RESUMO

Magnetic bismuth ferrite (BiFO) microparticles were employed for the first time for the removal of polystyrene (PS) nano/microplastics from the drinking water. BiFO is formed by porous agglomerates with sizes of 5-11 µm, while the PS nano/microparticles have sizes in the range of 70-11000 nm. X-ray diffraction studies demonstrated that the BiFO microparticles are composed of BiFeO3/Bi25FeO40 (the content of Bi25FeO40 is ≈ 8.6%). Drinking water was contaminated with PS nano/microparticles (1 g L-1) and BiFO microparticles were also added to the contaminated water. Later, the mixture of PS-particles + BiFO was irradiated with NIR light (980 nm). Consequently, PS nano/microparticles melted on the BiFO microparticles due to the excessive heating on their surface. At the same time, the NIR (near infrared) light generated oxidizing agents (∙OH and h+), which degraded the by-products formed during the photocatalytic degradation of PS nano/microparticles. Subsequently, the NIR irradiation was stopped, and a Neodymium magnet was utilized to separate the BiFO microparticles from the water. This last procedure also permitted the removal of PS nano/microparticles by physical adsorption. Zeta potential measurements demonstrated that the BiFO surface was positively charged, allowing the removal of the negatively charged PS nano/microparticles by electrostatic attraction. The combination of the photocatalytic process and the physical adsorption permitted a complete removal of PS nano/microparticles after only 90 min as well as a high mineralization of by-products (≈95.5% as confirmed by the total organic carbon measurements). We estimate that ≈23.6% of the PS nano/microparticles were eliminated by photocatalysis and the rest of PS particles (≈76.4%) by physical adsorption. An outstanding adsorption capacity of 195.5 mg g-1 was obtained after the magnetic separation of the BiFO microparticles from the water. Hence, the results of this research demonstrated that using photocatalysis + physical-adsorption is a feasible strategy to quickly remove microplastic contaminants from the water.

Assuntos

RESUMO

ABSTRACT Turnera sidoides (x=7) is one of the few well-studied South American autopolyploid complexes. Since polyploidy has played a prominent role within this complex, ongoing studies in T. sidoides focus on understanding the mechanisms involved in the origin and the establishment of polyploids using integrative approaches. This paper synthesises the results of more than 20 years of research on this topic. Cytogenetics analysis provided evidences for the production of unreduced male and female gametes, supporting the hypothesis of bilateral sexual polyploidization as the mechanism of origin of polyploids in T. sidoides. The finding of viable triploids suggested that unilateral sexual polyploidization could also be an important mechanism for the origin of tetraploids in T. sidoides. The occurrence of plants continuously forming many unreduced gametes would play a key role in the establishment of neopolyploids in natural populations. Also, the higher number of propagules that tetraploids contribute to subsequent generations, the ability to multiply asexually by rhizomes, and the occurrence of occasional cases of self-compatibility and successful illegitimate crosses in polyploids increase the likelihood that a low frequency of neopolyploids can be maintained in natural populations of T. sidoides. In addition, integration of cytogeographic and genetic divergence data together with past niche modelling provided further insights supporting the hypothesis that historical climatic and geomorphological events provided favourable conditions for the establishment of autopolyploids, with the wider distribution of tetraploids of T. sidoides being the result of their range expansion.

