RESUMO

O objetivo do presente estudo foi identificar microrganismos das espécies Enterococcus spp e Enterobacteriaceae em dentes com canais radiculares infectados portadores de infecção primária e/ou secundária/persistente. Métodos: A amostra do presente estudo foi de 23 pacientes que apresentaram necessidade de tratamento ou retratamento endodôntico. Foram coletadas amostras de 28 dentes infectados usando pontas de papel absorventes estéreis, transportadas em solução salina, diluídas, plaqueadas e incubadas em estufa de cultura bacteriológica. Para o crescimento de microrganismos foram utilizados jarros com gerador de atmosfera de anaerobiose. Colônias microbianas foram isoladas, caracterizadas e identificadas. Os dados coletados foram estatisticamente analisados com a utilização do software SPSS for Windows 10.0 (SPSS Inc., USA). Resultados: Foi isolada somente uma cepa do gênero Enterococcus spp, e nenhuma espécie do gênero Enterobacteriaceae. Das coletas microbiológicas realizadas em 28 canais radiculares, todas apresentaram crescimento microbiano em anaerobiose. Dezoito dentes apresentavam necrose pulpar e lesão periapical. Os outros 10 dentes já haviam recebido tratamento endodôntico prévio e em 6 destes houve constatação de lesão periapical, sendo que nos outros 4, não. Conclusão: Nas condições experimentais do presente estudo, pode-se concluir que não houve correlação da presença de espécies microbianas das famílias Enterococcus spp e/ou Enterobacteriaceae com infecção primária ou secundária do canal radicular.

The objective of the present study was to identify microorganisms of the Enterococcus spp and Enterobacteriaceae species in teeth with infected root canals with primary and/or secondary/persistent infection. Methods: The sample of the present study consisted of 23 patients who required endodontic treatment or retreatment. Samples of 28 infected teeth were collected using sterile absorbent paper points, transported in saline solution, diluted, plated and incubated in a bacteriological culture oven. For the growth of microorganisms, jars with an anaerobic atmosphere generator were used. Microbial colonies were isolated, characterized and identified. The collected data were statistically analyzed using the SPSS for Windows 10.0 software (SPSS Inc., USA). Results: Only one strain of the genus Enterococcus spp was isolated, and no species of the genus Enterobacteriaceae. From the microbiological collections carried out in 28 root canals, all showed microbial growth in anaerobic conditions. Eighteen teeth had pulp necrosis and periapical lesion. The other 10 teeth had already received previous endodontic treatment and in 6 of them there was a periapical lesion, and in the other 4, no. Conclusion: Under the experimental conditions of the present study, it can be concluded that there was no correlation between the presence of microbial species of the Enterococcus spp and/or Enterobacteriaceae families with primary or secondary root canal infection.

Assuntos

RESUMO

Abstract Both root canal sealer-based and supplementary protocols may influence removal of filling material during endodontic retreatment. Mesial root canals of extracted mandibular molars were prepared using HyFlex EDM 25/.08, and filled with a calcium silicate sealer (Bio-C Sealer), or an epoxy resin (AH Plus), using the single cone technique (n = 12). Retreatment was performed using ProDesign Logic (PDL) RT and PDL 35/.05. The specimens were randomly divided into two experimental groups (n = 12), and the sealers were distributed similarly. A supplementary protocol was performed with PDL 50/.01 or XP-endo Finisher. Root canal transportation and volume, in addition to the remaining filling material percentage were evaluated using high-resolution (5 µm voxel size) micro-CT. Statistical analysis was performed using t-tests (α = 0.05). Root canals filled with AH Plus presented high residual filling material (p < 0.05). Both protocols decreased residual volume of filling material in the apical third (p < 0.05). PDL 50/.01 increased the apical root canal volume (p < 0.05). No difference was observed between the systems regarding canal transportation (p > 0.05). In conclusion, AH Plus is more difficult to remove from the apical third than Bio-C Sealer. PDL 50/.01 and XP-endo Finisher enabled greater removal of filling materials in the apical third, in the retreatment of curved root canals, without promoting apical transport.

