RESUMO

Soybean is the main oilseed cultivated worldwide. Even though Brazil is the world's largest producer and exporter of soybean, its production is severely limited by biotic factors. Soil borne diseases are the most damaging biotic stressors since they significantly reduce yield and are challenging to manage. In this context, the present study aimed to evaluate the potential of a bacterial strain (Ag109) as a biocontrol agent for different soil pathogens (nematodes and fungi) of soybean. In addition, the genome of Ag109 was wholly sequenced and genes related to secondary metabolite production and plant growth promotion were mined. Ag109 showed nematode control in soybean and controlled 69 and 45% of the populations of Meloidogyne javanica and Pratylenchus brachyurus, respectively. Regarding antifungal activity, these strains showed activity against Macrophomia phaseolina, Rhizoctonia solani, and Sclerotinia sclerotiorum. For S. sclerotiorum, this strain increased the number of healthy plants and root dry mass compared to the control (with inoculation). Based on the average nucleotide identity and digital DNA-DNA hybridization, this strain was identified as Bacillus velezensis. Diverse clusters of specific genes related to secondary metabolite biosynthesis and root growth promotion were identified, highlighting the potential of this strain to be used as a multifunctional microbial inoculant that acts as a biological control agent while promoting plant growth in soybean.

Assuntos

RESUMO

Zinc (Zn) is a micronutrient considered essential to plants which can be supplied through seed treatment. The treatment of soybean [Glycine max (L.) Merr.] seeds with Zn, however, is still not well known as regards the uptake and mobilization dynamics of the nutrient during the germination process. This study aimed to evaluate the uptake and distribution dynamics of Zn applied to soybean seeds at two levels of vigor during germination using X-ray micro-fluorescence spectroscopy (µ-XRF). Zinc treatments corresponded to 0, 2, 4 and 8 g of Zn per kg of seeds. High and low vigor seeds that had been treated were located appropriately so as to promote germination. Zn intensity measurements with µ-XRF were taken in different parts ("regions") of the seeds (seed coat, cotyledon, and embryonic axis) after 8, 16 and 24 h of imbibition and seedlings (primary root, hypocotyl, plumule, cotyledon, and seed coat) after 48, 72 and 96 h of germination. High vigor seeds showed higher Zn intensity in the embryonic axis in the first 16 h, while low vigor seeds showed higher intensity after 24 h. After 48, 72 and 96 h of germination low vigor seedlings showed higher Zn intensity than high vigor seedlings in the primary root. It was concluded that µ-XRF is an efficient technique for identifying variances in the dynamics of Zn uptake and mobilization during the germination of soybean seeds with different vigor levels.

Assuntos

RESUMO

Foliar fertilization has been used as a supplemental strategy to plant nutrition especially in crops with high yield potential. Applying nutrients in small doses stimulates photosynthesis and increases yield performance. The aim of this study was to evaluate the efficiency of foliar application of molybdenum (Mo) to soybean and maize. The treatments consisted of the presence (+Mo) and absence (-Mo) of supplementation. Plant nutritional status, nitrate reductase (NR) activity, gas exchange parameters, photosynthetic enzyme activity (Rubisco in soybean and maize and PEPcase in maize), total soluble sugar concentration, leaf protein content, shoot dry matter, shoot nitrogen accumulated, number of grains per plant, mass of 100 grains, and grain yield were evaluated. For soybean and maize, application of Mo increased leaf NR activity, nitrogen and protein content, Rubisco activity, net photosynthesis, and grain yield. These results indicate that foliar fertilization with Mo can efficiently enhance nitrogen metabolism and the plant's response to carbon fixation, resulting in improved crop yields.

