RESUMO
SUMMARY: Binge drinking in adolescents has a negative effect on the developing skeleton and the attainment of peak bone mass. Our study aimed to examine the effect of binge drinking on the growth and functional integrity of the adolescent Sprague Dawley rat mandible and to determine if a dosage of 1.5 g/kg is sufficient to produce a binge-model of consumption. A total of eight 7-week-old adolescent (male) Sprague Dawley rats were randomly placed into 4 groups with two rats each: 1-week alcohol-exposed rats, 1-week pair- fed control rats, 4-week alcohol-exposed rats and 4-week pair-fed control rats. The alcohol exposed groups were administered a single daily dose via oral gavage of 1.5 g/kg of 20 % alcohol 3 days a week (alternate days) for 7 or 28 days. The pair-fed control groups were administered a caloric equivalent dose of maltose dextrin via oral gavage on the same days as the alcohol-exposed rats. The one-week alcohol exposed, and control rats were terminated on day 7 and the four-week alcohol exposed and control rats on day 28. The mandibles were dissected out and osteometric measurements determined using a digital vernier caliper. Bones were scanned using a 3D-microCT scanner (Nikon XTH 255L). Biomechanical tests were done using a Shimadzu universal testing machine. Differences observed were regarding mandibular osteometry, which showed a reduced height in the central portion of the alveolar bone (Al'-Me), and an increase in the height of the condylar head (Cd-Ag) in the 1-week alcohol-exposed rats when compared to the 1-week pair-fed control rats. No other differences were noted. Lack of significant changes seen between the alcohol and pair-fed control groups in both acute binge and chronic binge exposed rats is likely due to the low dose of alcohol administered to the rats in the study thus a higher dose is proposed.
El consumo excesivo de alcohol en adolescentes tiene un efecto negativo en el desarrollo del esqueleto y en la consecución de la masa ósea máxima. Nuestro estudio tuvo como objetivo examinar el efecto del consumo excesivo de alcohol sobre el crecimiento y la integridad funcional de la mandíbula de la rata adolescente Sprague Dawley y determinar si una dosis de 1,5 g/kg es suficiente para producir un modelo de consumo compulsivo. Un total de ocho ratas Sprague Dawley adolescentes (machos) de 7 semanas de edad se colocaron aleatoriamente en 4 grupos con dos ratas cada uno: ratas expuestas al alcohol durante 1 semana, ratas de control alimentadas en parejas durante 1 semana, ratas expuestas al alcohol durante 4 semanas, y ratas de control alimentadas en parejas durante 4 semanas. A los grupos expuestos al alcohol se les administró una dosis única diaria mediante sonda oral de 1,5 g/kg de alcohol al 20 % 3 días a la semana (días alternos) durante 7 o 28 días. A los grupos de control alimentados por parejas se les administró una dosis calórica equivalente de maltosa dextrina mediante sonda oral los mismos días que a las ratas expuestas al alcohol. Las ratas expuestas al alcohol durante una semana, las ratas de control al día 7, las ratas expuestas al alcohol durante cuatro semanas y las ratas de control al día 28. Se diseccionaron las mandíbulas y se determinaron las mediciones osteométricas utilizando un calibre vernier digital. Los huesos se escanearon utilizando un escáner 3D-microCT (Nikon XTH 255L). Las pruebas biomecánicas se realizaron utilizando una máquina de pruebas universal Shimadzu. Las diferencias observadas se relacionaron con la osteometría mandibular, que mostró una altura reducida en la porción central del hueso alveolar (Al'-Me) y un aumento en la altura de la cabeza condilar (Cd-Ag) en las ratas expuestas al alcohol durante una semana, en comparación con las ratas control alimentadas en parejas durante una semana. No se observaron otras diferencias. La falta de diferencias significativas entre los grupos de alcohol y de control alimentados en parejas expuestas a ebriedad aguda y ebriedad crónica, probablemente se deba a la baja dosis de alcohol administrada a las ratas en el estudio, por lo que se propone una dosis más alta.
