RESUMO

O tratamento endodôntico de dentes com rizogênese incompleta requer uma atenção especial, uma vez que o tratamento convencional é inviável e devemos evitar a perda dos dentes permanentes. Na maioria das vezes, as causas que interrompem a formação radicular são os traumatismos dentários e as cáries extensas, que podem atingir a polpa coronária, podendo levar, inclusive, à necrose pulpar. Atualmente, esses casos têm sido tratados por meio da apicificação, apicogênese e da revascularização pulpar, com uso de medicações a base de hidróxido de cálcio, antibiótico e MTA (Agregado trióxido mineral). Nessas técnicas, a intenção é induzir o desenvolvimento radicular completo ou o fechamento apical por tecido duro calcificado. O objetivo deste trabalho foi realizar uma breve revisão de literatura, utilizando artigos científicos disponíveis nas plataformas Café (UFF), Scielo e PubMed, a fim de descrevermos os conceitos de apicificação, apicogênese e revascularização, expondo as suas indicações e condutas clínicas ideais para a realização destes tratamentos. Pode-se concluir que são procedimentos clínicos simples e de conhecimento extremamente importantes para qualquer cirurgião-dentista, uma vez que são tratamentos emergenciais bastante comuns no dia a dia. Além disso, sabe-se da necessidade de manter um dente permanente sadio na boca, que pode evitar grandes problemas no futuro.

Endodontic treatment on teeths with incomplete rhizogenesis requires special attention, since conventional treatment is infeasible and we must avoid the loss of permanent teeth. Most often, the causes that interrupt root formation are dental trauma and extensive caries, which can reach the coronary pulp and may even lead to pulpal necrosis. Currently, these cases have been treated through apexification, apexogenesis and pulpal revascularization, with the use of calcium hydroxide, antibiotic and MTA (Aggregate mineral trioxide) base medications. In these techniques, the intent is to induce complete root development or apical closure by calcified hard tissue. The objective of this work was to carry out a review of literature, using scientific articles available on the Café platform (UFF), Scielo and PubMed, in order to describe the concepts of apexification, apexogenesis and revascularization, exposing their indications and ideal clinical procedures for the realization of these treatments. It can be concluded that they are simple clinical procedures and of knowledge extremely important for any dentist, since they are emergency treatments that are quite common day by day. In addition, it is known that one needs to maintain a permanent healthy tooth in the mouth, which can avoid major problems in the future.

Assuntos

RESUMO

El tratamiento de dientes permanentes inmaduros necróticos constituye un desafío en la odontopediatría, y son múltiples las opciones terapéuticas propuestas para solucionar esta problemática. A tales efectos se realizó el presente estudio con el objetivo de exponer la evolución histórica de dicho tratamiento, para lo cual se efectuó una exhaustiva búsqueda bibliográfica. Se consideró como método general de la investigación el dialéctico-materialista y, de manera particular, los métodos de revisión documental histórico-lógico, de análisis-síntesis e inductivo-deductivo. A partir de determinados hitos históricos se establecieron 3 etapas, cada una de ellas con sus aportes y limitaciones; asimismo, se identificaron las regularidades y tendencias, así como los fundamentos que sustentan la necesidad de continuar investigando sobre nuevos enfoques terapéuticos.

The treatment of necrotic immature permanent teeth constitutes a challenge in the pediatric dentistry, and there are multiple therapeutic options to solve this problem. To such effects the present investigation was carried out with the objective of exposing the historical evolution of this treatment, reason why an exhaustive literature review was carried out. The dialectical-materialistic method was assumed as the general one of the investigation and in a particular way, the historical-logical, analysis-synthesis and inductive-deductive methods of documental review. Three stages were established based on certain historical landmarks, each one with its contributions and limitations; also, regularities and tendencies were identified, as well as the foundations that sustain the necessity to continue investigating on new therapeutic approaches.

