RESUMO

Abstract This study assessed the reliability of a color measurement method using images obtained from a charge-coupled device (CCD) camera and a stereoscopic loupe. Disc-shaped specimens were created using the composite Filtek Z350 XT (shades DA1, DA2, DA3, and DA4) (n = 3). CIELAB color coordinates of the specimens were measured using the spectrophotometer SP60 over white and black backgrounds. Images of the same specimens were taken using a CCD camera attached to a stereoscopic loupe. The color of the image was measured (red-green-blue [RGB]) using an image processing software and converted to CIELAB coordinates. For each color coordinate, data from images were adjusted using linear regressions predicting those values from SP60. The whiteness index for dentistry (WID) and translucency parameter (TP00) of the specimens as well as the color differences (ΔE00) among pairwise shades were calculated. Data were analyzed via repeated-measures analysis of variance and Tukey's post hoc test (α = 0.05). Images obtained using the loupe tended to be darker and redder than the actual color. Data adjustment resulted in similar WID, ΔE00, and TP00 values to those observed for the spectrophotometer. Differences were observed only for the WID of shade DA3 and ΔE00 for comparing DA1 and DA3 over the black background. However, these differences were not clinically relevant. The use of adjusted data from images taken using a stereoscopic loupe is considered a feasible method for color measurement.

RESUMO

Introdução:A estética do sorriso é um aspecto valorizado pela sociedade atual, o que demanda que os profissionais de odontologia estejam atualizados sobre materiais dentários e novas técnicas para alcançar resultados estéticos restauradores de alta qualidade. A resina composta é frequentemente utilizada para simplificar a reabilitação oral, pois oferece facetas dentárias que combinam excelente estética e durabilidade. Objetivo:Este artigo tem como objetivo relatar um caso clínico de reabilitação estética utilizando facetas em resina composta com fechamento de diastemas.Relato de caso:Uma paciente do sexo feminino, com 24 anos de idade, procurou a clínica escola de odontologia com insatisfação em relação à estética do seu sorriso. A pacienteapresentava diastemas, restauração defeituosa e desproporção no tamanho dos dentes anteriores. O tratamento consistiu em um clareamento caseiro prévio, seguido pela confecção de facetas diretas em resina composta para fechamento dos diastemas e correção da desproporção dentária. Foram utilizados um Jig Estético e o software Digital Smile Design (DSD)para o planejamento, além de um mock-up em resina bisacrílica. Após a confecção das facetas, foi obtido um resultado estético final satisfatório. O caso incluiu um total de oito facetas,dos dentes 14 ao 24. Conclusão:O tratamento utilizando restaurações em resina composta proporcionou à paciente uma reabilitação estética, funcional e biológica (AU).

Introduction:Smile aesthetics is an aspect valued by today's society, which demands that dental professionals are up to date on dental materials and new techniques to achieve high-quality restorative aesthetic results. Composite resin is often used to simplify oral rehabilitation, as it offers dental veneers which combine excellent aesthetics and durability. Objective:This article aims to report a clinical case of aesthetic rehabilitation using composite resin veneers with diastema closure. Case report:A24-year-old female patient came to the dental school clinic with dissatisfaction regarding the aesthetics of her smile. The patient had diastemas, defective restoration and disproportionate anterior teeth size. The treatment consisted of prior at-home tooth bleaching, followed by creating direct composite resin veneers to close the diastemas and correct tooth disproportion. An Aesthetic Jig and the Digital Smile Design (DSD) software program were used for planning, in addition to a mock-up in bisacrylic resin. After treatment, a satisfactory final aesthetic result was obtained. The case included a total of eight veneers, from teeth 14 to 24. Conclusion:Treatment using composite resin restorations provided the patient with aesthetic, functional and biological rehabilitation (AU).

Introducción: La estética de la sonrisa es un aspecto valorado por la sociedad actual, hecho que demanda de los profesionales de odontología actualización constante sobre los materiales dentarios y nuevas técnicas para alcanzar resultados estéticos restauradores de altacualidad. La resina compuesta es frecuentemente utilizada para simplificar la rehabilitación oral, pues ofrece facetas dentarias que combinan excelente estética y durabilidad.Objetivo: Este artículo tiene como objetivo relatar un caso clínico de rehabilitación estética a partir de la utilización de facetas en resina compuesta con cierre de diastemas. Informe de caso: Una paciente, del sexo femenino, con 24 años de edad, buscó la clínica-escuela de odontología insatisfecha con la estética de su sonrisa. La paciente presentaba diastemas, restauración dentaria defectuosa y desproporción en el tamaño de los dientes anteriores. El tratamiento consistió en un blanqueamiento casero previo, seguido por la confección de facetas directas de resina compuesta para cierre de los diastemas y corrección de la desproporción dentaria. Fueron utilizados un Jig Estético y el software Digital Smile Design(DSD) para el planeamiento, además de un mock-upen resina bisacrílica. Tras la confección de las facetas, fue obtenido un resultado estético final satisfactorio. El caso incluyó un total de ocho facetas, de los dientes 14 al 24.Conclusión: El tratamiento a partir de restauraciones en resina compuesta proporcionó a la paciente una rehabilitación estética, funcional y biológica (AU).