Assuntos
Animais , Masculino , Ratos , Etanol/administração & dosagem , Consumo Excessivo de Bebidas Alcoólicas , Mandíbula/efeitos dos fármacos , Resistência à Tração , Ratos Sprague-Dawley , Concentração Alcoólica no Sangue , Mandíbula/anatomia & histologiaRESUMO
SUMMARY: Stature estimation is one of the essential procedures for personal identification in forensic osteology. Therefore, the purposes of this study are to analyze the correlation between length and width of metatarsal measurements and stature, and to develop the regression equations for a Thai population. In this study, the samples were divided into two groups. The first group was called the "training group" for generating stature estimation equations, comprised of 200 skeletons, aged between 19-94 years. The second group was called the "test group" for evaluating the accuracy of generated equations, comprising 40 skeletons. The correlation between metatarsal parameters and stature were moderate to high, and all variables had positive significant correlation with stature. For males, the left ML2 is the length variable that showed the most correlation degree against stature (r=0.702), and the left MSW4 is the width variable that had the most correlation degree against stature (r=0.483). For females, right ML1 is the length variable that had the most correlation degree against stature (r=0.632), and right PW3 is the width stature that had the most correlation degree against stature (r=0.481). For all samples, left ML1 was the length variable that had the most correlation degree against stature (r=0.796) and right PW3 was the width variable that had the most correlation degree against stature (r=0.712). The results of generating multiple regression equations using a stepwise method reveals that the correlation coefficient (R) and standard error of estimate (SEE) were 0.761 and 4.96 cm, respectively, for males, and 0.752 and 4.93 cm for females, with 0.841 and 5.26 cm for all samples, respectively. According to these results, the mean of absolute error from the test group ranged from 3 to 5 cm. Therefore, stature estimation equations using length and width of metatarsals from our study can be applied to estimate stature in the Thai population.
La estimación de la estatura es uno de los procedimientos esenciales para la identificación personal en osteología forense. Por lo tanto, los propósitos de este estudio fueron analizar la correlación entre la longitud y el ancho de las medidas metatarsianas y la estatura, y desarrollar las ecuaciones de regresión para una población tailandesa. Las muestras se dividieron en dos grupos. El primer grupo se denominó "grupo de entrenamiento" para generar ecuaciones de estimación de estatura, compuesto por 200 esqueletos, con edades comprendidas entre los 19 y los 94 años. El segundo grupo se denominó "grupo de prueba" para evaluar la precisión de las ecuaciones generadas, que comprende 40 esqueletos. La correlación entre los parámetros metatarsianos y la estatura fue de moderada a alta, y todas las variables tuvieron una correlación significativa positiva con la estatura. Para el sexo masculino, la variable longitud ML2 izquierda es la que mayor grado de correlación presentó con la estatura (r=0,702), y la izquierda MSW4 fue la variable ancho la que mayor grado de correlación presentó con la estatura (r=0,483). Para el sexo femenino, ML1 derecho fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,632), y PW3 derecha fue la variable ancho estatura que tuvo mayor grado de correlación con la estatura (r=0,481). Para todas las muestras, ML1 izquierdo fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,796) y PW3 derecha fue la variable ancho que tuvo mayor grado de correlación con la estatura (r=0,712). Los resultados de generar ecuaciones de regresión múltiple usando un método paso a paso revela que el coeficiente de correlación (R) y el error estándar de estimación (SEE) fueron 0,761 y 4,96 cm, respectivamente, para los hombres y 0,752 y 4,93 cm para las mujeres, con 0,841 y 5,26 cm para todas las muestras, respectivamente. De acuerdo con estos resultados, la media del error absoluto del grupo de prueba osciló entre 3 y 5 cm. Por lo tanto, las ecuaciones de estimación de la estatura que utilizan la longitud y el ancho de los metatarsianos de nuestro estudio se pueden aplicar para estimar la estatura en la población tailandesa.
