when tested parallel to its prismatic orientation. Coronal and radicular dentin of non-irradiated specimens presented significantly higher UTS when tested perpendicularly to tubule orientation. However, when the teeth were irradiated, the influence of tubule orientation disappeared, demonstrating that irradiation is more harmful to organic components.
Assuntos
Irradiação Craniana/efeitos adversos , Esmalte Dentário/efeitos da radiação , Dentina/efeitos da radiação , Raios gama/efeitos adversos , Colágeno/efeitos da radiação , Cristalização , Esmalte Dentário/ultraestrutura , Análise do Estresse Dentário , Dentina/ultraestrutura , Humanos , Resistência à TraçãoRESUMO
Microtensile bond strength values are influenced by specimen shape and attachment method to the gripping device during testing. We hypothesized that stress distribution inside the testing specimen is affected by microtensile specimen shape and attachment method. Rectangular, hourglass-, and dumbbell-shaped specimens, all with a 1 mm(2) cross-sectional testing region, were modeled as indirect ceramic restorations luted to dentin. Three specimen attachments were investigated: (1) posterior surface; (2) posterior, superior, and lateral surfaces; and (3) all surfaces. Qualitative and quantitative analyses were carried out according to von Mises' criteria. Stress analysis showed a direct correlation between attachment modes and stress distribution, with shear stresses observed in models with less surface attachment. Increasing the number of faces for specimen attachment to the metallic gripping device resulted in a more homogeneous and regular distribution of stress, with tensile stress concentrated at the adhesive interface. Dumbbell-shaped specimens showed improved stress distribution compared with rectangular and hourglass-shaped specimens.