RESUMO

The need for a sustainable and circular bioeconomy model is imperative due to petroleum non-renewability, scarcity and environmental impacts. Biorefineries systems explore biomass to its maximum, being an important pillar for the development of circular bioeconomy. Polyhydroxyalkanoates (PHAs) can take advantage of biorefineries, as they can be produced using renewable feedstocks, and are potential substitutes for petrochemical plastics. The present work aims to evaluate the current status of the industrial development of PHAs production in biorefineries and PHAs contributions to the bioeconomy, along with future development points. Advancements are noticed when PHA production is coupled in wastewater treatment systems, when residues are used as substrate, and also when analytical methodologies are applied to evaluate the production process, such as the Life Cycle and Techno-Economic Analysis. For the commercial success of PHAs, it is established the need for dedicated investment and policies, in addition to proper collaboration of different society actors.

Assuntos

RESUMO

Due to their widespread occurrence and the inadequate removal efficiencies by conventional wastewater treatment plants, emerging contaminants (ECs) have recently become an issue of great concern. Current ongoing studies have focused on different physical, chemical, and biological methods as strategies to avoid exposing ecosystems to significant long-term risks. Among the different proposed technologies, the enzyme-based processes rise as green biocatalysts with higher efficiency yields and lower generation of toxic by-products. Oxidoreductases and hydrolases are among the most prominent enzymes applied for bioremediation processes. The present work overviews the state of the art of recent advances in enzymatic processes during wastewater treatment of EC, focusing on recent innovations in terms of applied immobilization techniques, genetic engineering tools, and the advent of nanozymes. Future trends in the enzymes immobilization techniques for EC removal were highlighted. Research gaps and recommendations on methods and utility of enzymatic treatment incorporation in conventional wastewater treatment plants were also discussed.

RESUMO

The high costs of bioplastics' production may hinder their commercialization. Development of new processes with high yields and in biorefineries can enhance diffusion of these materials. This work evaluated the production of polyhydroxybutyrate (PHB) from the combination of milled corn starchy fraction hydrolysate and crude glycerol as substrates by the strain Cupriavidus necator LPB 1421. After optimization steps, maximum accumulation of 62 % of PHB was obtained, which represents 11.64 g.L-1 and productivity of 0.162 g.Lh-1. In a stirred tank bioreactor system with 8 L of operational volume, 70 % of PHB accumulation was reported, representing 14.17 g.L-1 of the biopolymer with 0.197 g.Lh-1 productivity. PHB recovery was conducted using a chemical digestion method, reaching >99 % purity. Therefore, the potential application of milled corn as substrate for PHB production was confirmed. The developed bioplastic process could be coupled to a bioethanol producing unit creating the opportunity of a sustainable and economic biorefinery.

Assuntos

RESUMO

Cellulose is a potential resource to be recovered from wastewater treatment plants (WWTP). Enzyme formulations can be employed to hydrolyze cellulose into fermentable sugars, to be further used as biochemical building blocks or reducing its recalcitrance to further treatment processes. This study proposed the production, recovery and formulation of cellulase using domestic wastewater as culture medium and its application for the hydrolysis of cellulosic residues recovered from WWTPs. Cellulose was recovered from raw sanitary wastewater using a fine-mesh sieve (0.35 mm) and quantified through enzymatic hydrolysis and thermogravimetric analysis. The production, concentration and formulation of cellulase enzyme resulted in an enzymatic blend of endoglucanases (7.3 UFP/mL), cellobiohydrolases (7.4 UCMC/mL) and beta-glucosidases (4.4 UBGL/mL). The content of the recovered cellulosic material was 21.3% according to enzymatic hydrolysis and 27.7 for thermogravimetric results. The enzymatic hydrolysis of the WWTP residue using the produced cellulase (107.6 ± 10.2 mgreduc/gresidue) showed better results than using the commercial cellulase complex (66.4 ± 2.5 mgreduc/gresidue). This fact showed the potential of application of the produced enzyme for the hydrolysis of cellulosic residues recovered from WWTP processes. In a non-waste biorefinery approach, the generated hydrolysate can be further used for producing added-value biomolecules including biofuels and biochemicals.

Assuntos

RESUMO

The sugarcane industry is one of the largest in the world and processes huge volumes of biomass, especially for ethanol and sugar production. These processes also generate several environmentally harmful solid, liquid, and gaseous wastes. Part of these wastes is reused, but with low-added value technologies, while a large unused fraction continues to impact the environment. In this review, the classic waste reuse routes are outlined, and promising green and circular technologies that can positively impact this sector are discussed. To remain competitive and reduce its environmental impact, the sugarcane industry must embrace technologies for bagasse fractionation and pyrolysis, microalgae cultivation for both CO2 recovery and vinasse treatment, CO2 chemical fixation, energy generation through the anaerobic digestion of vinasse, and genetically improved fermentation yeast strains. Considering the technological maturity, the anaerobic digestion of vinasse emerges as an important solution in the short term. However, the greatest environmental opportunity is to use the pure CO2 from fermentation. The other opportunities still require continued research to reach technological maturity. Intensifying the processes, the exploration of driving-change technologies, and the integration of wastes through biorefinery processes can lead to a more sustainable sugarcane processing industry.