Assuntos

RESUMO

Introduction: Regenerative endodontics is a developing field of dentistry and aims to recover the physiological and anatomical functions of the tooth for cases of severe dental caries, pulpal pathologies and dental trauma. Materials and Methods: This umbrella review seeks to discover the scientific evidence on the effectiveness and the factors result in successful regenerative endodontic therapies in teeth with necrotic pulps and with incomplete root development. The study was conducted following the PRISMA Guidelines. There were no restrictions regarding search period. A comprehensive literature search was carried out in EMBASE, LILACS, PubMed, Cochrane, Scopus, and Google Scholar. A quality evaluation was conducted by using AMSTAR-2. A descriptive analysis of the included systematic reviews and meta-analysis were conducted. Results: Thirteen descriptive systematic reviews and 7 meta-analyses were included. Three articles evidenced low methodological quality according to AMSTAR-2 tool. Overall success rates for the endodontic regeneration procedures ranged from 50% to 98% and the survival rates were between 94% and 100%. Pulp regeneration had a high success rate, evidenced by factors such as the resolution of symptoms, healing, increased root length, dentin thickening and recovery of sensitivity. Follow-up varied from 1 to 48 months for the original studies included in the systematic reviews and meta-analyses. Conclusions: Endodontic practice offers the clinician a good treatment option in case of necrotic pulp with immature roots such as the endodontic regeneration, that is supported by high and moderate quality scientific literature.

RESUMO

O tratamento endodôntico de dentes com rizogênese incompleta e necrose pulpar é considerado um desafio para a endodontia. Técnicas de apicificação e procedimentos endodônticos regenerativos têm sido empregados com o objetivo de preservar e/ou restabelecer as estruturas comprometidas por tal condição. Entretanto, não existe consenso na literatura a respeito da manutenção da resistência mecânica após ambas as técnicas. Ferramentas computacionais foram inseridas na odontologia para auxiliar na interpretação de determinadas condições dentárias. Dentre tais ferramentas, a análise por elementos finitos (FEA) tem sido executada garantindo a reprodução de modelos que representem características físicas semelhantes à estrutura real. Assim, este estudo analisou o comportamento mecânico de dentes incisivos (I) e pré-molares (PM) com rizogênese incompleta submetidos aos tratamentos de apicificação e procedimento endodôntico regenerativo através da metodologia de FEA. Os modelos foram elaborados em software CAD Rhinoceros 7.0® com base em tomografias computadorizadas, e foram compostos por esmalte, dentina, polpa, ligamento periodontal, osso cortical, osso medular, guta-percha, MTA, coágulo sanguíneo e resina composta. Os grupos do estudo foram: a) I-Controle positivo; b) I-Controle negativo; c) I-Procedimento endodôntico regenerativo; d) I-Apicificação; e) PM-Controle positivo; f) PM-Controle negativo; g) PM-Procedimento endodôntico regenerativo e h) PM-Apicificação. Com os modelos finalizados, foi realizada a exportação para software de análise por elementos finitos Ansys® (version 13.0; Ansys, Canonsburg, PA). Após o modelamento das estruturas, as geometrias foram exportadas no formato STEP 214 Automotive Design (STP) e importadas para o CAE (Computer Aided Engeneering) do Ansys® (version 13.0; Ansys, Canonsburg, PA). Os modelos foram submetidos a cargas de 200 N no terço incisal palatino e em um ponto localizado no terço médio da região palatina. O carregamento foi direcionado a 45° em relação ao plano oclusal. O pré-processamento e pós-processamento foram realizados pelo programa Ansys® v.13.0. Os resultados estão apresentados em gráficos de tensão máxima principal, com seus valores numéricos representados em escala de cores. Foi observado, no grupo dos incisivos, melhores resultados de força de tração e compressão para o tratamento com apicificação quando comparado ao tratamento de revascularização. No grupo dos pré-molares, foi observado que o grupo de revascularização foi, tanto para tração quanto para compressão, melhor avaliado quando comparado ao grupo de apicificação (AU)