Assuntos
Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Idoso , Idoso de 80 Anos ou mais , Adulto Jovem , Estatura , Ossos do Metatarso/anatomia & histologia , Antropologia Forense , Tailândia , Análise de Regressão , OsteologiaRESUMO
SUMMARY: Analysis and systematization of the longitudinal dimensions of the phalanges of the index and ring fingers for the classification of morphological types of the hand using classification and regression trees (CART). X-rays of the hands of 50 men and 50 women (mean age 47.16 (10.1) years, range 23-65 years) were studied. Each hand, depending on the ratio of the length of the index and ring fingers, was classified into three types: radial (R, 2d>4d), indefinite (N, 2d=4d), ulnar (U, 2d>4d). Morphometry of radiographs included measurements of the lengths of the proximal (PP), middle (MP), and distal (DP) phalanges. The sex differences of the analyzed indicators are statistically significant. There were no significant bilateral differences between the phalanges of the II and IV fingers in length, regardless of sex (p>0.05). A set of rules for classifying the morphological types of the hand depending on the lengths of the phalanges of the index and ring fingers was created by constructing a binary decision tree. The CART method demonstrates the usefulness of this statistical procedure for developing a scientifically based prediction of the morphological type of the hand. The results of this study can be the basis of an algorithm for determining the morphological type of the hand depending on the length of the phalanges of the fingers.
RESUMEN: En este estudio se realizó un análisis y sistematización de las dimensiones longitudinales de las falanges de los dedos índice y anular para la clasificación de tipos morfológicos de la mano, mediante árboles de clasificación y regresión (CART). Se estudiaron radiografías de las manos de 50 hombres y 50 mujeres (edad media 47,16 (10,1) años, rango 23-65 años). Cada mano, según la proporción de la longitud de los dedos índice y anular, se clasificó en tres tipos: radial (R, 2d> 4d), indefinida (N, 2d = 4d), ulnar (U, 2d> 4d). La morfometría de las radiografías incluyó mediciones de las longitudes de las falanges proximal (FP), media (FM) y distal (FD). Las diferencias de sexo de los indicadores analizados fueron estadísticamente significativas. No hubo diferencias bilaterales significativas entre las falanges de los dedos II y IV en longitud, independientemente del sexo (p> 0,05). Se creó un conjunto de reglas para clasificar los tipos morfológicos de la mano en función de las longitudes de las falanges de los dedos índice y anular mediante la construcción de un árbol de decisión binario. El método CART demuestra la utilidad de este procedimiento estadístico para desarrollar una predicción con base científica del tipo morfológico de la mano. Los resultados de este estudio pueden ser la base de un algoritmo para determinar el tipo morfológico de la mano en función de la longitud de las falanges de los dedos.
Assuntos
Humanos , Masculino , Feminino , Falanges dos Dedos da Mão/diagnóstico por imagem , Mãos/diagnóstico por imagem , Modelos Logísticos , Classificação , Falanges dos Dedos da Mão/anatomia & histologia , Mãos/anatomia & histologiaRESUMO
Fish skeletal remains recovered from two archaeological sites dated in the Middle Holocene of Tierra del Fuego (Argentina) were analysed to describe habitat use patterns by hake in the past and predict changes in a warmer world. Mitochondrial DNA was successfully extracted and amplified from 42 out of 45 first vertebra from ancient hake and phylogenetic analysis assigned all haplotypes to Argentine hake (Merluccius hubbsi). According to osteometry, the Argentine hake recovered from the archaeological site were likely adults ranging 37.2-58.1 cm in standard length. C and N stable isotope analysis showed that currently Argentine hake use foraging grounds deeper than those of Patagonian blenny and pink cusk-eel. Argentine hake, however, had a much broader isotopic niche during the Middle Holocene, when a large part of the population foraged much shallower than contemporary pink cusk-eel. The overall evidence suggests the presence of large numbers of Argentine hake onshore Tierra del Fuego during the Middle Holocene, which allowed exploitation by hunter-gatherer-fisher groups devoid of fishing technology. Interestingly, average SST off Tierra del Fuego during the Middle Holocene was higher than currently (11 °C vs 7 °C) and matched SST in the current southernmost onshore spawning aggregations, at latitude 47 °S. This indicates that increasing SST resulting from global warming will likely result into an increased abundance of adult Argentine hake onshore Tierra del Fuego, as during the Middle Holocene. Furthermore, stable isotope ratios from mollusc shells confirmed a much higher marine primary productivity during the Middle Holocene off Tierra del Fuego.