RESUMEN Turnera sidoides (x=7) es uno de los pocos complejos autopoliploides sudamericanos bien estudiados. Como la poliploidía ha tenido un papel destacado en el complejo, los estudios en curso en T. sidoides se centraron en la comprensión de los mecanismos implicados en el origen y el establecimiento de los poliploides mediante diferentes enfoques. En este trabajo se sintetizan los resultados de más de 20 años de investigación sobre este tema. El análisis citogenético proporcionó evidencias de la producción de gametos masculinos y femeninos no reducidos, sustentando la hipótesis de la poliploidización sexual bilateral como mecanismo de origen de los poliploides en T. sidoides. Sin embargo, el hallazgo de triploides fértiles sugirió que la poliploidización sexual unilateral también sería un mecanismo importante de origen de tetraploides en T. sidoides. La ocurrencia de plantas que forman continuamente gametos no reducidos desempeñaría un papel clave en el establecimiento de neopoliploides. Además, el mayor número de propágulos que los tetraploides aportan a las siguientes generaciones, la capacidad de multiplicación asexual por rizomas y los casos ocasionales de autocompatibilidad y cruzamientos ilegítimos exitosos aumentarían la probabilidad de que se mantenga una baja frecuencia de neopoliploides en las poblaciones naturales de T. sidoides. Asimismo, la integración de datos citogeográficos y de divergencia genética junto con el modelado de nicho en el pasado aportó información que sustenta la hipótesis de que los eventos climáticos y geomorfológicos históricos proporcionaron las condiciones favorables para el establecimiento y expansión de los tetraploides de T. sidoides.

RESUMO

Resumen La actividad cafetalera en Costa Rica procesa aproximadamente 69.000 toneladas de café mediante la técnica de beneficiado húmedo. Esta actividad conlleva un alto impacto ambiental debido a la generación de8Lde agua residual/kg de café oro producido. El presente trabajo tiene como objetivo utilizar el agua residual del procesamiento de café como sustrato en celdas combustibles microbianas (CCM), con el propósito de generar energía eléctrica a través de su uso y, a la vez, disminuir la carga orgánica del residuo. La CCM empleó un cátodo modificado con ftalocianinas de hierro (FePc), generó una eficiencia coulómbica de 0,7% y una densidad de potencia de 89 UW/ cm2 en un ciclo de operación de cinco días. Además, se determinó que la CCM disminuye la demanda química de oxígeno (DQO) del residuo hasta en 27% bajo las condiciones de operación nativas del sustrato, a temperatura ambiente, sin mediadores químicos para la reacción anódica y con el uso de electrodos de platino para el cátodo. El estudio confirma la oportunidad de emplear el sustrato con una flora microbiana nativa apta para la operación de la tecnología de la CCM, y así perfilar el dispositivo como una opción novedosa para el tratamiento de este residuo en Costa Rica.

Abstract In Costa Rica coffee production is the most traditional agroindustrial activity, each year approximately 69,000 tons of coffee are processed through the technique of wet processing. The process has a high environmental impact since it generates eight liters of wastewater/kg of produced coffee. Consequently, the main goal of this research was to evaluate the electric generation of a Microbial Fuel Cell (MFC) with two chambers, using coffee wastewater as a substrate, which would generate a sustainable solution with an added economic value to this waste in Costa Rica. The MFC with a cathode modified with iron phthalocyanines (FePc) generated a coulombic efficiency of 0.7% and a power density of 89 -uW/cm2 in a 5-day operation cycle. In addition, it was determined that the MFC decreases the COD of the waste by up to 27% under native substrate conditions, without the use of high temperatures, or chemical mediators for the anodic reaction and platinum electrodes for the cathode chamber. The efficiency of the device can be improved with changes at design level that reduce the ohmic internal resistance and improve electrical generation, the study confirms the potential of the substrate with a native microorganism suitable for the use of MFC technology, shaping the device as a novelty option for the treatment of the waste in Costa Rica.

Resumo A indústria do café na Costa Rica processa cerca de 69 000 toneladas de café por meio da técnica de moagem úmida, o que acarreta um alto impacto ambiental devido à geração de 8 L de água residual / kg de café dourado. O objetivo deste trabalho era usar águas residuais do processamento do café como substrato em Células de Combustível Microbianas (CCM) a fim de gerar energia elétrica por meio do seu aproveitamento e ao mesmo tempo reduzir a carga orgânica do resíduo. CCM usando cátodo modificado com ftalocianinas de ferro (FePc) gerou uma eficiência coulômbica de 0,7% e uma densidade de potência de 89 uW/cm2 em um ciclo operacional de cinco dias. Além disso, foi determinado que o CCM reduz a Demanda Química de Oxigénio (DQO) do resíduo em até 27% nas condições nativas de operação do substrato, à temperatura ambiente, sem mediadores químicos para a reação anódica e com a utilização de eletrodos de platina para o cátodo. O estudo confirma a oportunidade de utilizar o substrato com flora microbiana nativa adequada para o funcionamento da tecnologia CCM e, assim, delinear o dispositivo como uma nova opção para o tratamento desses resíduos na Costa Rica.

