RESUMO

OBJECTIVES: To evaluate noncarious cervical lesions (NCCL) in older adults by analyzing each lesion's morphology, dimension, and occlusal risk factors using intraoral scanning and clinical evaluation. MATERIALS AND METHODS: Individuals over 60 treated at the School of Dentistry in Minas Gerais, Brazil, were invited to participate in this cross-sectional study. We clinically evaluated 1245 teeth for the presence of NCCL and dentin hypersensitivity (DH) in 53 individuals. Three-dimensional models were obtained using Omnicam, and occlusal risk factors were evaluated through the presence of wear facets, intense occlusal contacts, and interferences. The 3Shape 3DViewer software was used to classify NCCL morphology and to measure their height. NCCL depth, width, and area measurements were determined using ImageJ. Descriptive analyses were performed. The Kolmogorov-Smirnov test showed that quantitative data exhibited non-normal distribution. For bivariate analyses of quantitative data, the Mann-Whitney test was employed. The results were reported with mean, standard deviation, median, minimum, and maximum. For bivariate analyses of categorical data, the Pearson chi-square test was used. The results were reported with frequencies (counts) and percentages. A regression model evaluating the association between occlusal risk factors and the absence/presence of NCCL was built. RESULTS: Most participants were female (58.5%), with a mean age of 66. The frequency of NCCL was 28.27%, corresponding to 352 teeth. Of these, 68.18% exhibited saucer morphology and 31.82% wedge-shaped morphology. The frequency of DH was 13.92% in teeth with NCCL. Saucer NCCL exhibited significantly greater height (p = 0.02), while wedge-shaped lesions showed greater depth (p < 0.001). Also, teeth with NCCL had a higher proportion of wear facets (66.8%; p < 0.001), intense occlusal contacts (39.8%; p = 0.008), and occlusal interferences (21.9%; p = 0.05). The regression model showed that teeth with wear facets were 1.50 times more likely to exhibit NCCL than teeth without wear facets (p < 0.001). Teeth with intense occlusal contact were 1.22 times more likely to exhibit NCCL than teeth without intense occlusal contact (p = 0.031). CONCLUSIONS: NCCL is a common dental condition in the older adults evaluated in this study. Wedge-shaped NCCL exhibited greater depth, while saucer NCCL had more expressive height. Occlusal risk factors may represent a crucial mechanism for the occurrence of NCCL in this population. CLINICAL RELEVANCE: Understanding the mechanisms involved in developing NCCL is helpful in diagnostic and preventive practices. The study showed the importance of dental occlusion and characteristics of different NCCL morphologies that help the clinician in decision-making.

RESUMO

Oral and maxillofacial surgeons are among the frontline healthcare workers and are classified as a high-risk group for COVID-19 infection; however, it has not yet been defined how these professionals were impacted. The aim of this study was to explore the conducts and perceptions of oral and maxillofacial surgeons during the COVID-19 pandemic in Brazil. Nine individuals, mean age 34.8 years, 66.6% men, were included in the study. A semi-structured interview with a qualitative approach was applied to professionals belonging to a messaging application group (WhatsApp). Content analysis was performed in the light of Hellerian theory in its daily theoretical framework for the interpretation of the memories reported by the participants. Four themes were identified. The lack of knowledge about COVID-19 and the fear of being contaminated during care were the main factors responsible for changes in the professionals' work routine. An important point was the collective reflection of the participants about the increase in biosafety barriers, which ensured a greater sense of security. The need for social isolation to contain the virus was also described. As a result, there was a great distance between professionals and their families, which generated high levels of anxiety in the former. Repetitive reports of slowness and reduced attendance directly related to financial loss and aggravated stress were also highlighted. The findings of this study reveal that oral and maxillofacial surgeons had their professional-personal axis affected in terms of daily habits, family life and financial strain, aspects that were responsible for impacting stress and anxiety levels.