The endodontic treatment of teeth with incomplete root formation is considered a challenge for endodontics. Apexification techniques and regenerative endodontic procedures have been used in order to preserve and/or restore the structures compromised by this condition. However, there is no consensus in the literature regarding the maintenance of mechanical strength after both techniques. Computational tools have been introduced into dentistry to assist in the interpretation of certain dental conditions. Among such tools, finite element analysis (FEA) has been performed ensuring the reproduction of models that represent physical characteristics similar to the real structure. Thus, this study analyzed the mechanical behavior of teeth with incomplete root formation submitted to apexification treatments and regenerative endodontic procedure through the FEA methodology. The models were elaborated in Rhinoceros 7.0® CAD software based on computed tomography, and were composed of enamel, dentin, pulp, periodontal ligament, cortical bone, medullary bone, gutta-percha, MTA, blood clot and composite resin. The study groups were: a) I-Positive Control; b) I-Negative control; c) I-Regenerative endodontic procedure; d) I-Apexification; e) P-Positive control; f) P-negative control; g) P-Regenerative endodontic procedure and h) P-Apexification. With the finished models, they were exported to Ansys® finite element analysis software (version 13.0; Ansys, Canonsburg, PA). After modeling the structures, the geometries were exported in STEP 214 Automotive Design (STP) format and imported into Ansys® Computer Aided Engineering (CAE) (version 13.0; Ansys, Canonsburg, PA). The models were subjected to loads of 200 N in the palatal incisal third and at a point located in the middle third of the palatal region. The loading was directed at 45° to the occlusal plane. Pre-processing and post-processing were performed by the program Ansys® v.13.0. The results are presented in graphs of maximum principal tension, with their numerical values represented in a color scale, where it was observed, in the incisor group, better results of traction and compression force for the treatment with apexification when compared to the revascularization treatment. In the premolar group, it was observed that the revascularization group was, for both traction and compression, better evaluated when compared to the apexification group. (AU)

Assuntos

RESUMO

El objetivo fue realizar una técnica de apexificación en una cita, evaluando clínica y radiográficamente la formación de barrera dura apical, con seguimiento a nueve meses, al utilizar material biocerámico en dien-tes permanentes jóvenes. Se trataron 30 incisivos su-periores permanentes con ápice abierto y anteceden-tes de trauma, en pacientes de ambos géneros y 18-40 años. Las piezas (n=30) se dividieron en dos grupos (n=15). Grupo experimental: tratamiento de apexifica-ción con EndoSequence Root Repair Material (EERR), y grupo control: tratamiento con impresión apical. Se determinaron distribuciones de frecuencias y esta-dísticas descriptivas para cada variable, según es-cala de medición y distribución. Se realizaron IC 95%, test de Chi cuadrado con cálculo de residuos estan-darizados ajustados y test de Fisher. Se fijó nivel de significación p=0.05. Las diferencias de manifestacio-nes preoperatorias y postoperatorias según grupo fueron no significativas (p Fisher = 0.9140) y (p Fisher = 0.992), respectivamente. No se hallaron diferencias entre proporciones de hallazgos radiológicos preope-ratorios según grupo. Medidas trimestralmente, no hubo diferencias significativas entre proporciones de piezas con continuidad de cortical ósea y radiolucidez periapical postoperatoria según grupo, (p Fisher = 0.7780) y (p Fisher = 0.7909), respectivamente. Debi-do la escasa cantidad de trabajos que reportan el uso de EERR para esta técnica, se requiere de nuevos en-sayos clínicos con tamaños muestrales amplios, para compararlo con otros materiales y técnicas, y deter-minar si su tasa de éxito a largo plazo es mayor que a de los materiales y técnicas usadas actualmente (AU)

