RESUMO

This research pioneers the application of microwave irradiation as an innovative strategy for one-pot synthesis and surfactant elimination (cetyltrimethylammonium bromide-CTAB) from MCM-41, introducing a rapid and efficient methodology. MCM-41 silica is widely utilized in various applications due to its unique textural and structural properties. Nonetheless, the presence of residual surfactants after synthesis poses a challenge to its effective application. MCM-41 synthesis, conducted in a microwave reactor at 60 °C, provided a result within 0.5 to 1 h. Comprehensive analyses of structural, chemical, morphological, and surface characteristics were undertaken, with a focus on the impact of synthesis time on these properties. Surfactant extraction involved the use of ethanol as a solvent at 120 °C for 6 min within the microwave reactor. The acquired particles, coupled with the properties of textural and structural features, affirmed the efficacy of the synthesis process, resulting in the synthesis of MCM-41 within 36 min. This study presents the first instance of one-pot synthesis and surfactant removal from MCM-41 using a microwave reactor. The proposed method not only addresses the surfactant removal challenge, but also substantially accelerates the synthesis process, thereby enhancing the potential for MCM-41's application in diverse fields.

RESUMO

The development of nanomaterials has drawn considerable attention in nanomedicine to advance cancer diagnosis and treatment over the last decades. Gold nanorods (GNRs) and magnetic nanoparticles (MNPs) have been known as commonly used nanostructures in biomedical applications due to their attractive optical properties and superparamagnetic (SP) behaviors, respectively. In this study, we proposed a simple combination of plasmonic and SP properties into hybrid NPs of citrate-coated manganese ferrite (Ci-MnFe2O4) and cetyltrimethylammonium bromide-coated GNRs (CTAB-GNRs). In this regard, two different samples were prepared: the first was composed of Ci-MnFe2O4 (0.4 wt%), and the second contained hybrid NPs of Ci-MnFe2O4 (0.4 wt%) and CTAB-GNRs (0.04 wt%). Characterization measurements such as UV-Visible spectroscopy and transmission electron microscopy (TEM) revealed electrostatic interactions caused by the opposing surface charges of hybrid NPs, which resulted in the formation of small nanoclusters. The performance of the two samples was investigated using magneto-motive ultrasound imaging (MMUS). The sample containing Ci-MnFe2O4_CTAB-GNRs demonstrated a displacement nearly two-fold greater than just using Ci-MnFe2O4; therefore, enhancing MMUS image contrast. Furthermore, the preliminary potential of these hybrid NPs was also examined in magnetic hyperthermia (MH) and photoacoustic imaging (PAI) modalities. Lastly, these hybrid NPs demonstrated high stability and an absence of aggregation in water and phosphate buffer solution (PBS) medium. Thus, Ci-MnFe2O4_CTAB-GNRs hybrid NPs can be considered as a potential contrast agent in MMUS and PAI and a heat generator in MH.

RESUMO

Molecular markers are important tools in the characterization of plant genetic diversity and can provide support for conservation strategies for endangered populations. The different molecular techniques involve the evaluation of many individuals; therefore, it is crucial to have fast, efficient, and inexpensive methods for DNA extraction. Given the importance of the Aroeira (Myracrodruon urundeuva Fr. All.) it is pertinent to optimize a protocol that allows the obtainment of intact and pure DNA, aiming to assist conservation strategies for this species that is threatened with extinction. Thus, this study aimed to compare five DNA extraction methods: Dellaporta et al. (1983), Doyle and Doyle (1987) modified, Ferreira and Grattapaglia (1995), Romano and Brasileiro (2015), and Khanuja et al. (1999) and optimize the most efficient protocol for M. urundeuva. The modified DNA extraction protocol proposed by Doyle and Doyle (1987), using 100 mg of leaf tissue and 6 µl of ß-mercaptoethanol was the protocol that presented the sharpest bands after DNA electrophoresis and after the reactions of amplification employing Polymerase Chain Reaction (PCR). Therefore, it is suggested to use the protocol described by Doyle and Doyle (1987) modified for the extraction of DNA from young M. urundeuva leaves to carry out techniques involving molecular markers.

Assuntos

RESUMO

Our group works on the detection and characterization of cassava viruses, supporting projects that involve large scale pathogen surveillance activities and resistance screening assays in multiple and remote locations. In order to comply with these applications, nucleic acid isolation protocols need to be cost effective, adjusted for samples that will stand long distance transport and harsh storage conditions, while maximizing the yield and quality of the nucleic acid extracts obtained. The method we describe here has been widely used and validated using different downstream tests (including, but not limited to, Rolling Circle Amplification and Illumina and Nanopore sequencing), but is currently unpublished. The protocol begins with milligram amounts of dry leaf samples stored in silica gel, does not require liquid Nitrogen nor phenol extraction and produces an average of 2.11 µg of nucleic acids per mg of dry tissue.•DNA purity estimations reveal OD260/280 ratios above 2.0 and OD260/230 ratios above 1.7, even for samples stored in silica gel for several months.•The high quality of the extracts is suitable for detection of DNA and RNA viruses, with high efficiency.•We suggest this method could be used as part of a gold standard kit for virus detection in cassava.

