RESUMO

RESUMEN Objetivo: Realizar una revisión de la literatura sobre el resultado de las sobredentaduras maxilares según el número de implantes dentales en pacientes edéntulos totales. Materiales y Métodos: Se realizó una búsqueda bibliográfica sistematizada en los motores de búsqueda Pubmed, Scopus y Web of Science y luego de establecer los criterios y filtros de la misma, se utilizaron 6 artículos. De los 6 artículos analizados, 4 fueron estudios de tipo ensayo clínico aleatorizado, 1 estudio prospectivo y 1 estudio retrospectivo. Resultados: Los resultados clínicos de las sobredentaduras maxilares, basados en el número de implantes sobre los cuales fueron soportadas, y comparando los protocolos más difundidos e investigados como los de All-on-4 y All-on-6, fueron similares. Se consideran óptimos, confiables, exitosos y longevos, sin diferencia significativa según el número de implantes dentales colocados. Conclusiones: Las sobredentaduras maxilares soportadas por 4 o 6 implantes fueron técnicas de tratamiento confiables, y ofrecen resultados comparables. Las complicaciones fueron limitadas y los resultados óptimos y duraderos.

ABSTRACT Objective: To review the literature on the outcome of maxillary overdentures according to the number of dental implants in edentulous patients. Materials and Methods: A systematic bibliographic search was carried out in the Pubmed, Scopus and Web of Science search engines and, after appliying the criteria and filters, 6 articles were used. Of the 6 articles analyzed, 4 were randomized clinical trial type studies, 1 prospective study and 1 retrospective study. Results: The results of maxillary overdentures, according to the number of implants used to support them, and comparing the most widespread and researched protocols such as All-on-4 and All-on-6, were similar. They are considered optimal, reliable, successful and long-lived, with no significant difference within the number of dental implants placed. Conclusions: Maxillary overdentures supported by 4 or 6 implants were reliable, and exhibit comparable results. The complications were limited, and the results were optimal and enduring.

Assuntos

RESUMO

Objetivo: Realizar una revisión de la literatura sobre el resultado de las sobredentaduras maxilares según el número de implantes dentales en pacientes edéntulos totales. Materiales y Métodos: Se realizó una búsqueda bibliográfica sistematizada en los motores de búsqueda Pubmed, Scopus y Web of Science y luego de establecer los criterios y filtros de la misma, se utilizaron 6 artículos. De los 6 artículos analizados, 4 fueron estudios de tipo ensayo clínico aleatorizado, 1 estudio prospectivo y 1 estudio retrospectivo. Resultados: Los resultados clínicos de las sobredentaduras maxilares, basados en el número de implantes sobre los cuales fueron soportadas, y comparando los protocolos más difundidos e investigados como los de All-on-4 y All-on-6, fueron similares. Se consideran óptimos, confiables, exitosos y longevos, sin diferencia significativa según el número de implantes dentales colocados. Conclusiones: Las sobredentaduras maxilares soportadas por 4 o 6 implantes fueron técnicas de tratamiento confiables, y ofrecen resultados comparables. Las complicaciones fueron limitadas y los resultados óptimos y duraderos.

Objective: To review the literature on the outcome of maxillary overdentures according to the number of dental implants in edentulous patients. Materials and Methods: A systematic bibliographic search was carried out in the Pubmed, Scopus and Web of Science search engines and, after appliying the criteria and filters, 6 articles were used. Of the 6 articles analyzed, 4 were randomized clinical trial type studies, 1 prospective study and 1 retrospective study. Results: The results of maxillary overdentures, according to the number of implants used to support them, and comparing the most widespread and researched protocols such as All-on-4 and All-on-6, were similar. They are considered optimal, reliable, successful and long-lived, with no significant difference within the number of dental implants placed. Conclusions: Maxillary overdentures supported by 4 or 6 implants were reliable, and exhibit comparable results. The complications were limited, and the results were optimal and enduring.