RESUMO

Abstract This study aimed to identify and characterize the antimicrobial susceptibility profile of bacteria found in primary endodontic infections in the teeth of patients treated at the Dental Clinic of the University of Ribeirão Preto, São Paulo, Brazil. From September to December 2019, samples were obtained from 21 patients with primary endodontic infections. The collections were carried out in triplicate using paper cones placed close to the total length of the root canal. Bacterial isolation was performed in Brain Heart Infusion agar, Blood agar, and other selective culture media cultured at 37°C for up to 48 h under aerobiosis and microaerophilic conditions. The bacterial species were identified using the Vitek 2 automated system. The disk diffusion method on agar Müeller-Hinton was used to assess antimicrobial susceptibility with the recommended antimicrobials for each identified bacterial species. A total of 49 antibiotics were evaluated. Fifteen of the 21 samples collected showed bacterial growth, and 17 bacterial isolates were found. There were 10 different bacterial species identified: Enterococcus faecalis (four isolates), Streptococcus mitis/oralis (three isolates), Streptococcus anginosus (three isolates) being the most common, followed by Staphylococcus epidermidis, Enterococcus faecium, Streptococcus constellatus, Streptococcus alactolyticus, Enterobacter cloacae, Klebsiella variicola, and Providencia rettgeri (one isolate of each species). The analysis demonstrated significant susceptibility to most of the tested antibiotics. However, some Enterococcus isolates resisted the antibiotic's erythromycin, ciprofloxacin, and tetracycline. A Staphylococcus epidermidis isolate was characterized as multidrug-resistant. Five Streptococcus isolates were non-susceptible to all antibiotics tested.

RESUMO

Objective: This study evaluated different methods of calcium hydroxide (CH) removal from root canals with simulated internal resorptions using microcomputed tomography (micro-CT). Material and Methods: Sixty acrylic resin blocks with simulated root canals and internal resorptions were prepared using a Reciproc R25 file and then filled with CH. The blocks were divided into five test groups (n=12) according to the method used for CH removal: hand files (HF), Easy Clean (EC), passive ultrasonic irrigation (PUI), XP-Endo Finisher (XP), XP-Endo Finisher + PUI (XP+PUI). The blocks were scanned using a SkyScan 1172 scanner before and after CH removal to measure the volume and percentage of CH removal. The OriginPro 2017 software was used for statistical analyses. The level of significance was set at p<0.05 for all tests. Results: No method under study removed all CH. All methods had similar results in the cervical third (P>0.05). The percentage of CH removal was significantly greater in the area of internal resorption and along the total length of the canal in the XP+PUI group (P<0.05). The best results of CH removal were found in the apical third of roots in the XP+PUI and PUI groups (P>0.05). Conclusion: No method removed all CH from the root canals, but the combined XP+PUI method removed more CH than the other methods, especially from the area of the internal resorption(AU)

Objetivo: Este estudo avaliou diferentes métodos de remoção de hidróxido de cálcio (CH) de canais radiculares com reabsorções internas simuladas por meio de microtomografia computadorizada (micro-CT). Material e Métodos: Sessenta blocos de resina acrílica com canais radiculares simulados e reabsorções internas foram preparados com lima Reciproc R25 e posteriormente preenchidos com CH. Os blocos foram divididos em cinco grupos de teste (n=12) de acordo com o método utilizado para remoção de CH: limas manuais (HF), Easy Clean (EC), irrigação ultrassônica passiva (PUI), XP-Endo Finisher (XP), XP -Endo Finalizador + PUI (XP + PUI). Os blocos foram escaneados usando um scanner SkyScan 1172 antes e depois da remoção do CH para medir o volume e a porcentagem de remoção do CH. O software OriginPro 2017 foi utilizado para análises estatísticas. O nível de significância foi estabelecido em p<0,05 para todos os testes. Resultados: Nenhum método em estudo removeu todos o CH. Todos os métodos tiveram resultados semelhantes no terço cervical (P>0,05). A porcentagem de remoção de CH foi significativamente maior na área de reabsorção interna e ao longo do comprimento total do canal no grupo XP+PUI (P<0,05). Os melhores resultados de remoção de CH foram encontrados no terço apical das raízes nos grupos XP+PUI e PUI (P>0,05). Conclusão: Nenhum método removeu todo o CH dos canais radiculares, mas o método combinado XP+PUI removeu significativamente mais CH do que os outros métodos, especialmente da área de reabsorção interna (AU)