Assuntos

RESUMO

Citric acid (CA) has been widely used in different industrial sectors, being produced through fermentation of low-cost feedstock. The development of downstream processes, easier to operate, environmentally friendly, and more economic than precipitation, is certainly a challenge in CA bioproduction. Large volumes of by-products generated in precipitation require treatment before disposal. Adsorption, extraction, and membrane separation have been shown to have a lower environmental impact than precipitation, but the technological maturity of these methods is still limited. However, reactive extraction and adsorption have great potential for industrial applications. This review shows that there is still much to be explored, both about the factors that are intrinsic to the techniques, but also in their combination for new processes' development. This review reports the most recent advances on CA bioproduction, with significant information about recovery and purification methods involving this highly industrially demanded organic acid.

Assuntos

RESUMO

Abstract Food supplements have been increasingly investigated. Probiotics have several benefits for human and animal health and selenium (Se) is widely recommended against oxidative stress. In this context, the aim of this study was to develop a low-cost bioprocess to produce a functional food product comprising both probiotic and Se accumulation. Yeast cells of Saccharomyces boulardii CCT 4308 were cultivated using sugarcane molasses as substrate. Optimization studies were performed to evaluate the best medium composition for biomass production and Se-accumulation in batch and fed-batch systems. Optimized conditions were defined with a medium composed of 150 g L-1 sugarcane molasses and 12 g L-1 yeast extract, with feeding of 100 g L-1 sugarcane molasses and 100 μg mL-1 of Se incorporation after 4 h and 10 h of fermentation, respectively, during 48 h in STR (stirred tank reactor). Best biomass production reached 14.52 g L-1 with 3.20 mg Se g-1 biomass at 12 h. Process optimization led to 4.82-fold increase in biomass production compared to initial condition. A final Se-enriched S. boulardii CCT 4308 biomass was obtained, which is comparable to commercial products. An alternative probiotic yeast biomass was efficiently produced as a new food-form of Se supplement in a sustainable process using an inexpensive agro-industrial residue.

Assuntos

RESUMO

The interest in biological peptides from Arthrospira sp. (syn Spirulina) is increasing due to its Generally Recognised as Safe "GRAS" status, the high concentration of proteins and the history of its use as a supplement and nutraceutical agent. Arthrospira peptides can be generated by the controlled hydrolysis of proteins, using proteases, followed by fractionation. The peptides obtained have a range of therapeutic effects. Amongst these bioactive peptides, three classes are of major importance: the antihypertensive (AHP), antimicrobial (AMP) and anticancer (ACP) peptides. AHPs have the ability to work as inhibitors of angiotensin-converting enzyme (ACE), and help to control several diseases such as hypertension, obesity, and cardiovascular issues, AMPs play a crucial role in the immune response, inhibiting the development of pathogens such as bacteria, fungi, viruses and others, while ACPs can aid in tumour control by the induction of apoptosis or necrosis, or the inhibition of angiogenesis. Thus, bioactive peptides are of great significance to the pharmaceutical industry. However, they can show secondary effects. This paper reviews the inhibition mechanism of antimicrobial, hypertensive and anticancer peptides from Arthrospira sp., and the possible structures of the peptides according to the type of activity and its intensity. In addition, this paper describes the purification methods of absorption mechanisms, and reviews databases for designing peptides.

Assuntos

RESUMO

Raw domestic wastewater was used as a culture medium for cellulase production in a bubble column reactor (6.2 UFP/mL, 64.6 U/L h) using the strain Trichoderma harzianum TRIC03-LPBII. Cellulases presented optimum pH and temperature between 4 and 5 and 50 and 70 °C, respectively. Enzymatic extract was concentrated through ultrafiltration and then a cellulolytic formulation was prepared with the addition of sorbitol (50% w/v) and benzoic acid (0.05% w/v). High cellulase stability of around 100% was reached after 30 days at 4 °C. The concentrated extract was also dried in a spray-dryer with the addition of maltodextrin at 20% (w/v), resulting in powder enzymatic formulation with 85% stability after 60 days. With these characteristics, the liquid and powder cellulase products have potential to be used in different industrial applications.

Assuntos

RESUMO

The sustainability of a biofuel is severely affected by the technological route of its production. Chemical pretreatment can be considered the traditional method of decomposition of the lignocellulose into its mono and oligomeric units, which can be further bioconverted to ethanol. The evaluation of the recent advances in chemical pretreatments of sugarcane bagasse, especially diluted acids, alkaline, organosolv and ionic liquids, identified the critical points for sustainability. In this context, chemicals recovery and reutilization or their substitution by green solvents, heat and electricity generation through bioenergy, reutilization of water from evaporators, vinasse concentration and the upgrading of lignin were discussed as strategic routes for developing sustainable chemical-based lignocellulose pretreatment. The advances in the technologies that allow greater fractionation of lignocellulosic biomass should be focused on the minimization of the use of natural resources, effluent generation and energy expenditure.

Assuntos