RESUMO

An optimized high-quality DNA isolation protocol was developed using body segment tissue from the Fall Armyworm (Spodoptera frugiperda), that will allow documenting genetic variability based on biotypes, facilitating studies on the appearance, distribution and population dynamics of the fall armyworm at the molecular level. The resulting protocol is an easy-to-use, timesaving method that can rapidly achieve high quality, high-yielding total genomic DNA, using chemicals and everyday consumables available in a molecular laboratory. This new method of DNA extraction avoids the contamination of polysaccharides, salts, phenols, proteins and other cellular by-products that can interfere with subsequent reactions. DNA purity estimates reveal A260: A280 ratios greater than 1.9, which were evidenced by quality test on agarose gel, observing complete integrity and high purity of the resulting samples, and yielded 30-99 µg/g of total DNA. Therefore, the quality of the DNA produced from this extraction is suitable for subsequent molecular applications: (i) next generation whole genome sequencing, (ii) conventional polymerase chain reaction for genotyping, (iii) barcodes and (iv) gene cloning. In addition, to become an anticipating diagnostic tool for invasive lepidopteran larval stages:•The resulting protocol is an easy-to-use time-saving method.•This new extraction method prevents contamination from polysaccharides, salts, phenols, proteins, and other cellular sub-products.•DNA purity estimations reveal A260:A280 ratios above 1.9.

RESUMO

Manganese (Mn) is toxic at higher concentrations requiring its removal before returning the wastewater to the environment. This article reported the Mn removal of two fungi strains isolated from mine wastewater. ITS rRNA region sequencing identified the fungi strains as Cladosporium halotolerans and Hypocrea jecorina. Mn2+ removal assays were performed in Sabouraud broth with 50 mg L-1 Mn2+ supplemented and bioleaching assays using MnO2 instead of MnSO4 at the same conditions. C. halotolerans removed 96 % of 50 mg L-1 Mn2+ at two weeks without MnO2 bioleaching with 649.9 mg of biomass and H. jecorina removed about 50 % of Mn2+ in 21 days from initial 50 mg of Mn2+ L-1 with 316.8 mg of biomass. Extracellular laccases were present in C. halotolerans agar regardless of the Mn addition. Mn adsorbed was detected on C. halotolerans hyphae. Mn oxidation was positive to H. jecorina by reaction of its medium with Leucoberbelin blue.

RESUMO

Mosquitoes are the most important arthropods from the point of view of public health, due to the fact that they can transmit a large number of pathogens which can cause diseases to humans and animals. Aedes aegypti (L.) is one of the most important vector species in the world, since it can transmit numerous pathogens such as dengue, Zika, and chikungunya. Therefore, studies involving the molecular aspects of this and other mosquitoes species are currently increasing. In this report, we describe the comparison between two DNA extraction techniques, Chelex and cetyltrimethylammonium bromide (CTAB), for carrying out DNA extraction in larvae, pupae and adult female of Ae. aegypti. The Chelex technique was superior in the amount and purity of DNA as compared to the CTAB technique in the three life stages we tested.

RESUMO

The objective of this study was to test the efficiency of preservation and maceration methods for Euterpe precatoria leaflet tissue to obtain genomic DNA for molecular studies. The leaflets of E. precatoria were collected in an experimental field at Embrapa Acre, Brazil. The study was conducted in a completely randomized design with 10 replicates, in a 12 × 2 factorial structure, with 12 storage treatments (fresh; lyophiliser 3 days; refrigerator 3, 5, and 7 days; silica gel 7, 10, 20, and 30 days; and transport buffer 3, 5, and 7 days) and two leaf tissue maceration methods (liquid nitrogen and the TissueLyser®). Statistically significant differences in the obtained DNA concentration were found between the maceration and storage treatments. The TissueLyser® macerator produced higher DNA concentrations when compared to liquid nitrogen. For the storage treatments, five groups were formed based on DNA concentration when macerated with the TissueLyser® and two groups when macerated with liquid nitrogen. The DNA concentrations ranged from 285.00 ng/µ L (7 days in transport buffer) to 702.00 ng/µ L (30 days in silica gel) when the leaflets were macerated with liquid nitrogen, and from 572.73 ng/µ L (30 days in silica gel) to 2,850.00 ng/µ L (3 days in lyophiliser) using the TissueLyser® macerator. The DNA purity (A260/A280 nm) varied from 1.30 to 1.70 when the leaflets were macerated with liquid nitrogen and from 1.30 to 1.90 with the TissueLyser® macerator. Despite the variations in leaf tissue preservation and DNA concentration, all treatments were effective for DNA isolation and it was possible to amplify genomic regions of microsatellite markers by PCR. It was concluded that leaflets of E. precatoria stored in a lyophiliser and processed with an automatic macerator resulted in satisfactory DNA for molecular studies.

