RESUMO

BACKGROUND: The literature is unclear about how the different attachment systems for overdentures impact the maximum bite force, the masticatory efficiency and how this impact in the oral health self-perception in patients. OBJECTIVE: To evaluate the effect of two attachment systems (O-ring and Locator) for mandibular overdenture using single implant on quality of life, maximum bite force (BF) and masticatory efficiency (ME). METHODS: Twenty-eight completely edentulous denture wearers with a mandibular symphysis implant were randomly selected and allocated into two groups in a crossover study, considering O-ring and Locator attachment types. The quality of life and self-perception of oral health were assessed using the Oral Health Impact Profile (OHIP-Edent) and Geriatric Index of Determination of Oral Health (GOHAI) questionnaires, respectively. BF was measured using a gnathodynamometer and ME by chewing silicone cubes and almonds in different numbers of cycles. RESULTS: There was no difference between the attachment systems about self-perceived oral health and impact on quality of life (p > .05). The O-ring-type system obtained a significantly higher BF than the locator-type system (p = .04). Regardless of the food chewed, no statistically significant difference was observed with the type of attachment (p > .05). The ME was directly proportional to the masticatory cycles only for almonds (p < .01). CONCLUSIONS: Locator and O-ring inserts had a similar impact on patients' quality of life, self-perception of oral health and ME. Additionally, the O-ring system exhibited superior properties in the BF.

RESUMO

PURPOSE: To evaluate the intramucosal retention system in patients' masticatory efficiency and quality of life in this case series. MATERIAL AND METHODS: A total of 3 individuals with maxillectomy were included for rehabilitation with a complete obturator prostheses with an intramucosal retention system (OPI). The complete obturator prostheses was made for 60 days, and electromyography assessments and bite force were applied before, after 30, 60, and 90 days of surgery and prostheses installation. The University of Washington Quality of Life Questionnaire (UW-QoL) and the Obturator Functional Scale (OFS) were also administered at baseline and in the same follow-up periods. The electromyography was evaluated on both sides of the masseter, temporalis, and buccinator muscles while chewing hard and soft food. The maximum bite force was recorded in the central incisors and both sides of the first molar region. RESULTS: Bite force values increased in the first molar region, and muscular electrical activity remained constant. Items related to the taste and swallowing of the UW-QOL impacted. Most OFS questionnaire data responses indicated that patients improved in swallowing liquid foods and appearance. CONCLUSIONS: The rehabilitative capacity improves masticatory efficiency and QoL in adults maxilectomized and rehabilitated with OPI analysis in the study. Further clinical studies should be encouraged to determine the effectiveness of this retentive system.

RESUMO

This systematic review answers the question: "Does occlusal appliance use influence masticatory muscle function of dentate individuals with sleep bruxism?". The literature search included six databases, grey literature, and manual search for articles. Randomized and non-randomized clinical trials were included comparing muscle function of sleep bruxers before and after receiving occlusal appliances. Risk of bias was assessed with risk of bias assessment for randomized and non-randomized clinical trials tool. Twelve studies, three represent randomized clinical trials, were included. Risk of bias was considered low, moderate, or serious. Meta-analyses indicated that soft and hard appliances did not influence muscle activity and bite force of bruxers. Qualitative analysis showed that occlusal appliance use did not influence masticatory performance and muscle volume. However, it was effective in reducing tongue force. Certainty of evidence was considered very low for muscle activity when evaluated with hard appliances, and for bite force evaluated with both appliance materials. Low certainty of evidence was observed for muscle activity with soft appliances. Based on the findings of this meta-analysis, occlusal appliances do not affect masticatory muscle function of sleep bruxers. Regardless of appliance material, the activity of masseter and temporal, and bite force of sleep bruxers was not influenced.

Assuntos

RESUMO

OBJECTIVE: The prevalence of obesity is increasing significantly worldwide, raising great concern among health professionals. This observational study evaluated the electromyographic activity and thickness of the masseter and temporalis muscles, in addition to the maximum molar bite force, in obese and eutrophic subjects. METHODS: Sixty subjects were divided into three groups: I (7-12 years), II (13-20 years), III (21-40 years) and sex: with 10 men and 10 women for each group. Electromyographic recordings of the masticatory muscles were obtained during mandibular tasks. The masticatory muscles thicknesses were obtained at rest and during dental clenching. The maximum molar bite forces were measured on the right and left sides. The difference in outcome measures between the groups and sex was analyzed using Mann-Whitney U test (p < 0.05) and analysis of covariance (ANCOVA). RESULTS: Electromyographic activity in the masseter and temporal muscles consistently displayed lower levels in obese subjects of both sexes across all three age groups during mandibular tasks. Additionally, greater thickness of the masticatory muscles was observed in obese subjects of both sexes across all three age groups. Obese women in Group II displayed higher values of molar bite force, both on the right and left sides, compared to eutrophic women. On the other hand, women in Group III exhibited higher values of molar bite force on the right side in comparison to eutrophic women. CONCLUSIONS: This study underscores the potential impact of obesity on the morphofunctional aspects of the stomatognathic system in subjects aged 7 to 40 years.

