RESUMO

The vertical facial profile is a crucial factor for facial harmony with significant implications for both aesthetic satisfaction and orthodontic treatment planning. However, the role of single nucleotide polymorphisms (SNPs) in the development of vertical facial proportions is still poorly understood. This study aimed to investigate the potential impact of some SNPs in genes associated with craniofacial bone development on the establishment of different vertical facial profiles. Vertical facial profiles were assessed by two senior orthodontists through pre-treatment digital lateral cephalograms. The vertical facial profile type was determined by recommended measurement according to the American Board of Orthodontics. Healthy orthodontic patients were divided into the following groups: "Normodivergent" (control group), "Hyperdivergent" and "Hypodivergent". Patients with a history of orthodontic or facial surgical intervention were excluded. Genomic DNA extracted from saliva samples was used for the genotyping of 7 SNPs in RUNX2, BMP2, BMP4 and SMAD6 genes using real-time polymerase chain reactions (PCR). The genotype distribution between groups was evaluated by uni- and multivariate analysis adjusted by age (alpha = 5%). A total of 272 patients were included, 158 (58.1%) were "Normodivergent", 68 (25.0%) were "Hyperdivergent", and 46 (16.9%) were "Hypodivergent". The SNPs rs1200425 (RUNX2) and rs1005464 (BMP2) were associated with a hyperdivergent vertical profile in uni- and multivariate analysis (p-value < 0.05). Synergistic effect was observed when evaluating both SNPs rs1200425- rs1005464 simultaneously (Prevalence Ratio = 4.0; 95% Confidence Interval = 1.2-13.4; p-value = 0.022). In conclusion, this study supports a link between genetic factors and the establishment of vertical facial profiles. SNPs in RUNX2 and BMP2 genes were identified as potential contributors to hyperdivergent facial profiles.

Assuntos

RESUMO

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Assuntos

RESUMO

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Assuntos

RESUMO

OBJECTIVE: The aim of this study is to assess the microbial contamination of three different brands of esthetic elastomeric ligatures. MATERIALS AND METHODS: Different brands of esthetic ligatures (Unistick Pearl [American Orthodontics, Sheboygan, WI, USA], Power Sticks Pearl [Ortho Technology, Tampa, FL, USA], and Ease [Obscure, 3M Unitek, Monrovia, CA, USA]) were randomly assigned to permanent canines of 25 patients (aged 11-18 years) undergoing corrective orthodontic treatment. After 30 days, the ligatures were removed, processed, and the biofilm composition was analyzed by checkerboard DNA-DNA hybridization for 40 bacterial species. The microbiological data were analyzed using a nonparametric mixed model. RESULTS: The ligatures presented intense microbial contamination after 30 days, but no statistically significant differences were observed among the three groups (p > 0.05). The levels of the evaluated individual species and proportions of the microbial complexes showed no statistically significant differences among the ligature groups (p > 0.05). CONCLUSIONS: Esthetic elastomeric ligatures became multicolonized by several bacterial species after 30 days of exposure to the oral cavity. However, no relevant differences were observed among the biofilm composition formed on the different ligature brands.

Assuntos

RESUMO

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

RESUMO

BACKGROUND: Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. OBJECTIVE: to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. METHODOLOGY: This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. RESULTS: A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). CONCLUSION: The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Assuntos

RESUMO

Objective: To investigate the effects of maxillary orthodontic expansion on the alveolar bone tissue in adult patients treated with aligners by using cone-beam computed tomography. Methods: Thirty patients (22 females and 8 males; mean age: 36.3 years) were treated with Invisalign® aligners. Cone-beam computed tomography and digital models were obtained before (T0) and after (T1) upper arch expansion. The bone thicknesses in the cervical, middle, and apical areas of the incisors, canines, premolar, and first molars were buccally and palatally measured, totaling 96 areas and 2,880 measurements. The buccolingual inclinations and transverse measurements of the teeth were obtained from digital models to correlate them with the bone changes. The statistical tests used were Student's t-test, analysis of variance, and Pearson's correlation tests (p < 0.05). Results: From the 96 areas evaluated, 84 revealed an increase or stability in the alveolar bone thickness and twelve displayed significant bone loss. Bone changes did not correlate with the tooth inclination and transverse measurements. Conclusions: Within the limitation of the present study, mild levels of upper arch expansion obtained with Invisalign® aligners in adult patients did not result in any clinically significant loss of alveolar bone thickness.