RESUMO

OBJECTIVE: To assess the experience, prevalence, need for treatment and economic impact of caries among students 6-12 years old in four cities in Mexico. BASIC RESEARCH DESIGN: Cross-sectional clinical study. SETTING: Elementary public schools. PARTICIPANTS: 500 schoolchildren aged 6 to 12 years. METHOD: Oral clinical examinations using WHO criteria for caries in the primary (dmft) and permanent (DMFT) dentitions. MAIN OUTCOME MEASURES: Indicators of caries in the primary and permanent dentitions: experience, prevalence, severity and the Significant Caries Index. In addition, we calculated the treatment needs, dental care rate and cost of care. RESULTS: dmft in the primary dentition was 2.59±2.83, and DMFT was 0.82±1.44 in the permanent dentition. Caries prevalence reached 67.7% in the primary and 34.1% in permanent dentition. The treatment needs index was 85.9% and 91.3% in the primary and permanent dentitions, respectively; the dental care index was 13.9% and 8.5%, respectively. The cost of care for caries in the primary dentition was estimated at $22.087 millions of international dollars (PPP US$) when amalgam was the restorative material used, and PPP US$19.107 millions for glass ionomer. For the permanent dentition, the cost was PPP US$7.431 millions when amalgam was used and PPP US$7.985 millions when resin/composite was used as restorative material. CONCLUSIONS: The prevalence and experience of caries in the primary dentition were 50% greater than those of other studies carried out in Mexico. In the permanent dentition they were less. There is considerable need for the treatment of caries and minimal experience with restorative care. The cost of care for caries may be assumed to be high for a health system such as Mexico's.

Assuntos

RESUMO

Tobacco use has a negative impact on health due to its relationship with the development of high-mortality diseases, such as pulmonary cancer. However, the effect of cadmium (Cd), present in tobacco smoke, on the development of joint diseases has been scarcely studied. The objective of this review is to discuss the evidence regarding the mechanisms by which Cd exposure, through tobacco smoke, may lead to the development of osteoarthritis (OA), osteoporosis (OP), and rheumatoid arthritis (RA). There's evidence suggesting a string association between moderate to severe OA development and tobacco use, and that a higher blood concentration of Cd can trigger oxidative stress (OS) and inflammation, favoring cartilage loss. At the bone level, the Cd that is inhaled through tobacco smoke affects bone mineral density, resulting in OP mediated by a decrease in the antioxidant enzymes, which favors the bone resorption process. In RA, tobacco use promotes the citrullination process through Cd exposure and increases OS and inflammation. Understanding how tobacco use can increase the damage at the articular level mediated by a toxic metal, i.e., Cd, is important. Finally, we propose prevention, control, and treatment strategies for frequently disabling diseases, such as OA, OP, and RA to reduce its prevalence in the population.