Assuntos

RESUMO

ABSTRACT Purpose This study aimed to investigate three-dimensional facial soft tissue dimensions, maximum bite force (MBF), and occlusal contact area in patients with DFD. In addition, we analyzed the relationship between MBF and the three-dimensional facial measurements. Methods Thirty-two patients with skeletal Class III DFD and 20 patients with Class II DFD underwent a soft tissue evaluation using surface laser scanning, as well as MBF and occlusal contact area assessments. The DFD groups were compared with each other and with 25 healthy subjects. Results Significant morphological differences were found in the transversal, vertical, and anteroposterior dimensions between Class II DFD and Class III DFD. Both DFD groups presented an increased linear distance of chin height, which was strongly related with decreased MBF magnitude. The DFD groups exhibited lower MBF and occlusal contact area, with no significant differences between Class II and Class III DFD. Conclusion The presence of DFD affected 3D measurements of facial soft tissue, causing variations beyond normal limits, lower MBF, and occlusal contact area in both Class II and Class III DFD patients. The vertical dimension might have influenced the lower MBF magnitude in the studied skeletal deformities.

RESUMO

The presence of myofascial trigger points in the masticatory muscles can lead to pain and may be related to temporomandibular dysfunction. The dry needling technique (DN) is employed for mechanical disruption and deactivation of trigger points in skeletal muscles. The purpose of this observational longitudinal clinical study was to determine the morphofunctional capacity of the masseter and temporalis muscles, and bite force in patients with temporomandibular disorders of muscular origin after DN of the masseter muscle. Twenty-one patients with the presence of trigger points in the masseter muscle were selected. Electromyographic activity of the masseter and temporalis muscles was assessed during the mandibular tasks of rest, protrusion, right and left laterality, and maximal voluntary contraction (MVC). Muscle thickness at rest and dental clenching at MVC was measured with ultrasound. Molar bite force (right and left) was analyzed with a digital dynamometer. Patients were evaluated before and seven days after intervention with DN. Data were subject to the paired t test for dependent samples (p<0.05). There was significant difference in the left masseter muscle in right laterality (p=0.01), right temporalis muscle thickness in MVC (p=0.05), and right (p=0.01) and left (p=0.008) molar bite force, after DN. The authors suggest that DN was efficient in the positive changes in the morphofunctional performance of the stomatognathic system. (AU)

A presença de pontos gatilhos miofasciais nos músculos mastigatórios pode gerar dor e estar relacionada à disfunção temporomandibular. A técnica de agulhamento a seco (AS) é utilizada para rompimento mecânico e desativação do ponto gatilho nos músculos esqueléticos. O objetivo deste estudo clínico longitudinal observacional foi determinar a capacidade morfofuncional dos músculos masseter e temporal, bem como a força de mordida, em pacientes com distúrbios temporomandibulares de origem muscular após AS no músculo masseter. Foram selecionados vinte e um pacientes com presença de pontos de gatilho no músculo masseter. A atividade eletromiográfica dos músculos masseter e temporal foi avaliada durante tarefas mandibulares de repouso, protrusão, lateralidade direita e esquerda, e contração voluntária máxima (CVM). A espessura muscular em repouso e a contração dental na CVM foram medidas por ultrassom. A força de mordida molar (direita e esquerda) foi analisada com um dinamômetro digital. Os pacientes foram avaliados antes e sete dias após a intervenção com DN. Os dados foram submetidos ao teste t pareado para amostras dependentes (p<0,05). Houve diferença significante no músculo masseter esquerdo na lateralidade direita (p=0,01), espessura do músculo temporal direito na CVM (p=0,05) e força de mordida molar direita (p=0,01) e esquerda (p=0,008), após AS. Os autores sugerem que o AS foi eficaz nas alterações positivas no desempenho morfofuncional do sistema estomatognático. (AU)

RESUMO

BACKGROUND: The literature is unclear about bite force (BF) and handgrip force (HF) in a specific group of different ages and dentate conditions, or even a predictive model for each specific group, using BF and HF as factors. OBJECTIVE: To establish the correlation between HF and BF in female participants with distinct ages and dentate conditions; also create a predictive model of BF as a function of HF. METHODS: Participants were divided into three groups (GI: young natural dentate women, n = 65; GII: adult natural dentate women, n = 67; and GIII: edentulous women users of bimaxillary complete dentures, n = 67) and subjected to an HF measurement test using a digital dynamometer. Subsequently, BF was measured using a digital gnathodynamometer in the molar region. Pearson correlation coefficient (r) and multivariate analysis of variance (α = 0.05) were performed, and simple linear regression was used to obtain a model to predict BF from HF for each group separately (α = 0.05). RESULTS: All groups presented moderate and strong correlations among the variables (GI: r = 0.838; GII: r = 0.714; GIII: r = 0.646). A significant difference in BF was observed (GI > GII > GIII; p < .05). GIII presented a significantly lower HF than the other groups (p < .05). Besides, three equations predicting BF, using HF, were obtained for use in young/adult dentate and edentulous women. CONCLUSION: All groups found a positive and significant correlation between BF, HF and groups. HF can be a simple and efficient method for predicting BF using the predictive models developed for women with good health.