Assuntos
Gadiformes , Animais , Argentina , Ecossistema , Aquecimento Global , FilogeniaRESUMO
Lutjanus argentiventris presents a large intertropical distribution within the Eastern Pacific, which is as important to fisheries now as it was in the pre-Hispanic period. The purpose of this article is to present an allometric model that enables the size and weight of L. argentiventris to be predicted, using the isolated bones found in archaeological and paleontological contexts or the stomach contents of ichthyophagous species. A modern collection of L. argentiventris from Ecuador was used, composed of 37 individuals covering a wide range of sizes and weights. The total length (TL), standard length (SL), and total fresh weight (W) of each individual was gathered. The TL of the sample ranged between 210 and 760 mm, the SL between 164 and 627 mm and the W ranged between 123 and 6550 g. The most frequent bones (15) and otoliths were chosen and 39 measurements were taken. The total length-weight relationship was W = 6E-06 TL3.1513 with R 2 = 0.997. In general, it was observed that the relationships between the TL and the bone measurements had a strong correlation (R² > 0.95). The allometric model will be useful not only for archaeologists but also for biologists working on historical ecology.(AU)
Lutjanus argentiventris presenta una distribución intertropical en el Pacífico Oriental, siendo una especie importante desde épocas prehispánicas hasta la actualidad. El propósito de este artículo es presentar un modelo alométrico que prediga la talla y el peso de L. argentiventris, usando restos óseos aislados encontrados en contextos arqueológicos y paleontológicos. Se empleó una colección de 37 individuos con tallas y pesos variados, provenientes del Ecuador. La longitud total (LT), la longitud estándar (LE) y el peso (P) de cada individuo fueron recolectados. La LT varió entre 210 y 760 mm, la LE entre 164 y 627 mm y el P entre 123 y 6550 g. Se escogieron los huesos más frecuentes (15) y los otolitos para realizar 39 mediciones. La relación de la longitud total y el peso fue P = 6E-06 TL3,1513 con un valor de R 2 = 0,997. En términos generales se observa que las relaciones entre la LT y las medidas de los huesos presentan una correlación fuerte (R² > 0,95). El modelo alométrico presentado puede utilizarse para predecir el tamaño y el peso, no sólo de L. argentiventris, sino también de sus congéneres, y será útil para arqueólogos y biólogos interesados en ecología histórica.(AU)
Assuntos
Animais , Pesos e Medidas , Perciformes , Membrana dos OtólitosRESUMO
Lutjanus argentiventris presents a large intertropical distribution within the Eastern Pacific, which is as important to fisheries now as it was in the pre-Hispanic period. The purpose of this article is to present an allometric model that enables the size and weight of L. argentiventris to be predicted, using the isolated bones found in archaeological and paleontological contexts or the stomach contents of ichthyophagous species. A modern collection of L. argentiventris from Ecuador was used, composed of 37 individuals covering a wide range of sizes and weights. The total length (TL), standard length (SL), and total fresh weight (W) of each individual was gathered. The TL of the sample ranged between 210 and 760 mm, the SL between 164 and 627 mm and the W ranged between 123 and 6550 g. The most frequent bones (15) and otoliths were chosen and 39 measurements were taken. The total length-weight relationship was W = 6E-06 TL3.1513 with R 2 = 0.997. In general, it was observed that the relationships between the TL and the bone measurements had a strong correlation (R² > 0.95). The allometric model will be useful not only for archaeologists but also for biologists working on historical ecology.(AU)
