RESUMO
The potential of pyrolyzed Mytella falcata shells as an adsorbent for removing methylene blue dye molecules from aqueous solutions was investigated. The study found that the adsorbent produced at 600 °C of pyrolysis temperature, with an adsorbent mass of 0.5 g, particle diameter of 0.297-0.149 mm, and pH 12.0, demonstrated the highest dye molecule removal efficiency of 82.41%. The material's porosity was observed through scanning electron microscopy, which is favorable for adsorption, while Fourier-transform infrared spectroscopy and X-Ray diffraction analysis analyses confirmed the presence of calcium carbonate in the crystalline phases. The pseudo-second order model was found to be the best fit for the data, suggesting that the adsorption mechanism involves two steps: external diffusion and diffusion via the solid pores. The Redlich-Peterson isotherm model better represented the equilibrium data, and the methylene blue adsorption was found to be spontaneous, favorable, and endothermic. The hydrogen peroxide with UV oxidation was found to be the most efficient method of regeneration, with a regeneration percentage of 63% achieved using 600 mmol.L-1 of oxidizing agents. The results suggest that pyrolyzed Mytella falcata shells could serve as an ecologically viable adsorbent alternative, reducing the amount of waste produced in the local environment and at the same time removing pollutants from the water. The material's adsorption capacity remained almost constant in the first adsorption-oxidation cycles, indicating its potential for repeated use.
Assuntos
Azul de Metileno , Poluentes Químicos da Água , Termodinâmica , Azul de Metileno/química , Fotólise , Concentração de Íons de Hidrogênio , Temperatura , Cinética , Adsorção , Água , Poluentes Químicos da Água/químicaRESUMO
In the present work, the composite MgAl-LDH/biochar using activated carbon from bovine bone as support for the layered double hydroxide particles was successfully synthesised and used as an alternative adsorbent for caffeine removal from water. Kinetic studies showed that the equilibrium was achieved in only 20 min of contact between the adsorbent and the adsorbate. The pseudo-first-order model represented the experimental data more satisfactorily (R2 = 0.95), suggesting a physical adsorption process. The isotherms were performed at three temperatures, in which it was observed the decrease in the adsorption in higher temperatures. It was obtained a maximum adsorption capacity of 26.219 mg/g at 40 °C, and the experimental data were better adjusted by Redlich-Peterson, R2 > 0.9942. In short, the study demonstrated that the composite was satisfactorily synthesised and its use in the caffeine removal was quite attractive, being a potential adsorbent for water treatment applications.