Assuntos

RESUMO

The goal of this clinical report was to present an alternative to traditional flat bone reduction guides, using a custom-designed 3-dimensional (3D)-printed guide according to the future gingival margin of the planned dentition. A 61-year-old woman with concerns regarding her smile appearance was presented. The initial examination revealed excessive gingival show accompanied by excessive overjet. The dentition was in a failing situation. The proposed treatment plan, relying on the sufficient amount of bone and keratinized tissue, consisted of recontouring of the alveolar ridge and gingiva and placement of 6 implants and an FP-1 prosthesis after extraction of all remaining maxillary teeth. Digital smile design was completed, and a fully digitally guided surgery was planned. This consisted of using 3 surgical guides, starting with the fixation pin guide, continuing with the scalloped hard- and soft-tissue reduction guide, and finally the implant placement template. Following the surgery, the patient received a temporary restoration, and on the 4-month follow-up, a new polymethyl meta-acrylate temporary prosthesis was delivered. The patient's 7-month follow-up is presented in the article. The report of this triple-template guided surgery indicated that digital 3D planning is a considerably predictable tool to properly establish and evaluate future occlusal plane, smile line, and lip support. Scalloped guides seem to be an excellent alternative to conventional bone reduction guides since they require less bone removal and improve patient comfort during surgery.

Assuntos

RESUMO

OBJECTIVES: To evaluate the trueness of the digital maxillary occlusal records in comparison with the conventional records for the fabrication of complete-arch implant-supported fixed prostheses. MATERIALS AND METHODS: This randomized controlled clinical trial followed the recommendations of the CONSORT statement. Twenty participants who used a mandibular interim complete-arch fixed prosthesis and conventional complete maxillary dentures were included in the study. The participants were randomized into two types of maxillary occlusal records: conventional (COR) and digital (DOR) (TRIOS; Shape A/S). After fabricating the prostheses, the distribution and number of occlusal contact points, and the time taken to obtain the maxillary occlusal record and work model were evaluated. Descriptive analysis was used to evaluate the distribution of occlusal contact points. The Wilcoxon test was employed for assessing the number of occlusal contact points, while the Mann-Whitney U test was used for the time taken to obtain the working casts and the maxillary occlusal record and occlusal adjustment times (p < 0.05). RESULTS: There was a similarity in the jaw relation recording methods regarding the distribution of occlusal contact points. There was no difference in the number of occlusal contact points between the anterior (p = 0.439) and posterior (p = 0.227) teeth. No relationship was observed between the distribution and number of occlusal contact points (COR, p = 0.288; DOR, p = 0.183). DOR required less occlusal and clinical adjustment time, on the other hand more laboratory and total workflow time than COR (p < 0.001). CONCLUSION: The DOR may be an option for obtaining the functional space necessary for the assembly of teeth in complete-arch implant-supported fixed prostheses; however, it requires more working time. CLINICAL RELEVANCE: The digital occlusal recording method can be used to assess the interocclusal space for the virtual tooth setup of a complete-arch implant-supported fixed prosthesis.

Assuntos

RESUMO

La microtia es un padecimiento congénito de etiología desconocida que se puede presentar asociado a síndromes, su frecuencia es mayor en hombres, tiene predilección por el oído derecho. Se han propuesto distintas alternativas de tratamiento tanto estéticas como funcionales que disminuyan riesgos y aumenten la calidad de vida de los pacientes. Entre los tratamientos más comunes se encuentra el injerto costocondral, siendo una alternativa viable, aunque de mayor riesgo y que puede necesitar varios procedimientos quirúrgicos con el fin de lograr el mejor resultado estético; por lo mismo, uno de los tratamientos más realizados actualmente, es la reconstrucción auricular con implantes osteointegrados que se colocan en la región mastoidea y soportan una prótesis auricular. Se presenta el caso de un paciente masculino quien fue rehabilitado con implantes mastoideos ostoeintegrados para reconstrucción auricular implantosoportada. Las prótesis implantosoportadas reducen la necesidad de realizar cirugías correctivas y posibilitan la buena higiene de la prótesis al ser ésta removible, pero sin sacrificar su estabilidad. Los sistemas más utilizados son los mismos que se emplean en sobredentaduras, ya que el diseño del aditamento transmucoso, se adapta perfectamente al grosor del epitelio en la región mastoidea, por lo que es una excelente alternativa de tratamiento (AU)