To perform apexification technique in one appointment, clinically and radiographically evaluating the formation of apical hard barrier, with follow-up at nine months, when using bioceramic material in young permanent teeth. Materials and methods: 30 permanent upper incisors with open apex and history of trauma were treated, in patients of both genders and 18-40 years of ages. The teeth (n=30) were divided into two groups (n=15). Experimental group: apexification treatment was performed with EndoSequence Root Repair Material (EERR), control group: treatment with apical impression. Frequency distributions and descriptive statistics were determined for each variable according to scale of measurement and distribution. 95% CI, Chi-square test with calculation of adjusted standardized residuals and Fisher's test were performed. The level of significance p=0.05 was set. The differences in preoperative and postoperative manifestations according to group were not statistically significant (Fisher's p = 0.9140) and (Fisher's p = 0.992), respectively. No differences were found between proportions of preoperative radiological findings according to group. Measured quarterly, there were no significant differences between proportions of teeth with bone cortical continuity and with postoperative periapical radiolucency according to group, (p Fisher = 0.7780) and (p Fisher = 0.7909), respectively. Due to the small number of works that report its use for this technique, is necessary to carry out new clinical trials with larger sample sizes, to compare it with other materials and techniques, and determine if its success rate in the long term is greater than that of currently used materials and techniques (AU)

Assuntos

RESUMO

OBJECTIVES: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. MATERIALS AND METHODS: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. RESULTS: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). CONCLUSIONS: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

RESUMO

Introdução: Muitas substâncias têm sido utilizadas como irrigantes e curativos intracanal nos tratamentos de dentes com rizogênese incompleta, visando obter a regeneração pulpar. A clorexidina a 2% em associação com hidróxido de cálcio P.A. pode ser uma alternativa. Métodos: No presente caso clínico, o dente #45 com periodontite apical, em um paciente com 13 anos de idade, foi tratado com solução de clorexidina a 2% como irrigante. A clorexidina na forma de gel a 2% foi utilizada como auxiliar da instrumentação e, em associação com o hidróxido de cálcio, foi utilizada como curativo durante 14 dias. Após esse período, o canal foi irrigado com solução fisiológica e, sob anestesia alveolar mandibular, uma lima K #70 foi utilizada ultrapassando levemente o ápice, para causar sangramento. Após observar que o sangue dentro dos canais alcançou a porção cervical, o cimento biocerâmico MTA Branco foi colocado na porção cervical do canal. Resultados: A apicificação e o desenvolvimento da raiz em comprimento e largura puderam ser observados já no controle de três meses, e continuaram até a última revisão, no controle de um ano. Alterações de cor não foram observadas nese período de acompanhamento. Conclusões: A clorexidina associada ao hidróxido de cálcio pode ser uma alternativa aos procedimentos de regeneração pulpar (AU).

Introduction: Many substances have been used as irrigating solutions to promote pulp regeneration and root development in teeth with incomplete rhizogenesis. The use of 2% chlorhexidine as an irrigating solution in association with Calcium Hydroxide could be an alternative. Methods: In the case of the patient, a 13-year-old boy, here presented, tooth 45 with apical periodontitis was treated with 2% Chlorhexidine solution as irrigant adjuvant to instrumentation, in association with Calcium Hydroxide used as a dressing for 14 days. After this period, the canal was cleaned with a physiological solution and under mandibular alveolar anesthesia, a # 70 K file was used slightly over the apex to cause bleeding. After observing that blood inside the canals had reached the cervical portion. White MTA was placed in the cervical portion of the canal. Results: Induced apexification and development of increasing root length and width could already be observed in the three-month control exam, and this continued until the last review in the one-year control exam. No color changes were observed in this follow-up period. Conclusions: Chlorhexidine and calcium hydroxide could be used as an alternative to pulp regeneration procedures (AU).

