RESUMO

Recently, fish consumption has been increasing; subsequently, the number of by-products has also increased. However, generated residues are frequently discarded, and an appropriate management is necessary to properly use all fish by-products. Fishery by-products are well known for their content of bioactive compounds, such as unsaturated fatty acids, amino acids, minerals, peptides, enzymes, gelatin, collagen, and chitin. Several studies have reported that fishery by-products could provide significant properties, including antioxidant, antihypertensive, antimicrobial, anti-inflammatory, and antiobesity. Consequently, fish discards are of considerable interest to different industrial sectors, including food, nutraceuticals, medical, and pharmacology. In the food industry, the interest in using fishery by-products is focused on hydrolysates as food additives, collagen and gelatin as protein sources, chitin and chitosan to form edible films to protect food during storage, and oils as a source of Omega-3 and useful as antioxidants. Although different studies reported good results with the use of these by-products, identifying new applications in the food sector, as well as industrial applications, remains necessary.

RESUMO

Arthrospira maxima is a microalga that has been collected in Lake Texcoco in the Valley of Mexico since pre-Hispanic times and has been a traditional food source due to its high biomass production and protein content (50-60 %), making it promising for protein extraction. In this context, a protein isolate was obtained from powdered biomass of Arthrospira maxima (PbAm) by alkaline solubilization (pH 11) and isoelectric precipitation (pH 4.2). Arthrospira maxima protein isolate (AmPI) presented higher protein content (82.58 %) and total amino acids compared to PbAm. Functional properties of AmPI were evaluated in comparison with PbAm and soy protein isolate (SPI). Protein extraction resulted in a significant increase in protein solubility (PS) and foaming capacity (FC) of up to 87.78 % and 238.10 %, respectively. Emulsifying capacity (EC) of AmPI was superior to that of PbAm and SPI in pH range 5-7. Inclusion of AmPI as a partial substitute for SPI in the formulation of meat sausages was evaluated by implementing four treatments: T1 (15 % AmPI, 85 % SPI), T2 (10 % AmPI, 90 % SPI), T3 (5 % AmPI, 95 % SPI) and T4 (0 % AmPI, 100 % SPI). Although the texture attributes remained unchanged, a significant reduction in color parameters was observed as the concentration of AmPI increased. An inclusion of 15 % AmPI significantly enhanced the nutritional quality of meat sausages. Results highlight the excellent properties of AmPI, confirming Arthrospira maxima as a promising protein source in the food industry.

RESUMO

The present study aimed to investigate the properties of calcium-rich soy protein isolate (SPI) gels (14% SPI; 100 mM CaCl2), the effects of incorporating different concentrations locust bean gum (LBG) (0.1-0.3%, w/v) to the systems and the stability of the obtained gels. Also, the incorporation of solid lipid microparticles (SLMs) was tested as an alternative strategy to improve the system's stability and, therefore, potential to be applied as a product prototype. The gels were evaluated regarding their visual aspect, rheological properties, water-holding capacities (WHCs) and microstructural organizations. The CaCl2-induced gels were self-supported but presented low WHC (40.0% ± 2.2) which was improved by LBG incorporation. The obtained mixed system, however, presented low stability, with high syneresis after 10 days of storage, due to microstructural compaction. The gels' stability was improved by SLM incorporation, which decreased the gelled matrices' compaction and syneresis for more than 20 days. Even though the rheological properties of the emulsion-filled gels (EFGs) were very altered due to the ageing process (which may affect the sensory perception of a future food originated from this EFG), the incorporation of SLMs increased the systems potential to be applied as a calcium-rich product prototype.

RESUMO

The obtained seeds from fruit processing are considered by-products containing proteins that could be utilized as ingredients in food manufacturing. However, in the specific case of soursop seeds, their usage for the preparation of protein isolates is limited. In this investigation a protein isolate from soursop seeds (SSPI) was obtained by alkaline extraction and isoelectric precipitation methods. The SSPI was sonicated at 200, 400 and 600 W during 15 and 30 min and its effect on the physicochemical, functional, biochemical, and structural properties was evaluated. Ultrasound increased (p < 0.05) up to 5 % protein content, 261 % protein solubility, 60.7 % foaming capacity, 30.2 % foaming stability, 86 % emulsifying activity index, 4.1 % emulsifying stability index, 85.4 % in vitro protein digestibility, 423.4 % albumin content, 83 % total sulfhydryl content, 316 % free sulfhydryl content, 236 % α-helix, 46 % ß-sheet, and 43 % ß-turn of SSPI, in comparison with the control treatment without ultrasound. Furthermore, ultrasound decreased (p < 0.05) up to 50 % particle size, 37 % molecular flexibility, 68 % surface hydrophobicity, 41 % intrinsic florescence spectrum, and 60 % random coil content. Scanning electron microscopy analysis revealed smooth structures of the SSPI with molecular weights ranging from 12 kDa to 65 kDa. The increase of albumins content in the SSPI by ultrasound was highly correlated (r = 0.962; p < 0.01) with the protein solubility. Improving the physicochemical, functional, biochemical and structural properties of SSPI by ultrasound could contribute to its utilization as ingredient in food industry.