Assuntos

RESUMO

La tecnología CAD/CAM es una forma innovadora relacionada con la implementación de técnicas digitales para mejorar las restauraciones prostéticas en un paciente, entre ellas, las destinadas a la estética dental. El presente estudio tiene el objetivo de describir la utilidad de la tecnología CAD/CAM en la fabricación de prótesis dentales. Para ello se realizó una revisión de la literatura médica disponible en las bases de datos PubMed/Medline, Scopus y SciELO, mediante fórmulas de búsqueda avanzada; se seleccionaron artículos en idioma español e inglés. En la actualidad, con esta tecnología se ha logrado combinar estética, resistencia y precisión en la restauración directa, además de garantizarse una mayor duración y años de funcionalidad para cada una de las prótesis, coronas e implantes. La calidad de vida y satisfacción referidas por los pacientes portadores de piezas producidas con esta tecnología, es superior a las manifestadas por aquellos tratados con piezas de fabricación tradicional. El uso de técnicas de inteligencia artificial y biomateriales representará un cambio cualitativo y cuantitativo en el uso de los sistemas CAD/CAM.

CAD/CAM technology is an innovative way related to the implementation of digital techniques to improve prosthetic restorations in a patient, including those intended for dental aesthetics. The objective of this study is to describe the usefulness of CAD/CAM technology in the dental prostheses manufacture. A review of the medical literature available in the PubMed/Medline, Scopus and SciELO databases was carried out, using advanced search formulas; Articles in Spanish and English were selected. Currently, with this technology it has been possible to combine aesthetics, resistance and precision in direct restoration, in addition to guaranteeing greater duration and years of functionality for each of the prostheses, crowns and implants. The quality of life and satisfaction reported by patients wearing parts produced with this technology is higher than those reported by those treated with traditionally manufactured parts. The use of artificial intelligence and biomaterials techniques will represent a qualitative and quantitative change in the use of CAD/CAM systems.

RESUMO

La transposición es el intercambio de la posición de dos dientes adyacentes durante los primeros años de la dentición mixta. El objetivo de la investigación fue evaluar los cambios clínicos de un caso con transposición parcial bilateral de incisivos laterales mandibulares. Se atendió una paciente de 8 años de edad, femenina, de raza blanca, síndrome de Clase II división 1, con transposición de los incisivos laterales con caninos inferiores. Fue tratada con un arco lingual de cierre horizontal, de alambre 0,032 y dos muelles de NiTi comprimidos desde el cierre horizontal del arco hasta una armella soldada a la banda que se colocó en ambos incisivos laterales. Se recuperó el espacio necesario para la erupción de los caninos inferiores y así mejoró la estética dental y facial de la paciente.

Transposition is the exchange of the position of two adjacent teeth during the first years of the mixed dentition. The objective of this research is to evaluate the clinical changes of a case with partial bilateral transposition of mandibular lateral incisors. We present an 8-year-old white female patient with Class II Division 1 malocclusion and transposition of the lateral incisors with lower canines. She was treated with a 0.032 wire horizontal closure lingual arch and two NiTi springs compressed from the horizontal closure of the arch to an eyebolt welded to the band that was placed on both lateral incisors. The necessary space for the eruption of the lower canines was recovered, thus improving her dental and facial aesthetics.