RESUMO

Currently, food with low levels of pesticides, sustainable agricultural practices and increased crop productivity have gained prominence worldwide. Rhizobacterial inoculants are an alternative to manage large crops that favors sustainable plant growth. Thereby, this study aimed to assess the effect of increasing doses of inoculant based on the rhizobacterium Bacillus subtilis Bs10 compared to the commercial product based on B. subtilis on the development of soybean culture. Two experiments were carried out with two soybean cultivars, M8210 IPRO and M8615 IPRO, assessed at the vegetative and reproductive stages. Doses of B. subtilis Bs10 with 0, 100, 200, 300, 400 mL per 50 kg seeds were inoculated in each experiment, as well as an additional treatment with commercial product based on B. subtilis. Biomass, nodulation, plant height, internodes, number of pods and number of grains of soybean cultivars were assessed. The inoculation of B. subtilis Bs10 significantly (p < 0.05) improved the agronomic characteristics of both soybean cultivars with an increase in shoot and root biomass, nodulation, phosphorus content, and accumulation of nitrogen in the aerial part. The doses of B. subtilis Bs10 between 200 and 350 mL had significant prominence in increasing the variables studied herein.(AU)

Atualmente, alimentos com baixo teor de agrotóxicos, práticas agrícolas sustentáveis e aumento da produtividade das lavouras têm ganhado destaque no mundo. Inoculantes de rizobactérias são uma alternativa no manejo de grandes lavouras, o que favorece o crescimento sustentável das plantas. Assim, este estudo teve como objetivo avaliar o efeito de doses crescentes do inoculante à base de Rhizobacteria Bacillus subtilis Bs10 em comparação ao produto comercial à base de B. subtilis no desenvolvimento da cultura da soja. Dois experimentos foram conduzidos com as cultivares de soja M8210 IPRO e M8615 IPRO e avaliados nas fases vegetativa e reprodutiva. Doses de B. subtilis Bs10 com 0, 100, 200, 300, 400 mL por 50 kg de sementes foram inoculadas em cada experimento, bem como tratamento adicional com produto comercial à base de B. subtilis. Foram avaliadas biomassa, nodulação, altura de planta, entrenós, número de vagens e número de grãos de cultivares de soja. A inoculação de B. subtilis Bs10 melhorou significativamente (p < 0,05) as características agronômicas de ambas as cultivares de soja com aumento na biomassa da parte aérea e radicular, nodulação, teor de fósforo e acúmulo de nitrogênio na parte aérea. As doses de B. subtilis Bs10 entre 200 e 350 mL destacaram-se significativamente no aumento das variáveis estudadas neste trabalho.(AU)

Assuntos

RESUMO

Conyza spp. is among the main weeds reported worldwide. Due to its aggressiveness, such as high seed production and dispersion, and the growing reports of biotypes resistant to glyphosate, paraquat, and other herbicides, different control practices are required. Thus, this study aimed to evaluate the efficacy of herbicides with sequential application of glufosinate in soybean pre-sowing for control of Conyza spp. with indicative of resistant to paraquat. The study was carried out in the field, at Assis Chateaubriand and Palotina, state of Paraná, Brazil, in the 2018/19 season. The experiments were conducted in a randomized block design with four replications. The treatments consisted in application of glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat and imazethapyr/flumioxazin, at different combinations, in soybean pre-sowing. Control of Conyza spp., crop injury to soybean plants and variables related to agronomic performance (plant height and yield) were evaluated. All treatments were selective for soybean, which showed stronger crop injury in the presence of diclosulam herbicide, but this did not compromise soybean agronomic performance. In general, control levels were high for the treatments used. Except for paraquat treatments, in the area with the highest frequency of Conyza spp. with indicative of resistant to paraquat, and imazethapyr/flumioxazin treatment in both areas. These control results emphasized the importance of glufosinate in this management system and showed promising results for saflufenacil/imazethapyr.(AU)

