RESUMO

Los salmónidos, durante su desarrollo, pueden experimentar ocasionalmente deformaciones esqueléticas. Para su diagnóstico se emplean diversas metodologías, entre las que se incluyen radiografías, técnicas histológicas, diafanización con tinciones de alizarina y azul de alcián, así como el uso del microscopio electrónico de barrido (SEM), cada una con sus inherentes ventajas y desventajas. Este estudio tuvo como finalidad evaluar y comparar la eficacia de la tomografía microcomputarizada (Micro-CT) para el análisis anatómico, reconstruyendo tridimensionalmente las imágenes y contrastándolas con los resultados obtenidos mediante la técnica de diafanización. Se analizaron las aletas caudales de cinco ejemplares de salmón Oncorhynchus kisutch: dos sujetos a diafanización y tres procesados para análisis mediante Micro-CT utilizando el equipo BRUKER SkyScan 1272. La técnica de Micro-CT demostró superioridad en la resolución de las estructuras óseas, facilitando una exploración detallada de las variaciones morfológicas y la distribución de la densidad mineral. Este enfoque permitió identificar anomalías en la morfología y crecimiento de las últimas vértebras y lepidotriquias dorsales, así como una densidad incrementada en lepidotriquias dorsales malformadas. La mayor resolución proporcionada por la Micro-CT no solo potencia nuestra comprensión de la ontogenia piscícola y su adaptación a ambientes diversos, sino que además inaugura perspectivas innovadoras para el estudio de la evolución de las estrategias locomotoras y las respuestas adaptativas frente a cambios ambientales a través del tiempo.

SUMMARY: During their development, some species of salmonids may occasionally experience skeletal deformations. Several methodologies are currently being used for the diagnosis of such malformations, among which X-rays, histological techniques, diaphanization coupled either with Alizarin Red or Alcian Blue stains, as well as Scanning Electron Microscopy (SEM) can be mentioned. Each one of those methods presents inherent advantages and disadvantages. The purpose of this study was twofold: Firstly, to evaluate and compare the effectiveness of microcomputed tomography (Micro-CT) technology for anatomical analysis, three-dimensionally reconstructing the obtained images; and secondly, to contrast those images with the results obtained through the diaphanization technique. The caudal fins of five specimens of the Oncorhynchus kisutch salmon were analyzed: Two specimens were subjected to diaphanization and three were processed for Micro-CT analysis, using the BRUKER SkyScan 1272 equipment. The Micro-CT technology demonstrated superiority in the resolution of bone structures, facilitating a detailed exploration of morphological variations, as well as the distribution of mineral density. This experimental approach allowed us to identify anomalies in the morphology and growth of the last vertebrae and dorsal lepidotrichiae, as well as an increased mineral density in the malformed dorsal lepidotrichiae. The higher resolution provided by Micro-CT not only enhances our understanding of the fish ontogeny and its adaptation to diverse environments, but also opens innovative perspectives for the study of the evolution of locomotor strategies and adaptive responses to environmental changes.

Assuntos

RESUMO

Introduction: This study aimed to compare the effectiveness of two endodontic cleaning techniques, passive ultrasonic irrigation (PUI) and the XP-endo Finisher R (XPR) system, in removing residual filling material during endodontic retreatment procedures. Materials and Methods: Forty mandibular premolars with oval canals were divided into four groups based on the sealer used (AH-Plus or Bio-C Sealer) and the cleaning technique employed (PUI or XPR). To ensure uniformity of canal volume among groups, initial micro-CT scans were conducted. The canals were instrumented, filled, and then re-instrumented before undergoing either PUI or XPR cleaning techniques. Residual filling material volumes were assessed through micro-CT scans, and statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Following instrumentation, there was no significant difference in residual filling material volumes between AH-Plus and Bio-C Sealer groups (1.35 mm3and 1.02 mm3, respectively; P>0.05). However, after supplementary cleaning techniques, XPR-cleaned specimens exhibited significantly less residual material compared to PUI-cleaned specimens (0.01 mm3 and 0.29 mm3 for Bio-C Sealer, and 0.07 mm3 and. 0.30 mm3 for AH-Plus, P<0.05). Conclusion: The XPR system was found to be more effective than PUI in removing residual filling material from Bio-C Sealer-filled root canals. This highlights its potential as a useful supplementary cleaning technique in endodontic retreatment procedures.

RESUMO

This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.

RESUMO

AIM: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. METHODOLOGY: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

RESUMO

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. AIM: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. MATERIALS AND METHODS: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. RESULTS: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. CONCLUSIONS: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. OBJETIVO: analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. MATERIALES Y MÉTODOS: se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. RESULTADOS: No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. CONCLUSIONES: Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

Assuntos

RESUMO

The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. AIM: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. MATERIAL AND METHOD: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. RESULTS: Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). CONCLUSIÓN: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.

A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. OBJETIVO: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. MATERIAL E MÉTODO: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. RESULTADOS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). CONCLUSÃO: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.

Assuntos

RESUMO

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

Assuntos

RESUMO

Introduction: The anatomical configuration classified as Vertucci's type III is described as the second most prevalent in mandibular incisors. Methods: Thirty-six Vertucci's type III mandibular incisors were evaluated by micro-computed tomography (micro-CT) and divided into 3 groups (n = 12) according to the root canal preparation protocol (HyFlex CM [HCM], HyFlex EDM [HEDM], and Sequence Rotary File [SRF]). The teeth were scanned before and after performing 0.25 mm and 0.40 mm apical diameter preparations. The canal volume, dentin thickness, percentage of accumulated debris and untouched canal areas, transportation, and centering ability were measured. The data were statistically analyzed by ANOVA, Tukey, Kruskal-Wallis, and Dunn tests (P < 0.05). Results: The volume increase was more evident in the apical third. After 0.40 mm preparation, the SRF system provided a higher reduction (P < 0.05) in dentin thickness on the buccal surface 1 mm from the apex. There was higher canal transportation in the bucco-lingual direction. The 0.40 mm apical preparation reduced the percentage of untouched canal areas. The apical third had the highest percentage of untouched canal areas. The cervical third had the lowest volume of accumulated debris. Conclusions: Increasing the apical preparation to a diameter of 0.40 mm with the HCM, HEDM, and SRF systems in Vertucci's type III root canals of mandibular incisors proved to be safe and effective, reducing untouched canal areas. Clinical relevance: Root flattening can be intense to the point of generating a root canal bifurcation. Despite the decrease in the root canal diameter, a greater enlargement of the apical region is necessary and safe.

RESUMO

ABSTRACT Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. Aim To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. Materials and methods Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. Results No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. Conclusions The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

RESUMEN La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. Objetivo analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. Materiales y Método se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. Resultados No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. Conclusiones Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

RESUMO

ABSTRACT The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. Aim The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. Material and Method Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. Results Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). Conclusión Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.

RESUMO A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. Objetivo O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. Material e Método Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. Resultados O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). Conclusao O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.