Assuntos

RESUMO

Objectives: This study aimed to evaluate the surrounding and underlying shades' effect on the color adjustment potential (CAP) of a single-shade composite used in a thin layer. Materials and Methods: Cylinder specimens (1.0 mm thick) were built with the Vittra APS Unique composite, surrounded (dual specimens) or not (simple specimens) by a control composite (shade A1, A2, or A3). Simple specimens were also built only with the control composites. Each specimen's color was measured against white and black backgrounds or the simple control specimens with a spectrophotometer (CIELAB system). The whiteness index for dentistry (WID) and translucency parameters (TP00) were calculated for simple specimens. Differences (ΔE00) in color between the simple/dual specimens and the controls were calculated. The CAP was calculated based on the ratios between data from simple and dual specimens. Results: The Vittra APS Unique composite showed higher WID and TP00 values than the controls. The highest values of ΔE00 were observed among simple specimens. The color measurements of Vittra APS Unique (simple or dual) against the control specimens presented the lowest color differences. Only surrounding the single-shade composite with a shaded composite barely impacted the ΔE00. The highest CAP values were obtained using a shaded composite under simple or dual specimens. Conclusions: The CAP of Vittra APS Unique was strongly affected by the underlying shade, while surrounding this composite with a shaded one barely affected its color adjustment.

RESUMO

OBJECTIVES: Natural restorations combine digital workflow and shell technique to create CAD/CAM restorations with the form and texture of natural teeth. This case report describes an interdisciplinary digital workflow combined with CAD/CAM natural restorations to achieve the naturalness of an anterior rehabilitation. CLINICAL CONSIDERATIONS: A 38-year-old patient attended to the office with esthetic issues. An interdisciplinary treatment plan was conducted, which included periodontal surgery to recreate the gingival contour, associated with bleaching and manufacturing CAD/CAM ceramic veneers to return an optimal teeth surface texture and shape. CONCLUSIONS: The design and manufacturing of CAD/CAM natural restorations using a digital workflow allowed a predictable result and overcame the limitations of conventional shell technique. CLINICAL SIGNIFICANCE: Conventional shell technique is used to create restorations with the form and texture of natural teeth. This article presents a combination of the conventional shell technique with a digital workflow, facilitating the design and manufacturing of CAD/CAM natural restorations.

Assuntos

RESUMO

INTRODUCTION: Gingival recession (GR) is a relevant clinical condition due to its high prevalence worldwide, which leads to aesthetic demands and dentin hypersensitivity. Collagen matrices have been associated with different designs of coronally advanced flaps (CAFs) to treat GR defects. However, the literature lacks long-term follow-up of this treatment option. The aim of this study is to present the long-term follow-up (up to 7 years) of two GR defects (associated or not with noncarious cervical lesion) treated with a CAF and a collagen matrix (CM). CASE PRESENTATION: Case 1 underwent a CAF associated with a CM to treat a single GR defect. After 7 years, Case 1 presented with 3 mm of recession reduction, which corresponds with the 85.7% of root coverage. Case 2 presented two GR defects associated with noncarious cervical lesions (NCCLs). The NCCLs were partially restored with resin composite and then underwent a modified CAF for multiple defects and a CM. After 5 years of follow-up, Case 2 presented with 1.5 and 2.5 mm of recession reduction, which corresponds with the average 83.3% defect coverage. CONCLUSION: These two cases may show that CMs can provide long-term stable outcomes in the treatment of GR defects. Why is this case new information? One of the cases is the first one to describe a 7 years of follow-up after CAF+CM to treat gingival recession defects. What are the keys to successful management of this case? Correct material handling. Adequate restorative protocol and surgical technique. What are the primary limitations to success in this case? Diagnose Patient compliance.

Assuntos

RESUMO

Aim: To determine the prevalence of dental development anomalies and type of influence on the smile of adolescent students. Method: This was a cross-sectional and analytical study carried out in two public (A1) and two private (A2) schools chosen by lot in the city of Parnaíba-Piauí. The sample calculation was based on the target population: number of people enrolled in public and private schools between 15 and 19 years, in the city of Parnaíba-PI, which totaled 6209 students in 2020, according to a survey carried out by the Brazilian Institute of Geography and Statistics ­ IBGE. A questionnaire on epidemiological data and aesthetic self-perception of the smile was applied to 160 adolescents between 15 and 19 years old, from August 2020 to July 2021. The clinical examination was carried out under natural light, to check for the presence of anomaly(s) in the dental development. Students who presented only one pathology would be called group 1 (G1), those who presented two would be called group 2 (G2) and those who presented 3 or more would be called group 3 (G3). On the other hand, adolescents in whom no anomaly was evidenced would participate in the control group (CG), both in A1 and A2. Results: It was observed that 37.5% of the sample had only a type of dental anomaly, corresponding to 60 individuals. The most prevalent were enamel hypoplasia, fusion, transposition, agenesis, ectopic eruption, microdent and dens-in-dent. It was possible to verify a higher prevalence in the maxilla, private schools (76.6%) and females (86.6%). In 45% of adolescents with dental anomalies, embarrassment was observed when smiling. Conclusion: The prevalence was relatively high, highlighting the enamel hypoplasia, influencing the smile esthetics of a reasonable number of adolescents, whether for acquaintances, strangers or even for photographs