Assuntos

RESUMO

This study focused on studying the bioaccesible phenolic compounds (PCs) from yellow pea flour (F) and protein isolate (I). Total phenolic contents (TPC), PCs composition and antioxidant activities were analysed in ethanol 60% extracts obtained by applying ultrasound assisted extraction (UAE, 15 min/40% amplitude). The preparation of I under alkaline conditions and the elimination of some soluble components at lower pH produced a change of PCs profile and antioxidant activity. After simulated gastrointestinal digestion (SGID) of both ingredients to obtain the digests FD and ID, notable changes in the PCs concentration and profiles could be demonstrated. FD presented a higher ORAC activity than ID (IC50 = 0.022 and 0.039 mg GAE/g dm, respectively), but lower ABTS•+ activity (IC50 = 0.8 and 0.3 mg GAE/g dm, respectively). After treatment with cholestyramine of extracts from FD and ID in order to eliminate bile salts and obtain the bioaccesible fractions FDb and IDb, ROS scavenging in H2O2-induced Caco2-TC7 cells was evaluated, registering a greater activity for ID respect to FD (IC50 = 0.042 and 0.017 mg GAE/mL, respectively). These activities could be attributed to the major bioaccesible PCs: OH-tyrosol, polydatin, trans-resveratrol, rutin, (-)-epicatechin and (-)-gallocatechin gallate for FD; syringic (the most concentrated) and ellagic acids, trans-resveratrol, and (-)-gallocatechin gallate for ID, but probably other compounds such as peptides or amino acids can also contribute.

Assuntos

RESUMO

Asparagus production generates significant amounts of by-products during the summer and post-harvest growth period. By-products can be good sources of nutrients and phytochemicals. The interest in increasing the availability of proteins for human consumption has led to the use of new plant sources rich in proteins. The objective of this study was to use response surface methodology (RSM) to optimize the aqueous extraction process of proteins from asparagus leafy by-products, for the production of new protein ingredients. The optimum extraction condition was at pH 9, with 40 min of extraction at 50 °C, and the concentration was fixed at 5 g·L-1. The isolate obtained presented 90.48% protein with 43.47% protein yield. Amino acids such as alanine, proline, valine, leucine/isoleucine, asparagine, and phenylalanine were identified, and the antioxidant activity for 2,2 AZINO BIS (3-ethylbenzo thiazoline 6 sulfonic acid diammonium salt) was 145.76 equivalent to Trolox µmol.100g-1 and for DPPH 65.21 equivalent to Trolox µmol.100g-1. The product presented favorable technological properties (water absorption capacity 4.49 g·g-1 and oil absorption capacity 3.47 g·g-1) and the color tended towards dark green (L* 31.91, a* -1.01, b* -2.11). The protein isolate obtained through the extraction optimization process showed high potential to be used as a protein ingredient.

RESUMO

A fruit leather (apple and acáchul berry) oriented toward women of reproductive age was developed. The snack was supplemented with an ingredient composed of folic acid (FA) and whey proteins (WPI) to ensure the required vitamin intake to prevent fetal neural tube defects. In order to generate a low-calorie snack, alternative sweeteners were used (stevia and maltitol). The fruit leather composition was determined. Also, an in vitro digestion process was carried out to evaluate the bioaccessibility of compounds with antioxidant capacity (AC), total polyphenols (TPCs), total monomeric anthocyanins (ACY), and FA. The quantification of FA was conducted by a microbiological method and by HPLC. The leather contained carbohydrates (70%) and antioxidant compounds, mainly from fruits. Bioaccessibility was high for AC (50%) and TPCs (90%), and low for ACY (17%). Regarding FA, bioaccessibility was higher for WPI-FA (50%) than for FA alone (37%), suggesting that WPI effectively protected the vitamin from processing and digestion. Furthermore, the product was shown to be non-cytotoxic in a Caco-2 cell model. The developed snack is an interesting option due to its low energy intake, no added sugar, and high content of bioactive compounds. Also, the supplementation with WPI-FA improved the conservation and bioaccessibility of FA.