Assuntos

RESUMO

This work presents the morphological, structural and photocatalytic properties of flexible graphene composites decorated with Ni@TiO2:W nanoparticles (TiNiW NPs) with an average size of 27 ± 2 nm. The TiNiW NPs were immobilized on the surface of a flexible graphene composite using a PVA-based slurry-paste (FG/TiNiW composite). The SEM study showed that the TiNiW NPs remained exposed on the surface of the FG/TiNiW composite, which benefited its photocatalytic activity. The photocatalytic performance for the degradation of acetaminophen (ACT) was evaluated using both the TiNiW powders and the FG/TiNiW composite, obtaining maximum degradation efficiencies of 100 and 86%, respectively, after 3 h under natural solar irradiation. The degradation of ACT was caused mainly by the reactive oxygen species such as OH radicals and h+, which was confirmed by scavenger experiments. Photoluminescence, XPS and absorbance experiments revealed that oxygen vacancy defects were created by i) doping the TiNiW NPs with W and by ii) introducing graphene into the composites. These defects enhanced the absorbance of light in the range of 400-800 nm, which in turn, promoted the photocatalytic degradation of ACT. Moreover, the reuse experiments confirmed that both the TiNiW NPs and FG/TiNiW composite were very stable for the degradation of ACT, since degradation efficiencies >82% were obtained after 4 reuse cycles for both photocatalysts. The experimental findings of this work demonstrate that the flexible TiO2/graphene composites are a feasible option for the removal of pharmaceutical contaminants from water using natural solar irradiation.

Assuntos

RESUMO

Osteoarthritis (OA) is the gradual loss of articular cartilage and involves several tissues, such as the synovial membrane, meniscus, ligaments, and adipose tissue known as Hoffa fat pad. There are largely unexplored factors that lead to OA development, such as the impact of exposure to heavy metals like cadmium (Cd) on the viability of cells in the knee joint tissue. The objective of this report was to identify the cell type with the highest susceptibility to Cd toxicity with respect to cell viability and death. Our findings showed that a concentration as low as 3 µM cadmium chloride for 12 h affects the viability of synovial cells, and a concentration of 10 µM affects Hoffa cells. Our results suggest that Cd can affect the viability of synovial and chondral cells primarily. In contrast, Hoffa cells were less susceptible, likely because Cd favors the production of pro-inflammatory cytokines before triggering their death as part of its damage mechanism at the articular level.

Assuntos

RESUMO

Piscirickettsia salmonis is a facultative intracellular bacterium that generates piscirickettsiosis affecting salmonids in Chile. The bacterium has the adaptability to survive in the marine environment under multiple stressful conditions. In this sense, this work focused on the analysis of a gene battery associated with biofilm formation under different culture conditions and on the adaptability of this biofilm to different media. The results indicated that the strains LF-89, IBM-034 and IBM-040 were strong biofilm producers, evidencing adaptability to the media by increasing the amount of biofilm through successive growths. Transcript levels of six genes described in various bacteria and P. salmonis, considered to have metabolic functions, and playing a relevant role in biofilm formation, were analyzed to evaluate bacterial functionality in the biofilm. The genes mazE-mazF, implicated in biofilm and stress, were markedly overexpressed in the biofilm condition in the three strains. For its part, gene gltA, an indicator of metabolic activity and related to virulence inhibition in Salmonella typhimurium, also seems to restrain the pathogenesis process in P. salmonis by inhibiting the expression of the virulence-associated genes liso and tcf. Finally, the expression of the glnA gene suggests the use of glutamine as an essential element for the growth of the biofilm.

Assuntos

RESUMO

Cave shrimps of the Typhlatya genus are common and widespread in fresh, brackish and marine groundwater throughout the Yucatan Peninsula (Mexico). These species are ideal models to test niche partitioning within sympatric species in oligotrophic systems. Nevertheless, their food sources remain unidentified, and despite their frequency and functional importance, distribution and abundance patterns of these species within caves have not been fully recognized. Here, we describe the abundance of three Typhlatya species in different temporal and spatial scales, investigate changes in water conditions, and potential sources of carbon as an indication of food origin. Species composition and abundance varied markedly in space and time revealing patterns that differed from one system to another and in relation to environmental parameters. Isotope analysis showed that each species reflects a particular δ13C and Δ14C fingerprint, suggesting they feed in different proportions from the available carbon sources. Overall, our findings suggest a niche partitioning of habitat and feeding sources amongst the three Typhlatya species investigated, where environmental characteristics and physiological differences could play an important role governing their distribution patterns.

Assuntos