Assuntos

RESUMO

ABSTRACT The CAD/CAM technology arose from the need to develop materials with better mechanical and optical properties that could be used for making monolithic restorations. Several materials have been used for milling indirect restorations in prefabricated blocks. Among them, lithium silicate reinforced with zirconia. Due to its recent introduction in the market, this case report aimed to present a detailed clinical protocol for the execution of a ceramic onlay of this material using CAD/CAM technology. A 57-year-old female patient sought care with extensive restoration in composite resin (BOMD) of tooth 15 maintained for almost two years. However, due to bruxism, constant dental tightening, the extension of the direct restoration and the need for improved esthetics, it was proposed to replace it with an indirect ceramic onlay restoration. Prophylaxis and choice of the color of the patient's dental substrate were performed. Afterwards, the dental preparation was made and polished. Subsequently, the molding was made with addition silicone and the provisional restoration confectioned. Once the stone model was obtained, it was scanned and the ceramic onlay restoration was milled using CAD/CAM technology. Finally, the restoration was stained and cemented over the preparation. After 2 years, the restoration remained stable, with no evidence of color mismatch, marginal discoloration, marginal cleft, caries or fracture, proving the effectiveness of the treatment in this time interval. The correct indication of the ceramic material combined with the use of CAD/CAM technology facilitated the restorative process, restoring function and the esthetics desired by the patient.

RESUMO A tecnologia CAD/CAM surgiu da necessidade de desenvolvimento de materiais com melhores propriedades mecânicas e ópticas que pudessem ser utilizados para confecção de restaurações monolíticas. Diversos materiais têm sido utilizados para fresagem de restaurações indiretas em blocos pré-fabricados. Dentre eles, o silicato de lítio reforçado com zircônia. Devido a sua recente introdução no mercado, este relato de caso objetivou apresentar um protocolo clínico detalhado para a execução de uma onlay cerâmica desse material utilizando a tecnologia CAD/CAM. Paciente, 57 anos, sexo feminino, procurou atendimento com extensa restauração em resina composta envolvendo as faces (MODV) do dente 15 mantida por quase dois anos. Contudo, em virtude do bruxismo, do apertamento dental constante, da extensão da restauração direta e da necessidade de melhora na estética, foi proposto a substituição por uma restauração indireta em cerâmica do tipo onlay. Foi realizada a profilaxia e escolha da cor do substrato dental da paciente. Em seguida o preparo dental foi confeccionado e polido. Posteriormente foi feita a moldagem com silicone de adição e a confecção do provisório. Com a obtenção do modelo, este foi escaneado e fresada a onlay cerâmica pela tecnologia CAD/CAM, que posteriormente foi maquiada e cimentada sobre o preparo. Após 2 anos, a restauração permaneceu estável, sem evidência de incompatibilidade de cor, descoloração marginal, fenda marginal, cárie ou fratura, comprovando a eficácia do tratamento neste intervalo de tempo. A correta indicação do material cerâmico aliada ao uso da tecnologia CAD-CAM facilitou o processo restaurador devolvendo função e a estética desejada pela paciente.

RESUMO

Aim: To evaluate the prevalence and factors associated with gummy smiles in adolescents aged between 15 and 18 years attending high school. Methods: The cross-sectional and quantitative study was carried out during the Covid-19 pandemic, with 160 adolescents, from two public (A1) and two private (A2) schools chosen by lottery, divided into two groups: G1 (with gummy smile) and G2 (no gummy smile). A clinical examination was carried out on the adolescents, investigating the presence or absence of a gummy smile (GS), by analyzing the variables (interlabial distance at rest, upper incisor exposure at rest, smile arc, measurement from the subnasal to the upper lip philtrum, upper lip length, upper lip thickness, hypermobility and lower/middle third ratio). Means and dispersion were obtained, and the Chi-square association test was applied, to compare the results between A1 and A2 and between G1 and G2. Results: The prevalence of GS was 33.8% (=54). It was found that no statistically significant associations were found (p > 0.05), regarding the type of school and gender with the presence of GS in adolescents. There was no statistically significant difference (χ² = 1.82; p = 0.07) between the groups and the age of adolescents. There was a significant association between the studied variables and GS (p < 0.05). Conclusion: The prevalence was high with a predominance of females. There were no statistically significant associations regarding the type of school and gender, but there was a significant association between gummy smile and lip dimensions

Assuntos