Assuntos

RESUMO

Abstract The aim of this study was to compare the filling capacity in curved root canal using a new continuous wave of condensation technique (Termo Pack II, Easy Dental Equipments, Brazil) or lateral compaction. The percentage of voids in the filling of mesial root canals of mandibular molars was assessed by micro-computed tomography (micro-CT). Mesial root canals (n=24) of mandibular molars with a degree of curvature between 20° and 40° were prepared using rotary system (ProDesign Logic, Easy, Brazil) up to #35, .05 taper. The root canals were filled by using the continuous wave of condensation system or lateral compaction and AH Plus sealer (n=12). Scanning at 9 µm was performed after preparation and after filling by using micro-CT SkyScan 1176. The volumetric percentage of filling material and voids (total length and in each root canal third) were calculated. Data were analyzed using ANOVA/ Tukey and Student's t tests (α=0.05). Before the filling techniques, the root canals volume after preparation was similar (p>0.05). The root canals filled by the continuous wave of condensation technique presented the lowest percentage of voids, and the greatest percentage of filling material in total length and thirds (cervical, middle and apical) (p<0.05). Both techniques were not able of completely filling the root canals. The continuous wave of condensation technique Termo Pack II promoted better root canal filling in curved root canals, when compared with lateral compaction.

Resumen El objetivo de este estudio fue comparar la capacidad de obturación en conductos radiculares curvos utilizando una nueva técnica de condensación de onda continua (Termo Pack II, Easy Dental Equipments, Brasil) vs compactación lateral. El porcentaje de brechas en la obturación de los conductos radiculares mesiales de los molares mandibulares se evaluó mediante microtomografía computarizada (micro-CT). Se prepararon conductos radiculares mesiales (n=24) de molares mandibulares con un grado de curvatura entre 20° y 40° utilizando un sistema rotatorio (ProDesign Logic, Easy, Brasil) al #35, conicidad 0,05. Los conductos radiculares se obturaron utilizando un sistema de condensación de onda contínua o compactación lateral y cemento AH Plus (n=12). Se realizó un escaneo de 9 µm después de la preparación y después de la obturación usando el micro-CT SkyScan 1176. Se calculó el porcentaje volumétrico de material de obturación y vacíos (longitud total y en cada tercio del conducto radicular). Los datos se analizaron utilizando las pruebas ANOVA/Tukey y t de Student (α=0,05). Antes de las técnicas de obturación, el volumen de los conductos radiculares después de la preparación fue similar (p>0,05). Los conductos radiculares obturados con la técnica de condensación por onda contínua presentaron el menor porcentaje de vacíos y el mayor porcentaje de material de obturación en longitud total y en tercios (cervical, medio y apical) (p<0,05). Ambas técnicas no fueron capaces de llenar completamente los conductos radiculares. La técnica de condensación de onda contínua Termo Pack II promovió un mejor relleno del conducto radicular en conductos radiculares curvos en comparación con la compactación lateral.

Assuntos

RESUMO

The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on evaluation of root canal preparation using rotary heat-treated nickel-titanium files. Curved mesial root canals of mandibular molars were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM) (n=12). The specimens were scanned using micro-CT with 5μm of voxel size before and after root canal preparation. Images with sub-resolution of 10 and 20μm voxel sizes were obtained. The percentage of volume increase, debris and uninstrumented root canal surface were analyzed in the different voxel sizes. Data were compared using unpaired Student's t-test and ANOVA statistical tests (α=0.05). No differences were observed for percentage of volume increase, debris and instrumented surface between the root canals prepared by PDL and HEDM (p>0.05). Both systems promoted higher percentage of debris in the apical third compared to the middle third (p0.05). PDL and HEDM had similar root canal preparation capacity. Micro-CT images using different voxel sizes did not influence the results of volume increase and debris evaluation. However, images at 5µm showed greater accuracy to evaluate the percentage of uninstrumented surfaces.