A planta daninha Conyza spp. está entre as principais encontradas em todo o mundo. Devido a sua agressividade, como elevada produção e dispersão de sementes e os crescentes relatos de biótipos resistentes ao glyphosate, paraquat e outros herbicidas, faz-se necessário o uso de diferentes ferramentas de manejo. Assim, o objetivo deste estudo foi avaliar a eficácia de herbicidas com aplicação sequencial de glufosinate em pré-semeadura da soja, no controle de Conyza spp. com indicativo de resistência ao paraquat. O estudo foi realizado em campo nos municípios de Assis Chateaubriand e Palotina, estado do Paraná (PR), Brasil, na safra 2018/19. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. Os tratamentos foram compostos pela aplicação de glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat e imazethapyr/flumioxazin, em diferentes combinações em pré-semeadura da soja. Foram avaliados controle de Conyza spp., sintomas de injúria nas plantas de soja e variáveis relacionadas ao desempenho agronômico (altura de plantas e produtividade). Todos os tratamentos mostraram-se seletivos a soja. Visualizou-se maiores sintomas de injúria quando se tinha a presença do herbicida diclosulam, mas não resultou em danos ao desempenho agronômico da soja. De forma geral os níveis de controle foram altos para os tratamentos utilizados, em exceção para os tratamentos com paraquat na área que apresentava maior frequência de Conyza spp. com indicativo de resistência a este herbicida, e para o tratamento com imazethapyr/flumioxazin nas duas áreas. Estes resultados de controle enfatizam a importância do glufosinate neste sistema de manejo e demostram resultados promissores para saflufenacil/imazethapyr.(AU)

Assuntos

RESUMO

ABSTRACT: Conyza spp. is among the main weeds reported worldwide. Due to its aggressiveness, such as high seed production and dispersion, and the growing reports of biotypes resistant to glyphosate, paraquat, and other herbicides, different control practices are required. Thus, this study aimed to evaluate the efficacy of herbicides with sequential application of glufosinate in soybean pre-sowing for control of Conyza spp. with indicative of resistant to paraquat. The study was carried out in the field, at Assis Chateaubriand and Palotina, state of Paraná, Brazil, in the 2018/19 season. The experiments were conducted in a randomized block design with four replications. The treatments consisted in application of glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat and imazethapyr/flumioxazin, at different combinations, in soybean pre-sowing. Control of Conyza spp., crop injury to soybean plants and variables related to agronomic performance (plant height and yield) were evaluated. All treatments were selective for soybean, which showed stronger crop injury in the presence of diclosulam herbicide, but this did not compromise soybean agronomic performance. In general, control levels were high for the treatments used. Except for paraquat treatments, in the area with the highest frequency of Conyza spp. with indicative of resistant to paraquat, and imazethapyr/flumioxazin treatment in both areas. These control results emphasized the importance of glufosinate in this management system and showed promising results for saflufenacil/imazethapyr.

RESUMO: A planta daninha Conyza spp. está entre as principais encontradas em todo o mundo. Devido a sua agressividade, como elevada produção e dispersão de sementes e os crescentes relatos de biótipos resistentes ao glyphosate, paraquat e outros herbicidas, faz-se necessário o uso de diferentes ferramentas de manejo. Assim, o objetivo deste estudo foi avaliar a eficácia de herbicidas com aplicação sequencial de glufosinate em pré-semeadura da soja, no controle de Conyza spp. com indicativo de resistência ao paraquat. O estudo foi realizado em campo nos municípios de Assis Chateaubriand e Palotina, estado do Paraná (PR), Brasil, na safra 2018/19. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. Os tratamentos foram compostos pela aplicação de glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat e imazethapyr/flumioxazin, em diferentes combinações em pré-semeadura da soja. Foram avaliados controle de Conyza spp., sintomas de injúria nas plantas de soja e variáveis relacionadas ao desempenho agronômico (altura de plantas e produtividade). Todos os tratamentos mostraram-se seletivos a soja. Visualizou-se maiores sintomas de injúria quando se tinha a presença do herbicida diclosulam, mas não resultou em danos ao desempenho agronômico da soja. De forma geral os níveis de controle foram altos para os tratamentos utilizados, em exceção para os tratamentos com paraquat na área que apresentava maior frequência de Conyza spp. com indicativo de resistência a este herbicida, e para o tratamento com imazethapyr/flumioxazin nas duas áreas. Estes resultados de controle enfatizam a importância do glufosinate neste sistema de manejo e demostram resultados promissores para saflufenacil/imazethapyr.