Microtia is a congenital condition of unknown etiology that can occur associated with syndromes. Its frequency is greater in men and has a predilection for the right ear. Different treatment alternatives, both aesthetic and functional, have been proposed that reduce risks and increase the quality of life of patients. Among the most common treatments can be found the costochondral graft being a good alternative although greater risk of failure and the probability of several surgeries to get the best aesthetic result. Because of that one of the most used treatments is the placement of osseointegrated implants that can hold a prosthetic ear. Here is a case of a male patient who was rehabilitated with osseointegrated mastoid implants for ear reconstruction. Implant-supported prostheses significantly reduce the number of surgeries that must be performed and is a good option to maintain excellent hygiene as the prosthetic ear is removable, without compromising stability. The most common system is the same as those used in overdentures since the design of the transmucosal attachment fits perfectly to the thickness of epithelium in mastoid region (AU)

Assuntos

RESUMO

A evolução dos tratamentos em implantodontia possibilitou uma mudança nos tratamentos reabilitadores para pacientes edêntulos, tornando possível a colocação de próteses fixas, que proporcionam maior qualidade de vida para estes pacientes. Para que estas próteses tenham bom desempenho e longevidade satisfatórios é essencial que se mantenha um padrão adequado de higienização bucal e manutenção profissional. Assim, o objetivo deste trabalho foi realizar uma revisão de literatura a respeito dos principais recursos disponíveis para higienização e manutenção das próteses totais fixas sobre implante (protocolo de Branemark), tanto nos cuidados domiciliares dos pacientes quanto no atendimento profissional do cirurgião dentista. Foi realizada uma busca eletrônica, não sistemática, nas bases de dados Lilacs, Pubmed/Medline, Scielo e ScienceDirect, cruzando-se os seguintes descritores: "Higiene Oral"; "Implantes Dentários"; "Implantação Dentária"; "Manutenção"; "Prótese Dentária Fixada por Implante" e "Prótese Dentária". Foram consultados artigos de revisão de literatura, revisão sistemática, meta-análise, estudos clínicos randomizados, além de livros pertinentes ao assunto, publicados no período de 1995 a 2022.Verificou-se na literatura disponível que os principais instrumentos indicados para uso domiciliar são escova dental, fio dental, escova interdental, irrigador oral, dentifrício e enxaguatório. No atendimento profissional em consultório odontológico deve ser dispendida atenção especial às instruções passadas ao paciente e também fazer o possível para motivar e encorajar o seu engajamento na rotina de higienização, além do acompanhamento periodontal, possíveis substituições de parafusos e instalação de placa oclusal estabilizadora, quando necessário. Manter uma higiene oral adequada é essencial para o sucesso das próteses fixas sobre implantes e o cirurgião dentista desempenha um papel crucial não apenas ao realizar o acompanhamento periódico do paciente, mas também ao sugerir os instrumentos mais apropriados, instruir sobre a higiene oral adequada e motivar o paciente a manter a saúde bucal satisfatória(AU)

