RESUMO
Long-term performance of a scaled-up air-cathode microbial fuel cell (MFC) and toxicity removal were studied with dairy wastewater (DW) used as the substrate. The MFC in a semi-continuous flow was strategically inoculated with consortium of Shewanella oneidensis and Clostridium butyricum. The scaled-up approach delivered a maximum power density of 0.48 W/m3 (internal resistance of 73 Ω) removing 93% of total chemical oxygen demand and 95% of total biochemical oxygen demand at organic loading rate (OLR) of 0.9 kg COD/m3/d and hydraulic retention time (HRT) of 21 days. It also achieved high removal efficiency of nitrate (100%), organic nitrogen (57%), sulfate (90%) and organic phosphorus (90%). The power generation and DW degradation performance decreased with OLR of 1.8 kg COD/m3/d and HRT of 10.5 days. Furthermore, testing of acute toxicity with the microcrustacean, Daphnia similis, revealed high toxic effect of the raw DW, but no toxic effects of the MFC effluent during 95 days of operation. These outcomes demonstrated that scaled-up MFC fed with high-strength DW should be an effective system for pollutants removal and simultaneously energy recovery.
Assuntos
Fontes de Energia Bioelétrica , Águas Residuárias/microbiologia , Análise da Demanda Biológica de Oxigênio , Indústria de Laticínios , EletrodosRESUMO
Wastewater containing several dyes, including sulfur black from the dyeing process in a textile mill, was treated using a UV/H2O2 process. The wastewater was characterized by a low BOD/COD ratio, intense color and high acute toxicity to the algae species Pseudokirchneriella subcaptata. The influence of the pH and H2O2 concentration on the treatment process was evaluated by a full factorial design 22 with three replicates of the central experiment. The removal of aromatic compounds and color was improved by an increase in the H2O2 concentration and a decrease in pH. The best results were obtained at pH 5.0 and 6 g L(-1). With these conditions and 120 min of UV irradiation, the removal of the color, aromatic compounds and COD were 74.1, 55.1 and 44.8%, respectively. Under the same conditions, but using a photoreactor covered with aluminum foil, the removal of the color, aromatic compounds and COD were 92.0, 77.6 and 59.4%, respectively. Moreover, the use of aluminum foil reduced the cost of the treatment by 40.8%. These results suggest the potential application of reflective materials as a photoreactor accessory to reduce electric energy consumption during the UV/H2O2 process.