RESUMO

Soybean [Glycine max (L.) Merr.] grain yield is closely associated with the level of optimal nitrogen (N) supply, especially during the reproductive stages. Foliar fertilization with low rates of N have been considered as a strategy for furnishing additional N and enhancing grain yields. Field studies using 15N tracer were conducted over two growing seasons to investigate the impact of foliar N fertilization on grain yield, plant N content, the amount of N derived from fertilizer (NDFF) and N recovery efficiency (NRE). Four foliar N rates (0, 1300, 2600 and 3900 g ha−1) were supplied by two equal split applications at the R1 and R3 stages. Foliar N fertilization of soybean canopies did not affect grain yield, grain N content, shoot N content nor plant N content. Total NDFF was increased from 0.7 to 2.0 kg ha−1 across the N rates. Nonetheless, NRE was unaffected by foliar N fertilization, which averaged 53 %. Soybean plants allocated the same amount of N fertilizer to both grains and shoots. No significant effects of low rate foliar N fertilization were registered on soybean grain yield nor plant N content, despite considerable N fertilizer recovery by plant organs.

RESUMO

Soybean [Glycine max (L.) Merr.] grain yield is closely associated with the level of optimal nitrogen (N) supply, especially during the reproductive stages. Foliar fertilization with low rates of N have been considered as a strategy for furnishing additional N and enhancing grain yields. Field studies using 15N tracer were conducted over two growing seasons to investigate the impact of foliar N fertilization on grain yield, plant N content, the amount of N derived from fertilizer (NDFF) and N recovery efficiency (NRE). Four foliar N rates (0, 1300, 2600 and 3900 g ha−1) were supplied by two equal split applications at the R1 and R3 stages. Foliar N fertilization of soybean canopies did not affect grain yield, grain N content, shoot N content nor plant N content. Total NDFF was increased from 0.7 to 2.0 kg ha−1 across the N rates. Nonetheless, NRE was unaffected by foliar N fertilization, which averaged 53 %. Soybean plants allocated the same amount of N fertilizer to both grains and shoots. No significant effects of low rate foliar N fertilization were registered on soybean grain yield nor plant N content, despite considerable N fertilizer recovery by plant organs.(AU)

RESUMO

In this work, deleterious effects in soils due to the presence of dielectric fluids were investigated. For this purpose, vegetable (Envirotemp® FR3) and mineral (Lubrax AV 66 IN) oils were used for simulating a set of soils contaminated in different oil contents (0.5, 1.0, 2.0, 2.5, 5.0, 7.5 and 10%) in which three 120-days soybean crop periods (SCP) were carried out using the species Glycine max (L.) Merr. Both soil and soybean plant samples were analysed on following the changes on chemical attributes, content of oils and greases (COG) in soils and phytotechnical characteristics of soybean plant. No significant changes on soil chemical attributes were found. For a 0.5% vegetable oil fraction, COG removals of 35, 60 and 90% were observed after the 1st, 2nd, and 3rd SCPs, respectively, whereas removals of 25, 40 and 70% were observed for 0.5% mineral oil fraction after the 1st, 2nd, and 3rd SCPs, respectively. There was an effectively accumulated removal on all tested oil fractions as being proportional to the integrated 120-days SCPs, suggesting a lesser number of crops for a complete abatement of oil fraction in soil. A 100% recovery on the seedlings emergence fractions was also evidenced, revealing that at least a number of 7 and 9 SCPs should be applied continuously in soils contaminated by vegetable and mineral oils, respectively, in order to no longer jeopardize soybean plant growth. Finally, an empirical prediction of the number of SCPs necessary for the complete removal of oil from the soil was proposed.

Assuntos

RESUMO

ABSTRACT The aim of this study was to evaluate the effect of different seed coatings consisting of various combinations of three nutrients (calcium, magnesium and silicon) on two soybean cultivars (BRS 243 RR and CD 233 RR). Dolomitic limestone and aluminum silicate were chosen as the nutrient sources. Leaf area, plant height, shoots dry matter, crop growth rate, relative growth rate and net assimilation rate were the studied variables, evincing that the seed coating that comprised calcium, magnesium and silicon led to better performance in terms of growth rates 30 days after emergence. Significant differences in the response to the seed coatings were also observed between the two studied soybean genotypes.