RESUMO

The standard techniques for monitoring beach litter focus on the litter that is accumulated on beaches. Therefore, the underwater bathing area is usually overlooked. Our study aims to start the discussion about the litter in the bathing area, an important connection between the exposed beach and the ocean. We aimed to compare sampling methodologies between the underwater bathing area and the exposed beach. We highlighted litter's similarities and differences regarding the amount, material, possible sources, and interaction with the biota. We also performed a brand audit on the underwater bathing area litter. In the underwater region, 106 items were collected while 1706 items were collected from the exposed beach region. Plastic was the dominant type of material in both sites, exposed beach (89.92 %) and bathing area (83.96 %). The litter's possible source was different. In the underwater bathing area was more related to food packages (couscous, rice). On the other hand, litter on the exposed beach was associated with beach use (single-use plastic such as plastic cups). The brand audit identified 21 companies, whereby most brands were Brazilian and food-related. Regarding interactions with the biota, the litter in the bathing area had more bio-fouling (87.73 %) than the litter collected on the exposed beach (10.00 %). Information about bathing area litter can be useful to draw different management strategies. Due to the differences in litter types and behavior between the two sites, the same mitigation strategies might not be equally efficient.

Assuntos

RESUMO

Problem: Earthworm is a valuable source of biologically and pharmacologically active compounds, with applications in the treatment of various types of diseases; however, the main application they have been given is in the production of organic fertilizer. One of the alternatives for obtaining bioactive compounds is by means of enzymatic hydrolysis. Aim: This study proposes the optimization of the fractionation of the antioxidant enzymatic hydrolysate from Californian red worm (Eisenia fetida) protein. Methodology: For this purpose, the worms were separated and hydrolyzed using the enzyme Alcalase 2.4L for 4000s. The obtained hydrolysate was fractionated by means of a crossflow tangential ultrafiltration system, with a 3 kDa molecular weight cut-off ceramic membrane. A response surface design of the composite central factorial type was implemented to evaluate the effect of pH, transmembrane pressure, and flow factors on the response variables transmission, volume reduction factor (VRF) and permeate flow resistance. The transmissions focused on the antioxidant peptides, measured by three conventional methods such as TEAC, FRAP, ORAC, also known as TTEAC, TFRAP and TORAC, respectively. The evaluated resistances were the total resistance (Rtotal), fouling resistance (Rfouling), and gel resistance (Rgel). Result: The results showed that the three factors evaluated affect all the response variables either in their linear or quadratic terms or by some interaction. For each response variable, a mathematical model was obtained, with statistical significance and a non-significant lack of adjustment. The models obtained were used for a multi-objective optimization process in which transfers were maximized, and resistances were minimized. The efficiency of the optimum ultrafiltration process was 25 %. Conclusion: The neutral-alkaline pH is ideal for the ultrafiltration process of bioactive peptides, as it is where the highest transmissions of peptides with antioxidative capacity are found. Under optimal conditions, the 3 kDa membrane permeate was found to exhibit higher antioxidant capacity than the retentate and feed. Based on this, the fraction of less than 3 kDa emerges as a potential multifunctional ingredient, thanks to its antioxidant properties.

RESUMO

Characterizing seasonal changes in diatom community profiles in coastal environments is scarce worldwide. Despite diatoms being prevalent in microfouling, their role in microbially influenced corrosion of metallic materials remains poorly understood. This study reports the effect of seasonal variations on the settlement of marine diatoms and corrosion of 316 L stainless steel surfaces exposed to Chilean coastal seawater. Electron microscopy imaging revealed a diverse assembly of diatoms, exhibiting pronounced differences at genus level between summer and winter seasons, with a significant delay in diatom settlement during winter. Electrochemical measurements indicated an active role of diatoms in increasing corrosion current during biofilm development. While the final diatom composition was similar irrespective of the season, the analyses of diatom assemblages over time differed, showing faster colonization when silicate and nitrate were available. This study lays the foundation for future research on the dominant season-specific genera of diatoms to unveil the microbial interactions that could contribute to corrosion and to evaluate their potential as bioindicators for alternative surveillance strategies.