El objetivo de este estudio fue evaluar la influencia del tamaño de vóxel de la microtomografía computarizada (micro-CT) en la evaluación de la preparación del conducto radicular utilizando limas rotatorias de níquel-titanio tratadas térmicamente. Se prepararon conductos radiculares mesiales curvos de molares mandibulares usando ProDesign Logic 30/.05 (PDL) o HyFlex EDM 25/.08 (HEDM) (n=12). Las muestras se escanearon usando micro-CT con un tamaño de vóxel de 5μm antes y después de la preparación del conducto radicular. Se obtuvieron imágenes con subresolución de vóxeles de 10 y 20μm. Se analizó el porcentaje de aumento de volumen, residuos y superficie del conducto radicular no instrumentado en diferentes tamaños de vóxel. Los datos se compararon usando la prueba t de Student no pareada y las pruebas estadísticas ANOVA (α=0,05). No se observaron diferencias en el porcentaje de aumento de volumen, detritus y superficie instrumentada entre los conductos radiculares preparados por PDL y HEDM (p>0,05). Ambos sistemas promovieron un mayor porcentaje de detritos en el tercio apical en comparación con el tercio medio (p0,05). PDL y HEDM tenían una capacidad de preparación del conducto radicular similar. Las imágenes de micro-CT que utilizan diferentes tamaños de vóxel no influyeron en los resultados de la evaluación del volumen y los desechos. Sin embargo, las imágenes de 5µm mostraron una mayor precisión al evaluar el porcentaje de superficies no instrumentadas.

RESUMO

Purpose: This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT). Materials and Methods: In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications. In each image, the root canals of the lower premolars and molars were evaluated according to the Vertucci classification in On-Demand 3D software in the multiplanar reconstruction with dynamic navigation. Twenty-five percent of the images were re-assessed to analyze intraobserver confidence with the kappa test. Data were statistically evaluated with linear regression to evaluate the correlations of anatomic variations with age and sex, and the Wilcoxon test to analyze the laterality of variations, with a significance level of 5%. Results: The intraobserver agreement (0.94) was excellent. In general, the root canals of lower premolars and molars showed a higher prevalence of type I than other Vertucci classification types, followed by type V in premolars and type II in molars. When the molar roots were evaluated separately, type II was more frequent in mesial roots and type I in distal roots. Although age showed no correlations with the results, sex and laterality showed correlations with tooth 45 and the lower second premolars, respectively. Conclusion: The lower premolars and molars of a Brazilian sub-population showed a wide range of root canal anatomic variations.

RESUMO

Aim: The purpose of this study was to evaluate the efficacy to determine the root canal length, in vitro,of both the electronic apex locator (M2) and the autostop (AS - M3) functions of the Endus Duo Gnatus endodontic motor (Gnatus, São Paulo, SP, Brazil). Methods: Thirty extracted human single-rooted premolars had their root canal lengths (TLs) up to the apical foramen determined using the Endus Duo Gnatus in two ways: (1) In the stainless steel (SS) control group, the measurement was obtained using a stainless steel hand instrument with the electronic locator mode (M2 function) connected to a stainless-steel hand instrument (K-file #15). In the NiTi rotary instrument (NiTi RI) intervention group, the measurement was obtained during the instrumentation (M3 function) of the root canals with a nickel-titanium rotary instrument (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, USA), size 25/.06. The NiTi manually used instrument (NiTi MUI) Intervention group performed the measurement in locator mode using a Hyflex instrument, placed to true length manually. Statistical analysis was performed using ANOVA followed by the Tukey post-hoc test with a significance level of p < 0.05. Results: The true mean length and standard deviation (SD) of the standardized root canals were 18.40 ± 2.14mm, while the mean lengths and standard deviations (SD) were 18.29 ± 1.89mm, 18.22 ± 1.85mm, and 17.24 ± 2.09mm for the SS, NiTi RI, and NiTi MUI groups, respectively. However, data from the NiTi MUI Intervention group indicated shorter root canal lengths when compared to the SS control group and the NiTi RI Intervention group values, and were significantly shorter than the true canal length (p < 0.001). Conclusions:The use of the motor in NiTi RI Intervention group showed acceptable results. However, the NiTi MUI Intervention group resulted in unacceptable short measurements.