RESUMO

Canola (Brassica napus L.) meal represents a prominent alternative plant-based source for protein isolation. This work aimed to investigate the combined effect of extraction and purification methods for the production of canola protein isolates (CPIs). CPIs were characterized in terms of process yield, protein recovery, basic composition, amino acid profile, in vitro protein digestibility, techno-functional properties, structural properties, and molecular features. The results showed that the Alk-Uf method enhanced yield (16.23 %) and protein recovery (34.88 %). Meanwhile, the Et-Alk-Uf method exhibited the highest crude protein (89.71 %) and free amino nitrogen (4.34 mg g protein-1) contents. Furthermore, protein digestibility (95.5 %) and protein digestibility corrected amino acid score (1.0) were improved using the Et-Alk-Ac method. Conversely, the amino acid composition, secondary structure, and electrophoretic profiles were generally similar for all CPIs. The Alk-Uf and Et-Alk-Uf methods produced isolates with the highest water solubility (∼39.18 %), water absorption capacity (∼3.86 g water g protein-1), oil absorption capacity (∼2.77 g oil g protein-1), and foaming capacity (∼505.26 %). Finally, the foaming stability (93.75 %) and foaming density (34.38 %) were increased when employing the Alk-Ac method. These findings suggest that, in general, the Alk-Uf and Et-Alk-Uf methods can be used to obtain CPIs with high added value for use in food formulations.

RESUMO

Encapsulation techniques are generally used to preserve the volatile compounds of essential oils. This study aimed to evaluate the influence of process variables on the microencapsulation of marjoram essential oil (MEO) (Origanum majorana L.) by ionic gelation. The effect of sodium alginate concentration (0.5-2 g/100 mL), emulsifier concentration (0.5-2 g/100 mL whey protein isolate (WPI)), and cationic bath concentration (0.05-0.3 mol/L CaCl2) on the emulsions and beads properties were investigated, according to a rotatable central composite design. MEO chemical composition and antimicrobial activity were assessed. Emulsions were characterized for droplet size and viscosity, while the particles were analyzed for encapsulation efficiency, size and circularity, and morphology. High concentrations of alginate and WPI intensified the porous structure of the beads, reducing droplet mean diameter and encapsulation efficiency. High alginate concentrations also increased emulsion viscosity, affecting positively beads' circularity. The intermediate concentration of sodium alginate (1.25 g/100 mL), WPI (1.25 g/100 mL), and CaCl2 (0.175 mol/L) were selected as the most appropriate conditions to produce beads with satisfactory circularity and high encapsulation efficiency.

Assuntos

RESUMO

INTRODUCCIÓN: Los deportistas y las personas activas que entrenan la fuerza para lograr un aumento de su masa muscular tienen requerimientos calóricos y proteicos aumentados, por esta razón emplean diversas estrategias como la suplementación con proteína whey aislada y aminoácidos aislados como la leucina después del entrenamiento sustentados en la premisa de que promueven el incremento en la síntesis de proteínas musculares, y por ende un aumento de la masa magra. OBJETIVO: Comparar cambios de la composición corporal aplicando el método de Absorciometría Dual de Rayos X (DEXA) en personas físicamente activas expuestas a un programa de entrenamiento de la fuerza con la suplementación de proteína whey aislada y/o leucina durante 12 semanas. METODOLOGÍA: estudio aleatorizado prospectivo longitudinal en un grupo de 10 varones físicamente activos, los cuales fueron asignados al azar en 3 grupos de suplementación con proteína whey aislada, leucina o la mezcla de ambas bajo el mismo protocolo de entrenamiento de la fuerza. Se evaluó la composición corporal en 3 momentos: semana 0, semana 6 y semana 12 de la intervención. RESULTADOS: En las condiciones evaluadas no se observaron cambios estadísticamente significativos de las variables de composición corporal y fuerza en los diferentes protocolos de suplementación: leucina, proteína whey aislada con leucina y proteína whey aislada. CONCLUSIONES: Se observaron resultados superiores de la masa magra y la fuerza en el grupo de la suplementación de proteína whey aislada con leucina con respecto a los demás grupos, cabe aclarar que por el tamaño de muestra no alcanzó a ser estadísticamente significativo.

INTRODUCTION: Athletes and active people who work hard to increase their muscle mass have increased caloric and protein requirements. For this reason, they use different strategies such as whey protein isolate supplementation and/or branched-chain amino acids after sustained training on the premise that they promote an increase in muscle protein synthesis, and therefore an increase in lean mass. OBJECTIVE: To compare body composition changes in physically active people exposed to a strength training program withwhey protein isolate and/or leucine supplementation for 12 weeks. METHODS: Longitudinal prospective randomized study in a group of 10 physically active males, which were randomly assigned to 3 supplementation groups with whey protein isolate, leucine, or a mixture of both, under the same strength training protocol. Body composition was evaluated in 3 moments: week 0, week 6 and week 12 of the intervention. RESULTS: In the evaluated conditions, no statistically significant changes were observed in the variables of body composition and strength based on the different supplementation protocols: Leucine, protein with leucine and protein. CONCLUSIONS: Compared with the other groups, higher results were observed in lean mass and strength in group using the whey protein isolate supplementation with leucine. It should be noted that due to the size of the sample, the difference was not statistically significant.

Assuntos