Assuntos

RESUMO

In the global race to produce green hydrogen, wastewater-to-H2 is a sustainable alternative that remains unexploited. Efficient technologies for wastewater-to-H2 are still in their developmental stages, and urgent process intensification is required. In our study, a mechanistic model was developed to characterize hydrogen production in an AnMBR treating high-strength wastewater (COD > 1000 mg/L). Two aspects differentiate our model from existing literature: First, the model input is a multi-substrate wastewater that includes fractions of proteins, carbohydrates, and lipids. Second, the model integrates the ADM1 model with physical/biochemical processes that affect membrane performance (e.g., membrane fouling). The model includes mass balances of 27 variables in a transient state, where metabolites, extracellular polymeric substances, soluble microbial products, and surface membrane density were included. Model results showed the hydrogen production rate was higher when treating amino acids and sugar-rich influents, which is strongly related to higher EPS generation during the digestion of these metabolites. The highest H2 production rate for amino acid-rich influents was 6.1 LH2/L-d; for sugar-rich influents was 5.9 LH2/L-d; and for lipid-rich influents was 0.7 LH2/L-d. Modeled membrane fouling and backwashing cycles showed extreme behaviors for amino- and fatty-acid-rich substrates. Our model helps to identify operational constraints for H2 production in AnMBRs, providing a valuable tool for the design of fermentative/anaerobic MBR systems toward energy recovery.

RESUMO

Maritime transport is considered a sustainable mean of transporting goods worldwide. In addition to cargo, ships unintentionally transport non-native species. While managing the transport of organisms through ballast water has been at the centre of international efforts, biofouling from ships has not been addressed in the same way and some potentially harmful practices, such as in-water cleaning, still occur worldwide. Another problem arising from ship operating standards is the equipment known as "open-loop scrubbers," which utilizes seawater to "wash" the sulfur content out of the heavy fuel oil (HFO) and, in turn, discharges an acidic wash water full of sulfur and other substances from fuel oils in the environment. Here, we compare the international regulations applied to both issues and how they have been implemented in Brazil so far, considering the perspective of ports and terminals. Results showed that six of sixteen states have already imposed restrictions/bans on scrubbers wash waters, indicating a clear movement in the direction of restricting the discharge as the best way to prevent air and marine pollution. Regarding biofouling, although there is hope with the adoption of the revised guidelines, there are still some doubts considering these are non-binding, depending on national policies to be implemented. In Brazil, there is no national policy yet, and all public ports prohibit vessels in-water cleaning.

Assuntos

RESUMO

Bryozoans are commonly associated with various artificial structures in marine environments and have been responsible for several bioinvasion events worldwide. Understanding the interactions between bryozoans and artificial structures is therefore essential to prevent the establishment and spread of potential bioinvaders. This study investigated bryozoan recruitment on four different substrates (PET, nautical ropes, metal, and PVC) placed in three orientations (vertical, horizontal facing down and facing up) in an area of the Western Atlantic. In total, 15 species of bryozoans were found. The results revealed significant variations in assemblages' richness, with bryozoans showing a preference for settling on PVC (14 species found) and on the underside of horizontal substrates (15 species found), resulting in the higher representativity observed in this study. Cryptogenic (nine species) and exotic (five species) bryozoans dominated the assemblages in all treatments, indicating that the type of substrate (especially artificial) and its orientation can favor the settlement of bryozoans, particularly non-native species. Therefore, the availability of multiple types of artificial substrates in marine environments should be treated as a cause for concern.

Assuntos

RESUMO

Laurencia seaweed species synthesize a broad range of secondary metabolites, mainly terpenes (e.g., elatol), exhibiting diverse ecological roles, such as defense against fouling and herbivores. Recently, an intricate cellular machinery was described concerning terpenes biosynthetic pathways, storage inside corps en cerise (CC), and regulated exocytosis in these species. But for seaweeds in general, the proteins involved in transmembrane transport of secondary metabolites remain unknown. Assays with Rhodamine-123 and cyclosporine A (CSA) revealed the presence of ABC transporters in CC membrane of Laurencia dendroidea. In vivo incubation assays with CSA resulted in CC morphological changes, reduced intracellular elatol concentrations, and increased biofouling cover on the seaweed surface. Cultivation assays in the presence of a marine pathogenic bacteria induced the expression of ABC proteins belonging to the subfamilies ABCB, ABCD, ABCF, and ABCG. The latter subfamily is known to be associated with the transport of plant terpenes. Our results shed new light on the role of ABC proteins in key mechanisms of the defensive system in seaweeds against fouling and herbivory.