Assuntos

RESUMO

Aim The aim of this systematic review and meta-analysis was to analyse the clinical performance of GIOMER restorative composites and compare them with other conventional restorative materials in permanent teeth.Methods Searches in PubMed, Web of Science, Scopus, Ovid and Cochrane Library were conducted. Grey literature search was also performed. Clinical trials that evaluated the clinical performance of restorations with GIOMER restorative composites in permanent teeth compared to those using composite resin, glass ionomer cement, resin-modified glass ionomer cement (RMGIC) and other GIOMERs were included. Meta-analyses comparing GIOMER restorative composites with RMGIC at 6- and 12-month follow-ups and comparing two types of GIOMER were feasible.Results Ten studies fulfilled the inclusion criteria. In these studies, GIOMER was compared to different types of dental restoration materials. Dental restorations were evaluated by United States Public Health Service criteria in all included studies. Four studies were suitable for meta-analysis, which showed significant differences between GIOMER and RMGIC surface roughness at 6-month (odds ratio [OR] = 6.56; 95% confidence interval [CI] = 2.38-18.13) and 12-month (OR = 8.76; CI = 3.19-24.07) follow-ups. No significant differences between GIOMER restorative composites and RMGIC for marginal adaptation were found at 6- and 12-month follow-ups. When comparing two GIOMERs, significant differences were seen between Beautifil II and Beautifil Flowable Plus F00 for marginal staining (OR = 2.58; CI = 1.42-23.27; I2 = 0%) and surface roughness (OR = 4.59; CI = 1.11-18.97; I2 = 0%) at the 36-month follow-up. No significant differences between Beautifil II and Beautifil Flowable Plus F00 were seen for marginal adaptation and anatomic form at 6-, 18- and 36-month follow-ups.Conclusions GIOMER restorative composites presented similar performance concerning marginal adaptation and better surface roughness when compared to RMGIC. GIOMER Beautifil II presented similar performance to GIOMER Beautifil Flow Plus F00 concerning marginal adaptation and anatomic form and worse marginal staining and surface roughness when compared to Beautifil Flowable Plus F00.

RESUMO

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

RESUMO

OBJECTIVE: The aim of this systematic review and meta-analysis was to evaluate the experience of dental caries in individuals pre- or postliver transplant. MATERIALS AND METHODS: Searches in PubMed, Scopus, Web of Science, Ovid, and Lilacs from databases' inception date up to April 2020 were undertaken. Gray literature and manual searches were also conducted. Observational studies were eligible. The retrieved references were evaluated by two independent reviewers. Meta-analysis and risk of bias assessment using the University of Adelaide tool were conducted. The strength of the evidence was assessed with GRADE. RESULTS: The search retrieved 1990 references. Twenty-four cross-sectional studies were included. One subgroup analysis demonstrated no significant difference in the number of teeth with dental caries between pre-liver transplant and healthy individuals (mean difference = 1.65, confidence interval = -0.87 to 4.17). The prevalence of dental caries among pre-liver transplant individuals was 73.82% and in the post-transplant individuals was 72.83%. In the included studies, the main concern regarding risk of bias was the absence of control for confounding variables. The strength of the evidence was very low. CONCLUSIONS: Dental caries may be a relevant issue in pre- and postliver transplant individuals. Oral health counseling should be included in the care of pre- and/or postliver transplant individuals.

Assuntos

RESUMO

BACKGROUND: The aim of the present study was to investigate pain perception and anxiety within the context of surgery for the placement of mandibular block bone and to evaluate the causality effect between theses variables. MATERIAL AND METHODS: A total of 13 patients were recruited for the study and were submitted to mandibular autogenous block bone surgery. Demographic data were collected and the anxiety level was determined using the State-Trait Anxiety Inventory (STAI). The STAI was administered on the day of surgery and on the 14th postoperative day. Pain was determined using the visual analogue scale (VAS) and limitation of daily activities and postoperative symptoms were also reported. Data were analyzed using parametric tests (α=0.05) and cross-lagged analysis was performed to verify a causality effect. RESULTS: Few patients reported interference with daily activities or the presence of postoperative symptoms. A significant association of bad breath/taste with STAI-State was detected on the 14th postoperative day. No evidence of causality between STAI and VAS was detected. CONCLUSIONS: The patient's self-evaluation indicates that the pain and anxiety level felt during treatment was not directly associated with the clinical aspects of the surgical procedure or with postoperative activities/symptoms limitations. Key words:Anxiety pain, questionnaires, autogenous bone block, treatment, outcomes.