Assuntos

RESUMO

Objetive: To investigate the maximum molar bite force in women with chronic neck pain after treatment with acupuncture. Materials and Methods: Twenty-three women with chronic neck pain participated. Dynamometer was used to measure the right and left maximum molar bite force. Dong Bang acupuncture needles - 0.25 mm x 30 mm was inserted into the integumentary tissue. Treatment was 10 sessions, each 30 minutes long and twice a week. Results: The right (p = 0.01) and left (p = 0.004) molar bite force was assessed after treatment with acupuncture, and showed increased occlusal strength. Conclusions: This study suggests a functional improvement in the stomatognathic system in women with chronic cervical pain after treatment with acupuncture. However, it is important to note that further research is needed to fully elucidate the long-term effects and potential clinical implications of these findings in the field of pain management and rehabilitation.

Objetivo: Investigar la fuerza masticatoria máxima en mujeres con dolor crónico de cuello después del tratamiento con acupuntura. Materiales y Métodos: Participaron veintitrés mujeres con dolor crónico de cuello. Se utilizó un dinamómetro para medir la fuerza máxima de mordida del molar derecho e izquierdo. Agujas de acupuntura Dong Bang se insertaron 0,25 mm x 30 mm en el tejido tegumentario. El tratamiento fue de 10 sesiones, cada una de 30 minutos de duración, dos veces por semana. Resultados: Se observó la fuerza de mordida del molar derecho (p=0.01) e izquierdo (p=0.004) después del tratamiento con acupuntura, que mostró un aumento de la fuerza oclusal. Conclusión: Este estudio sugiere una mejora funcional en el sistema estomatognático en mujeres con dolor cervical crónico después del tratamiento con acupuntura. Sin embargo, es importante señalar que se necesita más investigación para dilucidar por completo los efectos a largo plazo y las posibles implicaciones clínicas de estos hallazgos en el campo del tratamiento y la rehabilitación del dolor.

Assuntos

RESUMO

Purpose: The current study aims to evaluate bite force, perception of orofacial pain, and treatment satisfaction of patients with bruxism using two protocols of botulinum toxin A (BTX-A) injections. Material and Methods: Two groups of patients seeking bruxism treatment and presenting bilateral orofacial pain of muscle origin were randomly created according to BTX-A injection sites: masseter muscle only, bilaterally (3 points in each muscle, 10 U per point), and masseter and temporal muscles (3 points in each masseter muscle and 2 points in each temporal muscle, 10 U per point). The patients were evaluated preoperatively and longitudinally at 15, 90, 120, and 180 days by the use of visual analog scales for pain and treatment satisfaction and a gnathodynamometer for bite force recording. Results: The final sample included 10 participants in each group. Both groups presented mitigation of pain at 15, 90, 120, and 180 days in comparison with baseline; however, reduction in the posterior bite force was noted only at 15, 90, and 120 days. Quite high treatment satisfaction was reported from both groups at 15, 90, 120, and 180 days. No differences were observed between the groups in all evaluations and study periods. Conclusion: In general, considering pain relief, reduction in bite force, and treatment satisfaction, both protocols of BTX-A seem to be somewhat equally effective in the short-term management (up to 120 days) of bruxism.

RESUMO

OBJECTIVE: Present a gnathodynamometer design that increases patient comfort, precision, and/or ease for the operator during bite force tests. MATERIALS AND METHODS: A bite tip capable of pivoting 180° was tested on senior dental students in a double-blind trial. The tests were performed in teeth 11 and 16 with the bite tip on the long axis of the clamp and at an angle of 90° to the clamp. The sample was composed of 24 students, 13 males and 11 females, randomly divided into two groups: the operator group (OP), which was composed of 12 students, 7 males and 5 females, and the test group (TI), which was composed of 12 students, 6 males and 6 females. The operator and participants were asked to evaluate comfort and precision/ease in positioning the bite tip by attributing scores from 0 (total discomfort) to 10 (total comfort) during the test. RESULTS: No difference was noted in tooth 11 (P > 0.05). In tooth 16, there was a statistically significant improvement (P < 0.01) for the participants tested and the operator using the pivoting bite tip. CONCLUSIONS: The pivoting bite tip showed no difference in the comfort of the participants and operator precision when testing incisors; however, the tip showed a difference for both conditions in the molar region. The gnathodynamometer geometry showed good results in participant comfort and operator precision when used in bite force tests of the incisors and molars. Further investigations are needed to confirm whether these improvements influence the mean value and maximum bite force measurement. CLINICAL RELEVANCE: Bite force measurement is a method for obtaining important data to check the functional conditions of the stomatognathic system. With the aging of the world population, it has become important to check the quality of life during aging. The pivoting bite tip improves the comfort and precision of bite tests for the participants tested and for the operator, respectively.

Assuntos