Assuntos

RESUMO

This paper aimed to analyze the reduction in the ballast layer permeability simulated in a laboratory in saturated conditions by the presence of rock dust as a contaminant of three types of rocks explored in different deposits in the northern region of the state of Rio de Janeiro, Brazil, through laboratory testing relating the physical properties of rock particles before and after sodium sulfate attack. Sodium sulfate attack is justified by the proximity of some sections of the planned EF-118 Vitória-Rio railway line to the coast and of the sulfated water table to the ballast bed, which could degrade the material used and compromise the railway track. Granulometry and permeability tests were performed to compare ballast samples with fouling rates of 0, 10, 20, and 40% rock dust by volume. A constant head permeameter was used to analyze hydraulic conductivity and establish correlations between the petrography and mercury intrusion porosimetry of the rocks, namely two types of metagranite (Mg1 and Mg3) and a gneisse (Gn2). Rocks, such as Mg1 and Mg3, with a larger composition of minerals susceptible to weathering according to petrography analyses, tend to be more sensitive to weathering tests. This, in conjunction with the climate in the region studied, with average annual temperature and rainfall of 27 °C and 1200 mm, could compromise track safety and user comfort. Additionally, the Mg1 and Mg3 samples showed greater percentage variation in wear after the Micro-Deval test, which could damage the ballast due to the considerable changeability of the material. The mass loss caused by abrasion due to the passage of rail vehicles was assessed by the Micro-Deval test, with Mg3 (intact rock) declining from 8.50 ± 1.5 to 11.04 ± 0.5% after chemical attack. However, Gn2, which exhibited the greatest mass loss among the samples, showed no significant variation in average wear, and its mineralogical characteristics remained almost unchanged after 60 sodium sulfate cycles. These aspects, combined with its satisfactory hydraulic conductivity rate, indicate that Gn2 is suitable for use as railway ballast in the EF-118 railway line.

RESUMO

One of the most broadly used models for membrane fouling is the Hermia model (HM), which separates this phenomenon into four blocking mechanisms, each with an associated parameter n. The original model is given by an Ordinary Differential Equation (ODE) dependent on n. This ODE is solved only for these four values of n, which limits the effectiveness of the model when adjusted to experimental data. This paper aims extend the original Hermia model to new values of n by slightly increasing the complexity of the HM while keeping it as simple as possible. The extended Hermia model (EHM) is given by a power law for any n ≠ 2 and by an exponential function at n = 2. Analytical expressions for the fouling layer thickness and the accumulated volume are also obtained. To better test the model, we perform model fitting of the EHM and compare its performance to the original four pore-blocking mechanisms in six micro- and ultrafiltration examples. In all examples, the EHM performs consistently better than the four original pore-blocking mechanisms. Changes in the blocking mechanisms concerning transmembrane pressure (TMP), crossflow rate (CFR), crossflow velocity (CFV), membrane composition, and pretreatments are also discussed.

RESUMO

The performance of an electrochemically assisted anoxic-oxic membrane bioreactor (A/O-eMBR) was assessed as an alternative for azo dye (Remazol Brilhant Violet (RBV)) removal from simulated textile wastewater. The A/O-eMBR was operated under three experimental conditions (runs I, II, and III), in which different solids retention time (SRT) (45 and 20 d) and exposure mode to electric current (6'ON/30'OFF and 6'ON/12'OFF) were assessed. The reactor exhibited excellent decolorization performance for all runs, with average dye removal efficiency ranging from 94.3 to 98.2%. Activity batch assays showed that the dye removal rate (DRR) decreased from 16.8 to 10.2 mg RBV L-1 h-1 when the SRT was reduced from 45 to 20 d, likely attributed to the lower biomass content under lower sludge age. At the electric current exposure mode of 6' ON/12'OFF, a more substantial decrease of DRR to 1.5 mg RBV L-1 h-1 was noticed, suggesting a possible inhibitory effect on dye removal via biodegradation. By reducing the SRT to 20 d, a worse mixed liquor filterability condition was observed, with a membrane fouling rate (MFR) of 0.979 kPa d-1. In contrast, using the electric current exposure mode of 6'ON/12'OFF resulted in lower membrane fouling propensity, with an MFR of 0.333 kPa d-1. A more attractive cost-benefit ratio for dye removal was obtained using the exposure mode of 6'ON/30'OFF, for which the energy demand was estimated at 21.9-22.6 kWh kg dye-1 removed, almost two times lower than that observed for the mode of 6'ON/12'OFF.

Assuntos