O objetivo deste estudo foi testar a eficiência de métodos de preservação e maceração de tecidos de folíolos de Euterpe precatoria para obter DNA genômico para estudos moleculares. Os folíolos de E. precatoria foram coletados no campo experimental da Embrapa Acre, Brasil. O estudo foi conduzido em delineamento inteiramente casualizado com 10 repetições, em esquema fatorial 12 × 2, com 12 tratamentos de armazenamento (fresco; liofilizado 3 dias; geladeira 3, 5, e 7; sílica gel 7, 10, 20 e 30 dias e tampão de transporte 3, 5 e 7 dias) e dois tipos de maceração do tecido foliar (nitrogênio líquido e TissueLyser®). Para a variável concentração de DNA houve diferença estatística entre os tipos maceração e de armazenamento. O macerador TissueLyser® apresentou maiores concentrações de DNA quando comparado ao nitrogênio líquido.Para os tipos de armazenamento verificou-se formação de cinco grupos quando macerados TissueLyser® e dois grupos quando macerados com nitrogênio líquido. As concentrações de DNA variaram de 285,00 ng/µ L (7 dias em tampão de transporte) a 702,00 ng/µ L (30 dias em sílica gel) quando maceradas com nitrogênio líquido. Quando maceradas com macerador TissueLyser® variaram de 572,73 ng/µ L (30 dias em sílica gel) a 2.850,00 ng/µ L (3 dias em liofilizador). A pureza do DNA (A260/A280 nm) variou de 1,30 a 1,70 quando os folíolos foram macerados com nitrogênio líquido e de 1,30 a 1,90 quando macerados em macerador TissueLyser®. Apesar das variações na conservação e concentração dos tecidos foliares, todos os tratamentos foram eficazes para o isolamento do DNA e amplificaram regiões de marcadores microssatélites. Concluiu-se que folíolos de E. precatoria armazenados em liofilizador e macerados com macerador automático resultaram em DNA satisfatório para estudos moleculares.

Assuntos

RESUMO

The strong UV absorption of the bromide in aqueous solution undergoes a remarkable red shift of more than 10 nm induced by the addition of the salts that constitute a saline buffer. The maximum absorption wavelength of the bromide is displaced from approximately 194 nm in ultrapure water to wavelengths above 200 nm, depending on the composition of the solution. The bromide spectrum as counterion of the cetyltrimethylammonium in the surfactant CTAB also shows sensitivity to the aggregation behavior of the tensioactive, being able to detect intermolecular interactions even at concentrations lower than the critical micelle concentration. And, when the micelles are assembled, the bromide absorption detects the interfacial rearrangements caused by the incorporation of ions. To know more about those interfacial features, the pyrene molecular probe was used, taking advantage of the extensive knowledge of its spectroscopy. Pyrene verifies the existence of changes in the interfacial organization which confirm that the sensitivity of the bromide spectrum is based on the ability of the ion to detect its microenvironment, and therefore reaffirms that its absorption spectrum can be used as a local sensor. The present work encourages the use of bromide as a sensor ion in the UV region between 190 and 210 nm, which would avoid the introduction of external molecular probes that could disturb the system.

RESUMO

Numerous applications have been described for microperoxidases (MPs) such as in photoreceptors, sensing, drugs, and hydrogen evolution. The last application was obtained by replacing Fe(III), the native central metal, by cobalt ion and inspired part of the present study. Here, the Fe(III) of MP-11 was replaced by Cu(II) that is also a stable redox state in aerated medium, and the structure and activity of both MPs were modulated by the interaction with the positively charged interfaces of lipids. Comparative spectroscopic characterization of Fe(III) and Cu(II)MP-11 in the studied media demonstrated the presence of high and low spin species with axial distortion. The association of the Fe(III)MP-11 with CTAB and Cu(II)MP-11 with DODAB affected the colloidal stability of the surfactants that was recovered by heating. This result is consistent with hydrophobic interactions of MPs with DODAB vesicles and CTAB micelles. The hydrophobic interactions decreased the heme accessibility to substrates and the Fe(III) MP-11catalytic efficiency. Cu(II)MP-11 challenged by peroxides exhibited a cyclic Cu(II)/Cu(I) interconversion mechanism that is suggestive of a mimetic Cu/ZnSOD (superoxide dismutase) activity against peroxides. Hydrogen peroxide-activated Cu(II)MP-11 converted Amplex Red® to dihydroresofurin. This study opens more possibilities for technological applications of MPs.

Assuntos