Objetivo: O objetivo deste estudo foi avaliar a eficácia na determinação do comprimento do canal radicular, in vitro, das funções localizador eletrônico foraminal (M2) e auto-parada durante a instrumentação (M3) do motor endodôntico Endus Duo Gnatus ( Gnatus, São Paulo, SP, Brasil). Métodos: Trinta pré-molares humanos uniradiculares extraídos tiveram seus comprimentos de canais radiculares (CRTs) até o forame apical determinados usando o Endus Duo Gnatus de duas maneiras: (1) No grupo controle de aço inoxidável (SS), a medida foi obtida usando um instrumento manual de aço inoxidável com modo de localização eletrônica foraminal (função M2) conectado a um instrumento manual de aço inoxidável (lima tipo K #15). No grupo intervenção instrumento rotatório NiTi (NiTi RI), a medida foi obtida durante a instrumentação (função M3) dos canais radiculares com instrumento rotatório de níquel-titânio (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, EUA), tamanho 25/.06. O grupo de intervenção NiTi instrumento usado manualmente (NiTi MUI) realizou a medição no modo localizador foraminal usando um instrumento Hyflex, colocado manualmente no comprimento real do dente. A análise estatística foi realizada por meio de ANOVA seguida do teste post-hoc de Tukey com nível de significância de p < 0,05. Resultados: Os comprimentos reais médios dos dentes e desvios-padrão (DP) dos canais radiculares padronizados foram 18,40 ± 2,14 mm, enquanto os comprimentos médios e desvios- padrão (DP) foram 18,29 ± 1,89 mm, 18,22 ± 1,85 mm e 17,24 ± 2,09 mm para os grupos SS, NiTi RI e NiTi MUI, respectivamente. No entanto, os dados do grupo de intervenção NiTi MUI indicaram comprimentos de canais radiculares mais curtos quando comparados aos valores do grupo controle SS e do grupo de intervenção NiTi RI, e foram significativamente mais curtos que o comprimento real do canal (p < 0,001). Conclusões: A utilização do motor no grupo Intervenção NiTi RI apresentou resultados aceitáveis. No entanto, o grupo de intervenção NiTi MUI resultou em medições curtas inaceitáveis.

Assuntos

RESUMO

ABSTRACT Objective: To evaluate the reliability and the accuracy of Tooth Coronal Index (TCI) and Pulp/Tooth Ratio (PTR) methods in dental age estimation using digital panoramic radiography. Material and Methods: In this cross-sectional study, 237 dental panoramic images were collected. The two methods (TCI and PTR) were applied to all left mandibular first and second molars based on inclusion and exclusion criteria. In order to analyze the acquired data, statistical methods were used. The estimated ages derived by exclusive formula were compared to the chronological age, and the error ranges for each indicator were measured to determine their accuracy. Results: There were negative correlations between PTR in the first molar (r=-0.89) and in the second molar (r=-0.788), as well as TCI in the first molar (r=-0.587) and in the second molar (r=-.242). In this study, we found that the Pulp/Tooth Ratio (PTR) accuracy rate for mandibular first and second molar teeth was 79.21% and 62.09 %, respectively, although the Tooth Coronal Index (TCI) value for these teeth was 34.45% and 5.85%. Conclusion: Pulp/Tooth Ratio and Tooth Coronal Index are potential age estimation indices. Although PTR was the more accurate one in our study. The results also demonstrated that indices related to the first molar tooth could be used to estimate age with greater accuracy and validity.

Assuntos

RESUMO

ABSTRACT Objective: To verify, through clinical and radiographic evaluations, the in vivo response of the dentin-pulpal complex of human primary teeth after pulpotomy with MTA and Biodentine™ in a follow-up period of 3, 6, and 12 months. Material and Methods: Thirty teeth were divided into MTA pulpotomy (n = 15) and Biodentine™ pulpotomy (n = 15) from children between 5 and 9 years of age, a randomized clinical trial with simple random sampling. The materials were inserted into the cavity after opening and removing the coronary pulp tissue. The cavity base consisted of glass ionomer cement and light-cured composite resin restoration. Clinical and radiographic analyses were performed after 3, 6, and 12 months. Statistical analysis by Fisher's exact test for dichotomous data at a 5% significance level was utilized. Results: Both materials caused color change after 12 months. However, MTA showed a higher percentage than Biodentine™ (p<0.0001). Pain was detected only with Biodentine™ at six months and mobility at 12 months (p=0.0013). Radiographically, after 12 months, periapical lesions, interradicular lesions, and internal resorption were evidenced in 13% of the cases for Biodentine™-treated teeth (p<0.0013). MTA induced pulp calcification in 13% of cases, unlike Biodentine™ (p<0.0013). Conclusion: BiodentineTM and MTA are suitable for clinical use in pulpotomy treatment, yet both materials lead to tooth discoloration.

Assuntos