Lutjanus argentiventris presenta una distribución intertropical en el Pacífico Oriental, siendo una especie importante desde épocas prehispánicas hasta la actualidad. El propósito de este artículo es presentar un modelo alométrico que prediga la talla y el peso de L. argentiventris, usando restos óseos aislados encontrados en contextos arqueológicos y paleontológicos. Se empleó una colección de 37 individuos con tallas y pesos variados, provenientes del Ecuador. La longitud total (LT), la longitud estándar (LE) y el peso (P) de cada individuo fueron recolectados. La LT varió entre 210 y 760 mm, la LE entre 164 y 627 mm y el P entre 123 y 6550 g. Se escogieron los huesos más frecuentes (15) y los otolitos para realizar 39 mediciones. La relación de la longitud total y el peso fue P = 6E-06 TL3,1513 con un valor de R 2 = 0,997. En términos generales se observa que las relaciones entre la LT y las medidas de los huesos presentan una correlación fuerte (R² > 0,95). El modelo alométrico presentado puede utilizarse para predecir el tamaño y el peso, no sólo de L. argentiventris, sino también de sus congéneres, y será útil para arqueólogos y biólogos interesados en ecología histórica.(AU)
Assuntos
Animais , Pesos e Medidas , Perciformes , Membrana dos OtólitosRESUMO
RESUMEN Introducción: los estudios actuales sobre la caracterización antropométrica de las vértebras, reviste importancia para las especialidades de Ortopedia y Neurocirugía por el interés quirúrgico que tiene este conocimiento. Objetivo: caracterizar las dimensiones antropométricas de las vértebras cervicales pertenecientes a la Osteoteca de la Universidad de Ciencias Médicas de Matanzas. Materiales y métodos: se realizó un estudio descriptivo, observacional. El universo de estudio estuvo integrado por 63 vértebras cervicales existentes en la Osteoteca. Se realizaron medidas del cuerpo, agujero vertebral, agujeros transversos y forma de los mismos. Resultados: los valores de las medidas del cuerpo vertebral mostraron un predominio de la media del diámetro transversal con 24,24 mm, sobre el anteroposterior de 15,57 mm. El diámetro transversal del agujero vertebral, midió 25,70 mm y el anteroposterior fue menor con 17,06 mm. Al estudiar la forma de los agujeros transversos, en total predominó el tipo redondo; mientras que al compararlos según lateralidad, en el lado izquierdo predominó el tipo redondo, mientras que en el derecho fue el tipo oval paralelo. Se observó en ambos agujeros transversos el predominio del diámetro transverso sobre el paralelo y comparando los agujeros entre sí, se oapreció una media mayor de ambos diámetros en los agujeros del lado izquierdo. Conclusiones: existió un predominio del diámetro transversal en el cuerpo y el agujero vertebral. Es más frecuente el tipo de agujero transverso redondo y los agujeros izquierdos presentaron mayores dimensiones (AU).
ABSTRACT Introduction: current studies on vertebras anthropometric characterization are of great importance for the specialties of Orthopedics and Neurosurgery due to the surgical interest of this knowledge. Objective: to characterize the anthropometric dimensions of the cervical vertebras belonging to the Osteotheque of the University of Medical Sciences of Matanzas. Materials and Methods: an observational, descriptive study was carried out. The universe of study was integrated by 63 cervical vertebras kept in the Osteotheque. Measures of the body, vertebral foramen and foramen transversarium were taken and their form was described. Results: the values of the vertebral body measures showed the predominance of the average transverse diameter with 24.24 mm, over the anterior-posterior one of 15.57 mm. The transverse diameter of the vertebral foramen was 25.70 mm, and the anterior-posterior one was 17.06 mm. When studying the form of the transverse foramens, in general the round kind predominated; at the comparison according to laterality, the round kind predominated in the left side while in the right the oval parallel one predominated. In both foramens transversaria the predominance of the transverse diameter over the parallel one was observed and when comparing both foramens, a higher diameter average was found in the left side foramens. Conclusions: there is a predominance of the transverse diameter in the body and vertebral foramen. The most frequent foramen was the round transverse one and left foramens had higher dimensions (AU).