The evolution of treatments in implantology has enable a change in rehabilitation treatments for edentulous patients, making it possible to place fixed prostheses that provide a better quality of life for these patients. In order to ensure good performance and satisfactory longevity, it is essential to maintain an appropriate standard of oral hygiene and professional maintenance. Thus, the objective of this work was to conduct a literature review on the main resources available for cleaning and maintenance of complete fixed prostheses on implants (Branemark protocol), both in the patients' home care and in the professional care provided by the dentist. A nonsystematic electronic search was carried out in the Lilacs, Pubmed/Medline, Scielo, and ScienceDirect databases, crossing the following descriptors: "Oral Hygiene"; "Dental Implants"; "Dental Implantation"; "Maintenance"; "Dental Prosthesis, ImplantSupported"; and "Prosthodontics". Literature review articles, systematic reviews, meta-analyses, randomized clinical studies, and relevant books on the subject published from 1995 to 2022 were consulted. The literature available indicates that the main instruments recommended for home care are toothbrush, dental floss, interdental brush, oral irrigator, toothpaste, and mouthwash. In the professional dental office, special attention should be given to the instructions given to the patient, as well as to motivate and encourage their engagement in the hygiene routine, in addition to periodontal monitoring, possible screw replacements, and installation of an occlusal splint when necessary. Maintaining adequate oral hygiene is essential for the success of fixed prostheses on implants, and the dentist plays a crucial role, not only in providing periodic patient follow-up, but also in suggesting the most appropriate instruments, instructing on adequate oral hygiene, and motivating the patient to maintain satisfactory oral health(AU)

Assuntos

RESUMO

PURPOSE: The objective of this retrospective study was to evaluate the effect of the interproximal contour of single external hexagon implant restorations on the prevalence of peri-implantitis. MATERIAL AND METHODS: Records of 96 patients and 148 external hexagon (EH) implants with time in function ranging from 1 to 17 years were included in the study. The most recent clinical and radiographic data were collected from records and the prevalence of peri-implantitis was defined according to the 2017 World Workshop on the Classification of Periodontal and Peri-implant Diseases and Conditions. Marginal bone level (MBL), emergence angle (EA), emergence profile (EP), and crown/implant platform horizontal ratio (CIHR) were obtained from periapical radiographs. Dichotomous variables at the patient- and implant level were compared with association tests. Mann-Whitney U-Test was performed to compare continuous quantitative values between the studied groups. Binomial logistic regression was conducted to identify risk indicators associated with the peri-implantitis event at the patient- and implant level, with the significance level set at 5% for all tests. RESULTS: Nineteen patients (19.2%) and 24 implants (16.2%) with a mean time in function of 5.0 ± 4.7 years were classified as having peri-implantitis. No statistically significant differences concerning gender, mean age, implant location in the jaw, or time in function were observed between patients with or without peri-implantitis (p > 0.05). Of 24 implants with peri-implantitis 10 (41.7%) displayed EA ≤ 30° (16.4%) while 14 (58.3%) presented EA > 30° with no statistical difference between the groups (p > 0.05). No statistically significant associations were identified between EA, EP, or CIHR and the prevalence of peri-implantitis. CONCLUSION: The findings seem to indicate that the EA, EP, and CIHR of single restorations over external hexagon implants are not associated with the presence of peri-implantitis. However, prospective studies with larger samples are required to better ascertain such an association in the long term.