Assuntos

RESUMO

Introduction: The objective of this systematic review was to compare the apexification techniques of calcium hydroxide (Ca(OH)2), or mineral trioxide aggregate (MTA), with the pulp regeneration technique, using cohort studies, and non-randomized and randomized clinical trials. Methods: The methodology was based on electronic research in the following databases: PubMed, MEDLINE, Google Scholar, SciELO, and LILACS. In addition, a manual search was carried out using the references that were listed in the articles found. Results: A total of 403 potentially eligible studies were found, with seven being included in the inclusion criteria of this systematic review. The seven studies involved a total of 312 teeth. The minimum time of a follow-up period was 12 months. The irrigation solution most used was sodium hypochlorite, for both of the apexification and revascularization techniques. The medication commonly chosen in the apexification groups was Ca(OH)2, with antibiotic triple paste in the revascularization groups. The clinical rate of success in the groups treated with revascularization varied from 76% to 100%, while in the groups treated with apexification, it ranged from 68% to 100%. Only two studies reached a success rate equal to 100%. Conclusions: Variable levels of evidence were observed in relation to the treatments. However, it was confirmed that revascularization is an excellent option since its outcomes produced a greater gain of thickness and root length, besides developing a decrease in the apical foramen.

Introdução: O objetivo desta revisão sistemática foi comparar as técnicas de apexificação, com hidróxido de cálcio (Ca(OH)2) ou agregado trióxido mineral (MTA), com a técnica de regeneração pulpar, utilizando estudos coorte, ensaio clínico não randomizado e randomizado. Métodos: A metodologia foi baseada em pesquisa eletrônica nas seguintes bases de dados: PubMed, MEDLINE, Google Acadêmico, SciELO e LILACS. Além disso, foi realizada uma pesquisa manual utilizando as referências listadas nos artigos encontrados. Resultados: Foram encontrados 403 estudos potencialmente elegíveis, sendo sete incluídos nos critérios de inclusão desta revisão sistemática. Os sete estudos envolveram um total de 312 dentes. O tempo mínimo de um período de acompanhamento foi de 12 meses. A solução de irrigação mais utilizada foi o hipoclorito de sódio, para as técnicas de apexificação e revascularização. O medicamento comumente escolhido nos grupos de apexificação foi o Ca(OH)2, com pasta tripla antibiótica nos grupos de revascularização. A taxa clínica de sucesso nos grupos tratados com revascularização variou de 76% a 100%, enquanto nos grupos tratados com apexificação variou de 68% a 100%. Apenas dois estudos atingiram uma taxa de sucesso igual a 100%. Conclusões: Níveis variáveis de evidência foram observados em relação aos tratamentos. No entanto, confirmou-se que a revascularização é uma excelente opção, pois seus desfechos produzem maior ganho de espessura e comprimento radicular, além de diminuir o forame apical.

Assuntos

RESUMO

This study compares the clinical success rate and continued radiographic root development of apexification and regenerative endodontic procedure in traumatised immature permanent teeth, and proposes a method to evaluate apical convergence, namely apical angle. Clinical and radiological data were collected from 44 treated teeth (22 with apexification and 22 with regenerative endodontic procedure). The preoperative and follow-up periapical radiographs were analysed to calculate the percentage changes in root length, root width, apical diameter and apical angle. The success rates for complete healing with apexification and regenerative endodontic procedure were 86.36% and 95.45%, respectively. Radiographically, regenerative endodontic procedure showed significantly greater percentage changes in root width only (P < 0.05). Apexification and regenerative endodontic procedure provide satisfactory outcomes concerning clinical success rates. Continued root development in regenerative endodontic procedure was similar to apexification, except for root width. Apical angle allowed us to assess the convergence of the root canal walls.

Assuntos

RESUMO

Las piezas con necrosis pulpar y ápice abierto son un desafío de la práctica clínica endodóntica. Durante mucho tiempo estas piezas han sido tratadas con la técnica de apexificación con hidróxido de calcio. Esta técnica estimula la formación de una barrera calcificada a nivel apical, pero a partir de varias sesiones de tratamiento y los riesgos asociados que esto conlleva. Hoy en día, con el desarrollo de nuevas tecnologías, están a disposición materiales biocerámicos que permiten realizar el protocolo en una sola sesión. El Biodentine es un biocerámico con tiempo de fraguado corto y buena capacidad de sellado, que permite reducir los tiempos clínicos. El objetivo de este trabajo es presentar un caso clínico de una pieza dentaria diagnosticada con necrosis pulpar y con apicoformación incompleta, tratada con una técnica de apexificación con Biodentine en una sesión (AU)

Assuntos