Assuntos
Humanos , Coluna Vertebral/anatomia & histologia , Universidades , Vértebras Cervicais/anatomia & histologia , Antropometria , Bibliotecas Especializadas , Ortopedia , Especialidades Cirúrgicas , Epidemiologia Descritiva , Estudo Observacional , Medicina , NeurocirurgiaRESUMO
O membro torácico é a parte do esqueleto pós-craniano que mais informações oferece sobre a locomoção e hábitos de vida de uma espécie. Objetivou-se realizar uma descrição macroscópica, comparativa, radiográfica e osteométrica do esqueleto do membro torácico de Lycalopex gymnocercus. Para tal foram analisados ossos de 24 espécimes adultos coletados mortos em rodovias. Foram realizadas descrições macroscópicas e comparadas com as de outros canídeos, imagens radiográficas para reconhecimento dos padrões de trabeculação e topografia óssea, mensurações lineares e tridimensionais e avaliações histológicas das clavículas. O esqueleto do membro torácico de L. gymnocercus apresentou adaptações morfofuncionais em todos os segmentos para a locomoção cursorial especializada e alguma capacidade de pronação e supinação para captura de presas de porte menor. Houve uma tendência de os ossos serem maiores nos machos, especialmente na região distal do úmero, presumivelmente para a fixação de músculos antebraquiais mais fortes. A clavícula vestigial foi encontrada em todos os espécimes, teve natureza predominantemente cartilagínea e foi significativamente maior nos machos. A conformação básica do esqueleto do membro torácico foi semelhante à dos canídeos domésticos e silvestres descritos na literatura, ainda que particularidades de L. gymnocercus sejam encontradas.(AU)
The forelimb is the part of the post-cranial skeleton that provides more information about locomotion and life habits of a species. The objective of this study was to perform a detailed macroscopic, comparative, radiographic and osteometric investigation of the thoracic limb of Lycalopex gymnocercus. Twenty-four adult specimens collected dead from roadkill were studied. Analysis included macroscopic and comparative descriptions to other canids, radiographic images for recognition of trabeculation patterns and topographical arrangement of bones, linear and three-dimensional measurements, and histological evaluation of the clavicles. The forelimb skeleton of L. gymnocercus presented morphological and functional adaptations in every segment for a specialized cursorial locomotion and some ability to pronation and supination for capture of small vertebrates. There was a tendency for the bones to be longer in males, especially in the distal end of humerus, presumably to fixation of stronger antebrachial muscles. The vestigial clavicle bone was found in all the specimens, had a predominantly cartilaginous nature and was significantly larger in males. The basic conformation of the forelimb skeleton was similar to that of domestic and wild canids described in the literature, although peculiar characteristics of L. gymnocercus have been found.(AU)
Assuntos
Animais , Osso e Ossos/anatomia & histologia , Canidae/anatomia & histologia , Extremidade Superior/anatomia & histologia , Sistema Musculoesquelético/anatomia & histologia , Radiografia Torácica/veterináriaRESUMO
O membro torácico é a parte do esqueleto pós-craniano que mais informações oferece sobre a locomoção e hábitos de vida de uma espécie. Objetivou-se realizar uma descrição macroscópica, comparativa, radiográfica e osteométrica do esqueleto do membro torácico de Lycalopex gymnocercus. Para tal foram analisados ossos de 24 espécimes adultos coletados mortos em rodovias. Foram realizadas descrições macroscópicas e comparadas com as de outros canídeos, imagens radiográficas para reconhecimento dos padrões de trabeculação e topografia óssea, mensurações lineares e tridimensionais e avaliações histológicas das clavículas. O esqueleto do membro torácico de L. gymnocercus apresentou adaptações morfofuncionais em todos os segmentos para a locomoção cursorial especializada e alguma capacidade de pronação e supinação para captura de presas de porte menor. Houve uma tendência de os ossos serem maiores nos machos, especialmente na região distal do úmero, presumivelmente para a fixação de músculos antebraquiais mais fortes. A clavícula vestigial foi encontrada em todos os espécimes, teve natureza predominantemente cartilagínea e foi significativamente maior nos machos. A conformação básica do esqueleto do membro torácico foi semelhante à dos canídeos domésticos e silvestres descritos na literatura, ainda que particularidades de L. gymnocercus sejam encontradas.(AU)