Assuntos

RESUMO

PURPOSE: To assess vertical and horizontal fit, screw removal torque, and stress analysis (considered biomechanical aspects) of full-arch implant frameworks manufactured in Ti-6Al-4V through milling, and additive manufacturing Direct Metal Laser Sintering (DMLS) and Electron Beam Melting (EBM), and the effect of the thermo-mechanical treatment Hot Isostatic Pressing (HIP) as a post-treatment after manufacturing. MATERIAL AND METHODS: Maxillary full-arch implant frameworks were made by milling, DMLS, and EBM. The biomechanical assessments were screw removal torque, strain-gauge analyses, and vertical and horizontal marginal fits. The vertical fit was assessed by the single-screw test and with all screws tightened. All frameworks were submitted to a standardized HIP cycle (920°C, 1000 bar pressure, 2 h), and the tests were repeated (α = 0.05). RESULTS: At the initial time, milled frameworks presented higher screw removal torque values, and DMLS and EBM frameworks presented lower levels of strain. Using the single-screw test, milled and DMLS frameworks presented higher vertical fit values, and with all screws tightened and horizontally, higher fit values were found for milled frameworks, followed by DMLS and EBM. After HIP, milling and EBM frameworks presented higher screw removal torque values; the lowest strain values were found for EBM. Using the single-screw test, milled and DMLS frameworks presented higher vertical fit values, and with all screws tightened and horizontally no differences were found. CONCLUSIONS: DMLS and EBM full-arch frameworks presented adequate values of screw removal torque, strain, and marginal fit, although the worst values of marginal fit were found for EBM frameworks. The HIP cycle enhanced the screw removal torque of milled and EBM frameworks and reduced the strain values of milled frameworks. The HIP represents a reliable post-treatment for Ti-6Al-4V dental prostheses produced by milling and EBM technologies.

RESUMO

PURPOSE: This study aimed to develop and evaluate a simple, non-destructive method for assessing the misfit and passivity of implant-retained prostheses frameworks. MATERIALS AND METHODS: To simulate the rehabilitation of a mandible posterior partially edentulous area using 3-unit screw-retained frameworks supported by two implants were fabricated and divided into the following five groups (n = 10 in each group): OP = one-piece framework cast in Co-Cr with the conventional method (control-group); Co-Cr frameworks sectioned and welded by laser (=LAS) or tungsten inert gas (=TIG); Co-Cr CAD-CAM = milled Co-Cr framework; Zir CAD-CAM = milled zirconia framework. The horizontal |X| and vertical |Y| misfits were measured using confocal laser scanning microscopy with one or both screws tightened. Data were analyzed by a two-way ANOVA with repeated measures and Bonferroni correction (α = 0.05). RESULTS: The greatest |X| misfit was observed in the OP group with both screws tightened (290 µm) and one screw tightened (388 and 340 µm). The conventional casting groups sectioned and welded by laser or TIG had lower mean values (235.35 µm, both screws tightened; and 275 µm, one screw tightened) than the OP framework. However, these values still exceeded those of the milled Co-Cr and zirconia frameworks (190 and 216 µm with both screws tightened). Across all reading conditions, every framework subjected to testing consistently maintained vertical |Y| misfit levels below the threshold of 53 µm; however, the milled frameworks exhibited higher vertical misfits than the frameworks obtained by the conventional cast method. CONCLUSIONS: The frameworks, whether cast and sectioned with laser welding or milled from Co-Cr, exhibit improved marginal misfit and enhanced passive fit when compared to other fabrication methods. Additionally, the use of confocal laser scanning microscopy is highly effective for passivity and misfit analysis.

RESUMO

This study evaluated the stress distribution on an implant-supported zirconia crown of a mandibular first molar subjected to oblique loading by occlusal contact with the natural maxillary first molar by using the 3D finite element method. Two virtual models were made to simulate the following situations: (1) occlusion between maxillary and mandibular natural first molars; (2) occlusion between zirconia implant-supported ceramic crown on a mandibular first molar and maxillary natural first molar. The models were designed virtually in a modeling program or CAD (Computer Aided Design) (Rhinoceros). An oblique load of 100 N was uniformly applied to the zirconia framework of the crown. The results were obtained by the Von Mises criterion of stress distribution. Replacement of the mandibular tooth by an implant caused a slight increase in stress on portions of the maxillary tooth roots. The crown of the maxillary model in occlusion with natural antagonist tooth showed 12% less stress when compared with the maxillary (model in occlusion with the) implant-supported crown. The mandibular crown of the implant show 35% more stress when compared with the mandibular antagonist crown on the natural tooth. The presence of the implant to replace the mandibular tooth increased the stresses on the maxillary tooth, especially in the region of the mesial and distal buccal roots.

Assuntos