RESUMO

The MeX™ software is a useful tool for tridimensional data collection for surface evaluation and could be relevant to evaluate the same specimen in different phases of the study, assuming repeated measures of dental enamel roughness. The aim of this study was to evaluate the influence of sample metallization for dental enamel roughness analysis with 3D images reconstructed using MeX™ software from Scanning Electron Microscopy (SEM) images. The influence of 74.98% (%mol/mol) argon-oxygen plasma for carbon layer removal on surface roughness of the metallized specimen was also evaluated. Dental enamel specimens were prepared for SEM analysis with and without carbon metallization using conventional or environmental modes. Argon-oxygen plasma for carbon layer removal was used and surface roughness was re-evaluated. Roughness obtained by SEM and MeX™ reconstructed images, with or without metallization, did not differ. No significant alteration on surface roughness after carbon layer removal using plasma was found. SEM baseline evaluation using conventional mode without sample preparation and in environmental mode were not comparable. Roughness of enamel 3D images reconstructed with MeX™ software from SEM images, with or without metallization was similar. The 74.98% (%mol/mol) argon-oxygen plasma removed the carbon layer with no effect on enamel roughness.

RESUMO

Maxillofacial prosthetic rehabilitation is almost always indicated after surgical treatment of affected individuals with oral cavity and pharynx cancers. Few articles have described in detail the technical sequence of maxillofacial prosthesis fabrication. The first case is a 56-year-old woman who was rehabilitated with pharyngeal obturator prosthesis after a partial maxillectomy, including soft palate, tonsil, oropharynx, and retromolar space regions. The second case is an 83-year-old man who was rehabilitated with hard palatal obturator prosthesis after a maxillectomy, including hard palate and nasal floor. In both cases, the patients complained of oronasal regurgitation and difficulty in chewing, swallowing, and speaking. A multi-professional approach including oral rehabilitation should be part of the treatment plan for individuals with oral and pharyngeal cancer after tumor resection.

RESUMO

Dental implants are a common and successful option for the rehabilitation of edentulous areas. However, there are some limitations to their use. The present clinical report describes a 5-year follow-up of maxillary rehabilitation using an attachment-retained removable partial denture (RPD) associated with fixed partial denture (FPD) units as an alternative to orthodontic treatment associated with orthognathic surgery and dental implant placement. Rehabilitation with fixed prosthodontics associated with a removable partial prosthesis was proposed. For greater precision and stability, a gold attachment was prepared. The patient was very satisfied with the rehabilitation and has been clinically followed for 5 years. In cases where the use of dental implants and/or conventional FPDs is limited or not indicate the association between an FPD and an RPD by means of attachments remains an important alternative to conventional clasp-retained RPDs.

RESUMO

OBJECTIVE: To evaluate studies assessing the prevalence of dental caries and developmental defects of enamel (DDE) in individuals with chronic kidney disease (CKD) in comparison with individuals without CKD. MATERIALS AND METHODS: Electronic searches were performed in PubMed, Web of Science, Scopus, Medline via Ovid, and ProQuest databases from their inception date until February 2018. Two review authors independently selected the studies, extracted data, and assessed the methodological quality. Meta-analysis was performed. RESULTS: Twenty-seven studies were included in this study. For permanent teeth, 14 studies found that individuals without CKD had higher dental caries scores than those with CKD. However, only five studies presented results with a statistically significant difference between groups. Among the studies evaluating primary teeth, five showed that individuals without CKD had higher dental caries scores than those with CKD. Five studies showed that individuals with CKD had a significantly higher prevalence of DDE than individuals without CKD. The meta-analyses showed that individuals without CKD had significantly higher scores of dental caries teeth and surfaces than individuals with CKD. For DDE, no statistical difference between groups was observed. CONCLUSIONS: Individuals with CKD present lower dental caries scores and a higher prevalence of DDE in comparison with individuals without CKD.

Assuntos