RESUMO

BACKGROUND: This study evaluated if genetic variations in the WNT family members and RUNX2 are associated with craniofacial maturation, investigating dental and skeletal maturity in children and teenagers. METHODS: Radiographs from pre-orthodontic treatment of Brazilian patients (7 to 17 years-old) were used to assess dental (panoramic radiographs) and skeletal maturity (cephalometric radiographs). The chronological age (CA) was calculated based on the date of birth and the time the radiographs were performed. For the dental maturity analysis, the Demirjian (1973) method was used and a delta [dental age - chronological age (DA-CA)] was calculated. For the skeletal maturity analysis, the Baccetti et al. (2005) method was used and the patients were classified as "delayed skeletal maturation", "advanced skeletal maturation" or "normal skeletal maturation". DNA isolated from buccal cells was used for genotyping of two genetic variations in WNT family genes: rs708111 (G > A) in WNT3A and rs1533767 (G > A) in WNT11; and two genetic variations in RUNX2: rs1200425 (G > A) and rs59983488 (G > T). A statistical analysis was performed and values of p < 0.05 indicated a significant difference. RESULTS: There were no associations between dental maturity and genotypes (p > 0.05). In the skeletal maturity analysis, the allele A in the rs708111 (WNT3A) was statistically more frequent in patients with delayed skeletal maturation (Prevalence Ratio = 1.6; 95% Confidence Interval = 1.00 to 2.54; p-value = 0.042). CONCLUSIONS: The rs708111 in the WNT3A gene impacts on skeletal maturation.

Assuntos

RESUMO

AIM: Hormones play a crucial role in growth development; however, the impact of testosterone suppression (TS) on craniofacial growth during puberty remains inconclusive. This study aimed to evaluate the impact of TS during puberty on cephalometric measurements and histological characteristics of facial growth centers. MATERIALS AND METHODS: Thirty-six heterogenic Wistar male rats were randomly allocated into experimental orchiectomy (ORX) and control (sham) groups. At an age of 23 days (prepubertal stage), orchiectomy and placebo surgery were performed. Cephalometric measurements were performed via lateral cephalograms during and after puberty. The animals were euthanized at an age of 45 days (pubertal stage) and 73 days (postpubertal stage). Histological slices of the growth centers (condyle, premaxilla, and median palatine suture) were stained with hematoxylin and eosin, and sirius red. Student's t or Mann-Whitney U tests were used to compare linear and angular cephalometric measurements across groups (α error = 5%). RESULTS: Linear and angular measurements were statistically different in ORX animals (cranial bones, maxilla, and mandible) at 45 days and 73 days. Condylar histology showed a decrease in prechondroblast differentiation and a delay of mineralization in ORX animals. Vascularization of the medium palatine suture was lower in the ORX group at 45 days. Type I and III collagen fiber synthesis was lower in the ORX groups. In the premaxillary suture, collagen fibers were better organized in the sham groups. CONCLUSIONS: Our results suggest that testosterone suppression affects craniofacial growth during puberty.

Assuntos

RESUMO

BACKGROUND: The aim of this in vivo study was to quantitatively evaluate pain after rapid maxillary expansion (RME) in young rats by analyzing the activation of nociception-related structures, that is, the caudalis, interpolaris, and oralis subnuclei, according to the Fos expression. METHODS: A total of 65 Wistar rats were assigned to three groups: control group (n = 15) with no treatment, positive control group (n = 25), and experimental group (n = 25) with RME. The experimental animals were euthanized at 6, 12, 24, 48, and 72 hours after RME, and the brain was later carefully collected. Coronal sections through the spinal trigeminal caudalis, spinal trigeminal interpolaris, and spinal trigeminal oralis were cut (thickness of 40 µm) on a cryostat and processed for Fos immunohistochemistry. Images from the sections were captured under light microscopy, and ImageJ software was used to count Fos-like immunoreactive neurons. The Analysis of variance (ANOVA) and Tukey test were used for statistical analysis, and the significance level was set at 5%. RESULTS: RME induced incisor distalization and opening of the midpalatal suture, as well as neuronal activation of the spinal trigeminal nucleus. The experimental group demonstrated significantly more Fos-positive neurons in subnuclei caudalis and subnuclei interpolaris 6 hours after the maxillary expansion. The Fos immunoreactivity significantly decreased at 12 hours and increased again at 24 and 48 hours (P < 0.001). CONCLUSIONS: The RME increases the neural activation of brain regions involved in the nociception region, as determined by the Fos expression. The most intense Fos-like immunoreactive expression was detected in the brain 6 hours after the start of the palatal expansion.

Assuntos