The forelimb is the part of the post-cranial skeleton that provides more information about locomotion and life habits of a species. The objective of this study was to perform a detailed macroscopic, comparative, radiographic and osteometric investigation of the thoracic limb of Lycalopex gymnocercus. Twenty-four adult specimens collected dead from roadkill were studied. Analysis included macroscopic and comparative descriptions to other canids, radiographic images for recognition of trabeculation patterns and topographical arrangement of bones, linear and three-dimensional measurements, and histological evaluation of the clavicles. The forelimb skeleton of L. gymnocercus presented morphological and functional adaptations in every segment for a specialized cursorial locomotion and some ability to pronation and supination for capture of small vertebrates. There was a tendency for the bones to be longer in males, especially in the distal end of humerus, presumably to fixation of stronger antebrachial muscles. The vestigial clavicle bone was found in all the specimens, had a predominantly cartilaginous nature and was significantly larger in males. The basic conformation of the forelimb skeleton was similar to that of domestic and wild canids described in the literature, although peculiar characteristics of L. gymnocercus have been found.(AU)
Assuntos
Animais , Osso e Ossos/anatomia & histologia , Canidae/anatomia & histologia , Extremidade Superior/anatomia & histologia , Sistema Musculoesquelético/anatomia & histologia , Radiografia Torácica/veterináriaRESUMO
ABSTRACT: The forelimb is the part of the post-cranial skeleton that provides more information about locomotion and life habits of a species. The objective of this study was to perform a detailed macroscopic, comparative, radiographic and osteometric investigation of the thoracic limb of Lycalopex gymnocercus. Twenty-four adult specimens collected dead from roadkill were studied. Analysis included macroscopic and comparative descriptions to other canids, radiographic images for recognition of trabeculation patterns and topographical arrangement of bones, linear and three-dimensional measurements, and histological evaluation of the clavicles. The forelimb skeleton of L. gymnocercus presented morphological and functional adaptations in every segment for a specialized cursorial locomotion and some ability to pronation and supination for capture of small vertebrates. There was a tendency for the bones to be longer in males, especially in the distal end of humerus, presumably to fixation of stronger antebrachial muscles. The vestigial clavicle bone was found in all the specimens, had a predominantly cartilaginous nature and was significantly larger in males. The basic conformation of the forelimb skeleton was similar to that of domestic and wild canids described in the literature, although peculiar characteristics of L. gymnocercus have been found.
RESUMO: O membro torácico é a parte do esqueleto pós-craniano que mais informações oferece sobre a locomoção e hábitos de vida de uma espécie. Objetivou-se realizar uma descrição macroscópica, comparativa, radiográfica e osteométrica do esqueleto do membro torácico de Lycalopex gymnocercus. Para tal foram analisados ossos de 24 espécimes adultos coletados mortos em rodovias. Foram realizadas descrições macroscópicas e comparadas com as de outros canídeos, imagens radiográficas para reconhecimento dos padrões de trabeculação e topografia óssea, mensurações lineares e tridimensionais e avaliações histológicas das clavículas. O esqueleto do membro torácico de L. gymnocercus apresentou adaptações morfofuncionais em todos os segmentos para a locomoção cursorial especializada e alguma capacidade de pronação e supinação para captura de presas de porte menor. Houve uma tendência de os ossos serem maiores nos machos, especialmente na região distal do úmero, presumivelmente para a fixação de músculos antebraquiais mais fortes. A clavícula vestigial foi encontrada em todos os espécimes, teve natureza predominantemente cartilagínea e foi significativamente maior nos machos. A conformação básica do esqueleto do membro torácico foi semelhante à dos canídeos domésticos e silvestres descritos na literatura, ainda que particularidades de L. gymnocercus sejam encontradas.